An experimental investigation of explanations for inconsistencies in responses to second offers in double referenda

This paper demonstrates the potential for induced preference experiments to test previously unverified explanations of observed behavior in contingent valuation surveys. The NOAA Panel on Contingent Valuation called for experimental evidence on potential biases in the double referendum format. We test Carson, Groves, and Machina's (Incentives and informational properties of preference questions, Plenary address to the European Association of Resource and Environmental Economists, Oslo, Norway, June 1999) simple cost uncertainty and weighted averaging explanations of inconsistent responses to follow-up offers in such double referenda against a baseline of certainty and truthful preference revelation. The results find evidence to support the Weighted Average hypothesis. Results regarding the cost uncertainty hypothesis are more ambiguous and merit further investigation.     

Relationships between porewater nutrients and seagrasses in a subtropical carbonate environment

The feeding, diet and egg production of the copepod Acartia tonsa were dermined during ten experiments in Los Angeles Harbor, California, between November 1986 and October 1987. Copepods were incubated in situ, in quasi-natural food environments. Water temperatures ranged from 14.6 to 21.5°C. Particulate organic carbon and nitrogen (POC and PON) were high (534 to 3710 g Cl^-1, 51 to 459 Nl^-1) but dominated by small (<8 m diam) particles. Plankton (phytoplankton and microzooplankton) C-biomass composed about 10% of the total POC and was usually dominated by particles >8 m. Plankton biomass was always low. Daily ingestion rates ranged from 3 to 96% of body C; egg production ranged from 4 to 35% of body carbon. Mean ingestion and egg production rates during spring-summer were 1.9 and 1.5 times higher than average for the entire study, respectively. The average gross efficiency of egg production for the study was 80%; the spring-summer mean was 41%. Bivariate and multiple-regression analyses revealed that the ingestion rate was dependent upon both temperature and food availability, but that, below 21°C, egg production depended more upon temperature than upon food concentration. To detect dietary preferences, the composition of diet was compared with that of the food supply. Selective feeding was infrequent, but the diet was often dominated by dinoflagellates and ciliates. It would appear that within metabolic limits governed by temperature, the feeding response of A. tonsa is dependent upon food concentration, while egg production depends more on qualitative attributes of the food supply.     

Direct capture of carbon dioxide from air via lime-based sorbents

Mitigation and Adaptation Strategies for Global Change - Direct air capture (DAC) is a developing technology for removing carbon dioxide (CO2) from the atmosphere or from low-CO2-containing...     

The influence of metallurgy on the formation of welding aerosols

Recent research has indicated that insoluble ultrafine aerosols (ie., particles whose physical diameters are less than 100 nm) may cause adverse health effects due to their small size, and that toxicological response may be more appropriately represented by particle number or particle surface area. Unfortunately, current exposure criteria and the associated air-sampling techniques are primarily mass-based. Welding processes are high-temperature operations that generate substantial number concentrations of ultrafine aerosols. Welding aerosols are formed primarily through the nucleation of metal vapors followed by competing growth mechanisms such as coagulation and condensation. Experimental results and mathematical tools are presented to illustrate how welding metallurgy influences the chemical aspects and dynamic processes that initiate and evolve the resultant aerosol. This research suggests that a fundamental understanding of metallurgy and aerosol physics can be exploited to suppress the formation of undesirable chemical species as well as the amount of aerosol generated during a welding process.     

Integration of modeling,monitoring and laboratory observation to determine reasons for air quality violations

An attempt was made to explain ambient air quality violations in the vicinity of industrial plants. Micrometeorology, diffusion calculaations, ambient readings, and plant engineering data are all taken into consideration to ascertain whether the plant is or is not the principal offender.Scrutiny of hi-vol filters using scanning electron microscopy for particle size analysis and particle chemical make-up as an assessment technique is also described.Case histories using the above analytical techniques are discussed.Presented at the 16th National Conference on Energy and the Environment, May 23, 1979     

Use of cluster and principal component analyses to profile areas in California where ground water has been contaminated by pesticides

An empirical approach to profiling areas of ground water contamination by pesticides was devised that did not rely upon determining the level of vulnerability between land areas and that did not assume any particular pathway for ground water contamination. Climatic and soil data were obtained for 1-square mile sections of land in California where pesticide residues had been found in well water samples and the detection was attributed to legal agricultural applications. These sections were designated as known contaminated (KC) sections. Climate and soil data were also obtained for sections which lacked either well sampling data or a positive pesticide detection. These sections were designated as candidate sections. Statistical procedures were used to cluster groups of KC sections first with respect to climate characteristics and then with respect to soil characteristics. Principal components analysis (PCA) was used to construct a statistical profile of soil variables for each cluster of KC sections. A method based on the PCA was developed to compare the similarity of soil profiles derived for each KC section cluster to individual candidate sections. Since the profiling scheme was based only on data from KC sections, candidate sections that did not match any KC cluster profile could only be considered dissimilar to contaminated sections, receiving a status of not-classified. This profiling method is flexible and it can be revised to incorporate updated well sampling information.     

