Emissions and risks associated with oxyfuel combustion: State of the science and critical data gaps

Oxyfuel combustion is a promising technology that may greatly facilitate carbon capture and sequestration by increasing the relative CO₂ content of the combustion emission stream. However, the potential effect of enhanced oxygen combustion conditions on emissions of criteria and hazardous air pollutants (e.g., acid gases, particulates, metals and organics) is not well studied. It is possible that combustion under oxyfuel conditions could produce emissions posing different risks than those currently being managed by the power industry (e.g., by changing the valence state of metals). The data available for addressing these concerns are quite limited and are typically derived from laboratory-scale or pilot-scale tests. A review of the available data does suggest that oxyfuel combustion may decrease the air emissions of some pollutants (e.g., SO₂, NOx, particulates) whereas data for other pollutants are too limited to draw any conclusions. The oxy-combustion systems that have been proposed to date do not have a conventional “stack” and combustion flue gas is treated in such a way that solid or liquid waste streams are the major outputs. Use of this technology will therefore shift emissions from air to solid or liquid waste streams, but the risk management implications of this potential change have yet to be assessed. Truly useful studies of the potential effects of oxyfuel combustion on power plant emissions will require construction of integrated systems containing a combustion system coupled to a CO₂ processing unit. Sampling and analysis to assess potential emission effects should be an essential part of integrated system tests.

Implications: Oxyfuel combustion may facilitate carbon capture and sequestration by increasing the relative CO₂ content of the combustion emission stream. However, the potential effect of enhanced oxygen combustion conditions on emissions of criteria and hazardous air pollutants has not been well studied. Combustion under oxyfuel conditions could produce emissions posing different risks than those currently being managed by the power industry. Therefore, before moving further with oxyfuel combustion as a new technology, it is appropriate to summarize the current understanding of potential emissions risk and to identify data gaps as priorities for future research.     

Nachhaltigkeit in der Pflanzenproduktion

Zusammenfassung  Teil I gibt einen überblick über den Ursprung und die Entwicklung des Begriffes “Nachhaltigkeit” im allgemeinen und für die Landwirtschaft im speziellen. Demnach wird Nachhaltigkeit zwar unter ?kologischen, sozialen und ?konomischen Aspekten diskutiert; eine allgemein anerkannte Definition des Begriffes existiert bisher jedoch weder für die jeweiligen Einzelaspekte noch unter Zusammenführung aller drei Aspekte. Dies erschwert die Ermittlung und Umsetzung der Nachhaltigkeit in der Praxis. Ausgehend von der Begriffsentwicklung und den wesentlichen heute definierten Begriffsinhalten wird deshalb für eine nachhaltige Pflanzenproduktion aus prim?r ?kologischer Sicht eine Definition vorgeschlagen. Sie dient als Grundlage für einen methodischen Ansatz, der eine Operationalisierung und damit eine Umsetzung der Nachhaltigkeit der Pflanzenproduktion in der Praxis erm?glichen soll (?Teil II).      

Comparison of IEUBK model predictions and actual blood lead values at a former battery recycling site

This paper presents an evaluation of US EPA's integrated exposureuptake biokinetic model for lead (IEUBK model) using data obtained during emergency removal operations at a former lead-acid battery recycling plant and the surrounding community. Data employed in the study include soil lead and interior dust lead, air lead levels collected at the site perimeter, drinking water lead levels at the community water main and blood lead data collected from an annual blood lead monitoring programme conducted over a four year period during the remediation activities.Geometric mean soil and dust concentrations were found to be a better predictor of blood lead than arithmetic mean data. However, weight based dust lead data were believed to be an inappropriate measure of dust lead levels. Estimates of household dust lead concentrations based upon surface loading data (g m^–2) yielded blood lead predictions which were more consistent with data collected in the blood lead monitoring programme     

Influence of volunteer and project characteristics on data quality of biological surveys

Volunteer involvement in biological surveys is becoming common in conservation and ecology, prompting questions on the quality of data collected in such surveys. In a systematic review of the peer‐reviewed literature on the quality of data collected by volunteers, we examined the characteristics of volunteers (e.g., age, prior knowledge) and projects (e.g., systematic vs. opportunistic monitoring schemes) that affect data quality with regards to standardization of sampling, accuracy and precision of data collection, spatial and temporal representation of data, and sample size. Most studies (70%, n = 71) focused on the act of data collection. The majority of assessments of volunteer characteristics (58%, n = 93) examined the effect of prior knowledge and experience on quality of the data collected, often by comparing volunteers with experts or professionals, who were usually assumed to collect higher quality data. However, when both groups’ data were compared with the same accuracy standard, professional data were more accurate in only 4 of 7 cases. The few studies that measured precision of volunteer and professional data did not conclusively show that professional data were less variable than volunteer data. To improve data quality, studies recommended changes to survey protocols, volunteer training, statistical analyses, and project structure (e.g., volunteer recruitment and retention).     

