Dystrophin protein and rflp analyis for fetal diagnosis and carrier confirmation of duchenne muscular dystrophy

A pregnant woman with indeterminate Duchenne muscular dystrophy (DMD) carrier status, but with DMD diagnosed in her deceased brother (unavailable for study), presented for prenatal diagnosis, intending to continue the pregnancy only if proven unaffected with DMD with near absolute certainty. Creatine kinase (CK) assays to clarify carrier status were inconclusive. Male sex in the fetus was identified, but DNA restriction fragment length polymorphism (RFLP) analysis was not yet available to this centre to investigate the possible transmission of the DMD gene, and the pregnancy was terminated. Tissue histology and dystrophin protein analysis demonstrated the absence of DMD. In a situation with proven maternal carrier status, future fetal inheritance of the opposite maternal X chromosome would indicate the presence of DMD. However, maternal carrier status remained in doubt through a second pregnancy, even with RFLP studies, and was finally established when dystrophin analysis confirmed the presence of DMD in the second fetus. Histologic findings are presented, contrasting features in the two fetuses. The value of dystrophin analysis for establishing the diagnosis of fetal DMD, in this case proving maternal carrier status in a difficult situation, and for demonstrating DMD gene:RFLP haplotype relationships is illustrated.     

Estrogen equivalent concentration of 13 branched para-nonylphenols in three technical mixtures by isomer-specific determination using their synthetic standards in SIM mode with GC-MS and two new diasteromeric isomers

Thirteen isomers of branched para-nonylphenols (para-NP) in three technical mixtures were isomer-specifically determined using their synthesized standards by SIM of structurally specific ions, m/z 135, 149 or 163 with GC–MS. Of the 13 isomers, four isomers, 4-(2,4-dimethylheptan-4-yl)phenol, 4-(4-methyloctan-4-yl)phenol, 4-(3-ethyl-2-methylhexan-2-yl)phenol (3E22NP) and 4-(2,3-dimethylheptan-2-yl)phenol synthesized for their determinations were first used as standard substances. The 13 isomers in the technical mixtures individually occurred at mass percent portion of more than 2%. The total mass percent portions in the mixtures from Tokyo Chemical Industry (TCI), Aldrich, and Fluka covered with 89 ± 2%, 75 ± 4% and 77 ± 2%, respectively. The abundance of 4-(3,6-dimethylheptan-3-yl)phenol in the three mixtures was the largest with 11.1 ± 2% to 9.9 ± 0.3%, while that of 4-(2-methyloctan-2-yl)phenol was the smallest with 2.9 ± 0.3% to 3.0 ± 0.2%. Additionally, structures of four new isomers of more than 1% portion present in a technical mixture were elucidated as two pairs of diastereomeric isomers: two types of 4-(3,4-dimethylheptan-4-yl)phenol (344NP) and those of 4-(3,4-dimethylheptan-3-yl)phenol (343NP). By estrogenic assay of 13 isomers with yeast estrogen screen system, the activity of 3E22NP was the highest, while that of 4-(3-methyloctan-3-yl)phenol was the least. Their relative activities to that of 3E22NP were individually calculated. Estrogenic equivalent concentrations of the three technical mixtures were predictively evaluated. The ratio of the EEC to the conventional concentration, total mass percent portions of the 13 isomers in technical mixtures were 0.208 for TCI, 0.206 for Aldrich and 0.205 for Fluka. The predicted estrogenic activity of measured concentration of para-NP in technical mixtures was approximately 5-fold greater than the measured estrogen agonist activity.     

Separation, synthesis and estrogenic activity of 4-nonylphenols: two sets of new diastereomeric isomers in a commercial mixture

Two sets of new diastereomeric 4-nonylphenol (NP) isomers [4-(3,4-dimethylheptan-4-yl)phenol (344NP, NP-J, L) and 4-(3,4-dimethylheptan-3-yl)phenol (343NP, NP-K, P)] were separated from a commercial NP mixture. The mixture of these diastereomers was synthesized at the same time by a single Friedel-Crafts reaction of 3,4-dimethyl-4-heptanol and phenol, and the mixture was separated into individual NPs by HPLC equipped with Hypercarb column. For the first time, in this study the stereostructure-estrogenic activity relationship of NP diastereomers was investigated. The NP isomers (NP-L and NP-P) having the beta-methyl group over the benzene ring were found to be 2-4 times more estrogenic than their diastereomers (NP-J and NP-K). In the case of the other set of diastereomer [4-(3,5-dimethylheptan-3-yl)phenol, (353NP, NP-E, G)] containing gamma-methyl group in the molecule, the gamma-methyl proton signal (delta 0.49) in the more estrogenic isomer (NP-G) also appeared in a higher field than the corresponding methyl signal (delta 0.76) of the less estrogenic isomer (NP-E).     

Influence of palladium content dispersed in the TiO2 photocatalyst for degradation of volatile organic compounds in gas emission

Heterogeneous photocatalysis is highlighted to treat volatile organic compound (VOC) emission. Then, this work analysed the influence of palladium (Pd) content loaded in TiO₂ on n-octane and iso-octane photodegradation. For this, TiO₂ was loaded with Pd in different contents: 0.4%, 0.7%, and 1.0%. The samples were characterized, and the photodegradation experiments were conducted by Pd/TiO₂/UV process. The characterization analyses showed that the metal presence did not change the catalyst structure or its surface area; however, it reduced the bandgap energy. The photocatalytic results proved that palladium improved n-octane degradation from 62% (pure TiO₂) to 92.6% (0.4%Pd/TiO₂) and, iso-octane degradation enhanced from 59% (pure TiO₂) to 90.6% (0.7%Pd/TiO₂); all results were obtained in the space time of 39 s. Therefore, 0.4%Pd/TiO₂ and 0.7%Pd/TiO₂ showed better oxidation results to degradation n-octane and iso-octane, respectively. The kinetic model of pseudo-first order showed a good fit for the data of both VOCs. Heterogeneous photocatalysis with Pd/TiO₂ showed to be an adequate technique to reduce VOCs emission.