Characterization of microbial communities from coastal waters using microarrays

Molecular methods, including DNA probes, were used to identify and enumerate pathogenic Vibrio species in the Chesapeake Bay; our data indicated that Vibrio vulnificus exhibits seasonal fluctuations in number. Our work included a characterization of total microbial communities from the Bay; development of microarrays that identify and quantify the diversity of those communities; and observation of temporal changes in those communities. To identify members of the microbial community, we amplified the 16S rDNA gene from community DNA isolated from a biofilm sample collected from the Chesapeake Bay in February, 2000. The resultant 75 sequences were 95% or more similar to 7 species including two recently described Shewanella species, baltica and frigidimarina, that have not been previously isolated from the Chesapeake. When the genera of bacteria from biofilm after culturing are compared to those detected by subcloning amplified 16S fragments from community DNA, the cultured sample exhibited a strong bias. In oysters collected in February, the most common bacteria were previously unknown. Based on our 16S findings, we are developing microarrays to detect these and other microbial species in these estuarine communities. The microarrays will detect each species using four distinct loci, with the multiple loci serving as an internal control. The accuracy of the microarray will be measured using sentinel species such as Aeromonas species, Escherichia coli, and Vibrio vulnificus. Using microarrays, it should be possible to determine the annual fluctuations of bacterial species (culturable and non-culturable, pathogenic and non-pathogenic). The data may be applied to understanding patterns of environmental change; assessing the health of the Bay; and evaluating the risk of human illness associated with exposure to and ingestion of water and shellfish.     

Total versus inhalable sampler comparison study for the determination of asphalt fume exposures within the road paving industry

Exposure to asphalt fumes has a threshold limit value (TLV of 0.5 mg m(-3) (benzene extractable inhalable particulate) as recommended by the American Conference of Governmental Industrial Hygienists (ACGIH). This reflects a recent change (2000) whereby two variables are different from the previous recommendation. First is a 10-fold reduction in quantity from 5 mg m(-3) to 0.5 mg m(-3). Secondly, the new TLV specifies the "inhalable" fraction as compared to what is presumed to be total particulate. To assess the impact of these changes, this study compares the differences between measurements of paving asphalt fume exposure in the field using an "inhalable" instrument versus the historically used 'total' sampler. Particle size is also examined to assist in the understanding of the aerodynamic collection differences as related to asphalt fumes and confounders. Results show that when exposures are limited to asphalt fumes, a 1:1 relationship exists between samplers, showing no statistically significant differences in benzene soluble matter (BSM). This means that for the asphalt fume ACGIH TLV, the 'total' 37-mm sampler is an equivalent method to the "inhalable" method, referred to as IOM (Institute of Occupational Medicine), and should be acceptable for use against the TLV. However, the study found that when confounders (dust or old asphalt millings) are present in the workplace, there can be significant differences between the two samplers' reported exposure. The ratio of IOM/Total was 1.37 for milling asphalt sites, 1.41 for asphalt paving over granular base, and 1.02 for asphalt over asphalt pavements.     

Rapid prenatal diagnosis of Patau's syndrome in a fetus with an abdominal wall defect by 72 hour culture of cells from amniotic fluid

A woman in the 32nd week of pregnancy was referred for investigation because of fetal abnormalities, including an abdominal wall defect, detected by ultrasonography. In view of the increased risk of chromosome abnormality, amniocentesis was performed to enable informed decisions about the management of the pregnancy and delivery to be taken. Cells from the liquor were inoculated into standard lymphocyte culture medium and incubated for 72 h. Slides with a high mitotic index and good quality metaphases, comparable to those from a blood culture, were obtained after harvesting. Cytogenetic analysis showed the karyotype to be 46,XY,—14,+t(13ql4q), which is consistent with Patau's syndrome. This technique appears to be an option for rapid karyotyping in cases of abdominal wall defect, where a chromosomal abnormality is suspected.