An unconventional method for the recovery of caustic soda from spent Al-rich pickling solutions

This work presents an unconventional procedure for the recovery of spent Al-rich caustic soda solutions from the pickling of dies for the production of aluminium extrusions. Caustic soda was regenerated at roughly 70%, by precipitating aluminate, after addition of a silica source, in the form of zeolite A, a microporous material that is widely used in many technological sectors. It was shown that the process is reliable and can be repeated for several cycles, provided the concentration of the caustic soda solution is suitably restored. The by-product obtained, zeolite A, proved to be a high-grade material with performance as a cation exchanger and physical sorbent that is certainly comparable to that reported in literature (e.g., cation exchange capacity equal to 5.14 meq g(-1) vs. 5.48 meq g(-1) and water vapour adsorption capacity of 26.5% vs. 27.6% at 16 torr and 298 K). The economics of the process, although not examined yet, would appear generally favourable, considering that zeolite A is a valuable by-product which widely covers the costs for the recovery of the spent solutions. There are, therefore, significant prospects for the use of zeolite A, particularly as a builder in detergent formulation.     

A survey of storm-water management water quality regulations in four Mid-Atlantic States

This paper examines and compares the management practices and regulatory approaches used by the Mid-Atlantic States of Delaware, Maryland, New Jersey, and Pennsylvania for improving the quality of storm-water runoff. Such practices range from simple extended detention criteria in Pennsylvania through the BMP credit system used by Maryland, to the latest "green technology" methods promoted in Delaware and the recharge, quality and peak reduction approaches of New Jersey. All practices are designed to meet EPA requirements for total suspended solids (TSS) removal, but verification of performance is not required. More sophisticated methods of evaluating TSS removal that can be used for engineering design purposes are needed.     

Chlorpyrifos acute exposure induces hyperglycemia and hyperlipidemia in rats

In this study we evaluated the hyperglycemic and hyperlipidemic effects of chlorpyrifos (CPF) after an acute exposure in rats. The mechanisms involved in hyperglycemia induced by CPF were studied. A single dose of CPF (50 mg kg⁻¹, subcutaneous, s.c.) was administered to overnight-fasted rats. Glucose and corticosterone levels, lipid status and paraoxonase (PON1) activity were determined in plasma of rats. Cardiovascular risk factors and the atherogenic index were calculated. Glycogen levels, tyrosine aminotransferase (TAT) and glucose-6-phosphatase (G6Pase) activities were determined in livers of rats. Cerebral acetylcholinesterase (AChE) activity was also determined. CPF caused an increase in glucose and glycogen levels as well as in TAT and G6Pase activities. The CPF exposure caused an increase in corticosterone levels, an inhibition of AChE activity and a reduction of PON1 activity. Regarding the lipid status, CPF induced an increase in triglycerides (TG) and low-density lipoprotein-cholesterol (LDL) levels and a decrease in high-density lipoprotein (HDL) levels associated with an increase of cardiovascular risk factors and the atherogenic index. The present study demonstrated that a single CPF administration caused hyperglycemia and hyperlipidemia in rats. The activation of the gluconeogenesis pathway, probably elicited by hypercorticosteronemia, is involved in the hyperglycemic effect of CPF in rats.     

Diphenyl diselenide attenuates hepatic and hematologic toxicity induced by chlorpyrifos acute exposure in rats

Purpose

In this study, we investigated the effect of diphenyl diselenide [(PhSe)₂] on chlorpyrifos (CPF)-induced hepatic and hematologic toxicity in rats.

Methods

Rats were pre-treated with (PhSe)₂ (5?mg/kg) via the oral route (oral gavage) once a day for 7?days. On the eighth and ninth days, rats were treated with (PhSe)₂ (5?mg/kg) 30?min prior to CPF (50?mg/kg, by subcutaneous route). The aspartate aminotransferase, alanine aminotransferase, and lactate dehydrogenase activities were determined in plasma of rats. Lipid peroxidation, protein carbonyl, and non-protein thiol levels as well as catalase, superoxide dismutase, glutathione peroxidase, glutathione reductase, and gluthatione S-transferase activities were determined in livers of rats. Hematological parameters were also determined.

Results

The results showed that CPF caused hepatic oxidative damage, as demonstrated by an increase in lipid peroxidation and protein carbonyl levels which was associated with a decrease in antioxidant defenses. CPF exposure caused a reduction in the leukocyte, indicating hematologic toxicity. (PhSe)₂ was effective in attenuating these toxic effects caused by CPF exposure in rats.