     

Generation of cyanide ion by the reaction of phenol with nitrous acid in wastewater

It was found that phenol reacts with nitrous acid to produce cyanide ions. Cyanide ion generation is attributed to the conversion of phenol to nitrosophenol through the well-known nitrosation reaction, and decomposition of benzoquinonoxim to form cyanide and aliphatic compound.     

Use of lees materials as an adsorbent for removal of organochlorine compounds or benzene from wastewater

Lees materials such as wheat bran, rapeseed, linseed, okara (lees of bean curd), and sakekasu (sake lees) were found to effectively adsorb organochlorine compounds. The amounts of these compounds such as chloroform, dichloromethane, and benzene adsorbed were plotted against the equilibrium concentration of substances in solution on a logarithmic scale. A linear relationship was obtained, indicating that the adsorption reactions were of the Freundlich type. When the lees materials were applied to wastewater (pH: 10) containing 0.1 g/l of dichloromethane, dichloromethane was removed from the wastewater in the range of 70-90% efficiency after 90 min. There was a high correlation between the removal efficiency and the number of spherosomes, which are intracellular particles attributed to the uptake of organochlorine compounds.     

Determination of nonylphenol ethoxylates and octylphenol ethoxylates in environmental samples using 13C-labeled surrogate compounds

Alkylphenol polyethoxylates (APEOs) have been widely used as nonionic surfactants in a variety of industrial and commercial products. Typical compounds are nonylphenol polyethoxylates (NPEOs) and octylphenol polyethoxylates (OPEOs), which serve as precursors to nonylphenol (NP) and octylphenol (OP), respectively. NP and 4-t-OP are known to have endocrine disrupting effects on fish (medaka, Oryzias latipes), so it is important to know the concentrations of APEOs in the environment. Because the analytical characteristics of these compounds depend on the length of the ethoxy chain, it is necessary to use appropriate compounds as internal standards or surrogates. We synthesized two 13C-labeled surrogate compounds and used these compounds as internal standards to determine NPEOs and OPEOs by high-performance liquid chromatography (LC)-mass spectrometry. Method detection limits were 0.015 microg/L for NP (2)EO to 0.037 microg/L for NP(12)EO, and 0.011 microg/L for OP(3,6)EO to 0.024 microg/L for OP (4)EO. NPEO concentrations in water from a sewage treatment plant were less than 0.05-0.52 microg/L for final effluent and 1.2-15 microg/L for influent. OPEO concentrations were less than 0.05-0.15 microg/L for the final effluent and less than 0.05-1.1 microg/L for influent.     

Contamination and bioaccumulation of benzotriazole ultraviolet stabilizers in fish from Manila Bay, the Philippines using an ultra-fast liquid chromatography-tandem mass spectrometry

Methyl methacrylate (MMA) is grafted on multiwalled carbon nanotubes (MWCNTs) by using N₂ plasma technique. The MMA grafted MWCNTs (MWCNT-g-pMMA) are characterized by using Raman spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, thermo gravimetric analysis-differential thermal analysis (TGA-DTA), and potentiometric acid-base titration method. The application of MWCNT-g-pMMA in the removal of 4,4′-dichlorinated biphenyl (4,4′-DCB) from large volumes of aqueous solutions is investigated under ambient conditions. The results indicate that the adsorption of 4,4′-DCB on MWCNT-g-pMMA is much higher than that of 4,4′-DCB on MWCNTs, and the adsorbed 4,4′-DCB is difficult to be thermally decomposed from MWCNT-g-pMMA according to the TGA-DTA analysis. MWCNT-g-pMMA are suitable materials in the preconcentration and immobilization of polychlorinated biphenyls (PCBs) from large volumes of aqueous solutions in environmental pollution cleanup.     

Biomonitoring for exposure to multiple trace elements via analysis of urine from participants in the study of metals and assisted reproductive technologies (SMART)

Humans are exposed to concentrations of multiple trace elements through a variety of background sources; many are suspected reproductive toxicants. Prior to investigating associations between trace elements and human reproductive health, potential biomarkers of exposure should be characterized by sources of variability in the population at risk. Factors influencing elemental exposure should also be identified to ensure their consideration as potential confounding variables. The principal aim of this study is to characterize sources of variability for 19 trace elements measured in urine specimens collected from 55 women and 36 male partners completing a 1st cycle of in vitro fertilization (IVF). Urine specimens were analyzed using a biomonitoring method based on inductively coupled plasma-mass spectrometry (ICP-MS). Randomly selected urine specimens (～6%) were analyzed in duplicate, and these data were used to characterize sources of variability. Nine trace elements including As, Ba, Cd, Cs, Co, Cu, Mn, Mo, and Zn, were quantified in most specimens, indicating their utility in future epidemiologic studies of trace elements exposure and IVF outcomes. With few exceptions, normalizing urine using the traditional creatinine-correction procedure, or an alternative approach based on a linear regression model, increased residual variability only slightly. Sex and race appear to be important factors to consider in epidemiologic studies conducted in this population. Urine concentrations for most elements are similar to those reported in the 2005-2006 National Health and Nutrition Examination Survey (NHANES); however, differences in others may indicate regional trends or a unique exposure history for this infertile study population.