Nachhaltigkeit in der Pflanzenproduktion

The purpose of part II is to develop and to discuss a methodological approach for the practical implementation of sustainable crop production. In part I the term “sustainable crop production” has been defined and explained. Based on this definition the approach presented here entails several steps starting with the identification of the whole range of crop management measures and the emissions and other releases associated with them. Through an impact pathway assessment these releases are traced from their point of origin, the farm or production level, to their end points, namely agroecosystems and adjacent ecosystems. At the ecosystem level condition-indicators, which describe the condition of the ecosystems affected by agricultural crop production measures, need to be selected. For these condition-indicators threshold values (i.e. maximally tolerable values) have to be determined. These should not be exceeded if irreversible changes in the respective ecosystems and ecosystem compartments are to be avoided. By tracing the maximally tolerable values back along their impact pathway, they are transposed to the level of crop production. At the farm level they prescribe a framework within which agricultural crop production must remain to prevent irreversible changes in the affected ecosystems. The framework consists of production indicators and their respective threshold values (i.e. critical uses of farm inputs), which have to be adhered to in order to ensure sustainable crop production.     

Source apportionment of primary and secondary organic aerosols using positive matrix factorization (PMF) of molecular markers

Monthly average ambient concentrations of more than eighty particle-phase organic compounds, as well as total organic carbon (OC) and elemental carbon (EC), were measured from March 2004 through February 2005 in five cities in the Midwestern United States. A multi-variant source apportionment receptor model, positive matrix factorization (PMF), was applied to explore the average source contributions to the five sampling sites using molecular markers for primary and secondary organic aerosols (POA, SOA). Using the molecular makers in the model, POA and SOA were estimated for each month at each site. Three POA factors were derived, which were dominated by primary molecular markers such as EC, hopanes, steranes, and polycyclic aromatic hydrocarbons (PAHs), and which represented the following POA sources: urban primary sources, mobile sources, and other combustion sources. The three POA sources accounted for 57% of total average ambient OC. Three factors, characterized by the presence of reaction products of isoprene, α-pinene and β-caryophyllene, and displaying distinct seasonal trends, were consistent with the characteristics of SOA. The SOA factors made up 43% of the total average measured OC. The PMF-derived results are in good agreement with estimated SOA concentrations obtained from SOA to tracer yield estimates obtained from smog chamber experiments. A linear regression comparing the smog chamber yield estimates and the PMF SOA contributions had a regression slope of 1.01 ± 0.07 and an intercept of 0.19 ± 0.10 μg OC m^?3 (adjusted R² of 0.763, n = 58).     

Nachhaltigkeit in der Pflanzenproduktion

Part I gives an overview on the origin and the development of the term “sustainability” in general and for agriculture in particular. This overview shows that the term “sustainability” is used widely in discussing ecological, social and economic aspects; however, there is no generally accepted definition for this term neither for the different aspects, nor for a concept including all the discussed aspects of “sustainability”. This makes a determination and practical implementation of the term “sustainability” difficult. Therefore a definition for a sustainable crop production from the ecological point of view is elaborated based on the discussion of the development of the term and on the identification of the most important applied aspects. This definition forms the basis for a methodological approach to the practical implementation of a sustainable crop production (»part II).     

Investigation of a systematic offset in the measurement of organic carbon with a semicontinuous analyzer

Organic carbon (OC) was measured semicontinuously in laboratory experiments of steady-state secondary organic aerosol formed by hydrocarbon + nitrogen oxide irradiations. Examination of the mass of carbon measured on the filter for various sample volumes reveals a systematic offset that is not observed when performing an instrumental blank. These findings suggest that simple subtraction of instrumental blanks determined as the standard analysis without sample collection (i.e., by cycling the pump and valves yet filtering zero liters of air followed by routine chemical analysis) from measured concentrations may be inadequate. This may be especially true for samples collected through the filtration of small air volumes wherein the influence of the systematic offset is greatest. All of the experiments show that filtering a larger volume of air minimizes the influence of contributions from the systematic offset. Application of these results to measurements of ambient concentrations of carbonaceous aerosol suggests a need for collection of sufficient carbon mass to minimize the relative influence of the offset signal.     

Plausibility of toxicological interaction between lead and methylmercury

Humans are exposed to both lead (Pb) and methylmercury (MeHg), two chemicals known to affect the developing nervous system. It is therefore important to know whether these chemicals interact toxicologically to develop reliable estimates of human health risks. The nature of the potential interaction and how it may change with dose are also critical factors which need to be understood and considered in risk assessment. The available toxicological literature was reviewed and yielded five animal studies which involved combined exposure to both metals. None of these studies examined developmental neurotoxicity, the key endpoint of interest. Doses in these studies were also in the range of 1–100?mg?kg^?1?day^?1, which is far above average exposure levels for Pb and MeHg in the U.S. population. The combined exposure literature is therefore uninformative concerning the potential for Pb–MeHg interaction. A subsequent evaluation of the available mechanistic data was conducted, looking for similarities in proposed modes of action relevant at low doses. Shared biological targets suggesting a potential for low dose interaction include protein kinase C, calcium homeostasis, and apoptosis. Whether interaction actually occurs, and the form the interaction might take, remains to be studied. A phased research program is proposed that may provide data needed to address this significant data gap and permit more robust Pb and MeHg risk assessment.