Conclusions

The results indicated that (PhSe)₂ was effective in protecting the hepatic and hematologic toxicity induced by acute CPF exposure in rats.     

Sustainability of sand dune restoration along the coast of the Tyrrhenian sea

This study reports the results of restoration management on sand dune environments along the coastal belt of the Castelporziano nature reserve (Rome, Italy) and the subsequent monitoring phases to test the sustainability of the ‘soft techniques’ applied. In the area concerned, over a length of ca. 3 km, 40 dunes were built up along with three belts located at <40 m, 40–70 m, and >70 m, respectively, from the shoreline. On each of 38 dunes 20 individuals ofAmmophila littoralis were planted; this species is one of the local autochthonous species considered particularly suitable for stabilizing sand dunes. After one year, two years and five years, respectively the changes in height and surface of each dune, the survival rates ofA. littoralis, and its changes in cover, the appearance of new shoots and the establishment of new species were observed. A progressive increase in species number, which five years after the restoration amounted to about 60% of those characterizing the natural dunes, was reported indicating a progressive trend towards populations similar to natural ones. In the colonization of new species there is a prevalence of theSporobolus-Elymetum farcti and theSalsolo Kali-Cakiletum maritimae association, while the species established successively refer to theEchinophoro spinosae-Ammophiletum arundinaceae association and theCrucianellion maritimae alliance as occurring in natural successions. This succession runs parallel to the natural dune colonization processes. In particular, the data regarding survival, cover and number of vegetative shoots indicate that the dune belt between 40 and 70 m from the sea is the one most suitable for restoration. Some changes in dune morphology was observed: the height of the artificial dunes tended to decrease considerably in the five years of observation, whereas a progressive increase in their surface area was observed. During the study period.A littoralis favoured the establishment of new species, but as yet exercises no action on increasing dune height.     

A preliminary investigation on the use of organic ionic liquids as green solvents for acylation and oxidation reactions

Different organic ionic liquids (OILs) have been used as green solvents in Friedel–Crafts acylation and alcohol oxidation reactions. Specifically, three OILs were employed, 1-ethyl-3-methylimidazolium chloride, tetraethylammonium bromide, and 1-butyl-3-methylimidazolium chloride, and four reactions studied, acylation of toluene by acetyl chloride, acylation of benzene by propionyl chloride, oxidation of benzyl alcohol by N-methylmorpholine N-oxide, and oxidation of salicylic alcohol by o-iodoxybenzoic acid. The reactions were carried out, at room temperature, in a well-stirred lab-scale glass batch reactor, under inert atmosphere and for reaction times ranging from 5 to 90 min. Gas chromatography was employed to characterize the reaction products. First of all, the desired products yield as a function of the reaction time was investigated. Moreover, simple kinetic models were built for the interpretation of the experimental results. Additional tests were carried out to assess the possibility of recycling the OILs employed. The results of this preliminary study were satisfactory as the OILs investigated proved to be good media in which to carry out the reactions studied in this work (desired products yield greater than 90% were achieved). Moreover, the reaction rate expressions of the kinetic models were able to satisfactorily predict the experimental results. Finally, the possibility of recycling the OIL (in one of the reactions) was proved to be feasible and this suggests the use of recycled OIL together with a fresh make-up, to match high yield values with economical/ecological advantages.     

Pricing behaviour and market power in North American non-ferrous metal industries

The paper considers the degree to which declining market power explains modifications in pricing behaviour observed since the late 1970s in the North American aluminium, copper, lead and zinc industries. More precisely, it relates those changes in pricing policies to the price elasticity of demand facing the dominant strategic group in each industry, the cost elasticity of supply and to the management's ability to coordinate or internalize conduct decisions. The results suggest that the firms in the copper and lead industries do not hold as a group any form of market power. In the case of the aluminum industry, a notable increase in the price elasticity of demand since the end of the 1970s, a sustained decrease in the concentration ratio and a rigid production process are weakening the presence of market power in that industry. The results are inconclusive in the case of the zinc industry since the determinants of market power move in opposite directions.     

Has the bell tolled for the North American mineral and metal industry?

The author examines the reasons behind the current state of the North American metal mining industry. Taking demand-side factors first, he explains the dramatic fall in metals consumption. External shocks are seen to have affected the previously well rationalized structure of supply in the 1960s, bringing about an increase in production costs and limiting capacity for industrial rationalization. At the beginning of the 1980s, the situation is seen to have been exacerbated by a larger number of producers, more supply sources and an increase in costs. During the course of the decade, the author relates how the situation worsened due to the strength of the US dollar and high interest rates.