基于AIS轨迹修复的船舶排放空间表征改进方法与应用

基于船舶自动识别系统（Automatic Identification System,AIS）数据表征船舶排放是目前船舶排放空间表征的主流方法,但AIS船舶轨迹点缺失会造成船舶排放量低估和船舶空间分布表征错误,进而影响船舶排放控制区的划分.为改进船舶排放空间表征,本研究以2013年广东省AIS船舶数据为例,采用基于时间和经纬度的三次样条方法对AIS船舶轨迹进行修复,结合动力法计算船舶排放,分析对比AIS轨迹修复前后船舶排放表征的差异,并利用空气质量模型和卫星观测评估AIS轨迹修复对船舶排放表征和广东沿海空气质量模拟的改进效果.结果表明：轨迹修复后广东省海域船舶轨迹点总数由4685773个增至5746664个,船舶NO_x排放量增加了0.6%.对于轨迹点与排放缺失集中的粤东海域,轨迹修复后船舶轨迹点数增加了88%,NO_x排放量在广东省船舶排放量的占比提升至22%,特别是在粤东重点修复海域NO_x排放量增加了2.7倍.原始轨迹在广东省海域较为稀疏,在粤东海域有明显轨迹缺失;轨迹修复后广东省海域船舶轨迹更为密集,粤东海域船舶轨迹得以补充,船舶排放空间分布更连贯.对比模拟结果与卫星观测结果,轨迹修复后粤东重点修复海域船舶模拟浓度与观测浓度的偏差由51%减至6%,总体上船舶排放模拟结果更接近卫星观测结果.     

麦夸里岛毛皮海豹体内小塑料颗粒的来源和生物聚集

本文研究了从麦夸里岛上毛皮海豹(Arctocephalus spp.)粪便中发现的164个塑料颗粒(平均长度为4.1mm).其中41个塑料颗粒的电子显微照片显示,从其形状来看,没有一个可被确定为塑料颗柱原料--通常这样的颗粒是圆柱形和球形的.而海豹粪便中的164个塑料颗粒全都是7种颜色的角形颗粒(原料颗粒通常是透明的或白色的),并可被分为两类①沿晶体线碎裂的和可能是紫外线分解的;②被磨蚀成带有圆角的不规则形状(擦痕明显可见).白色、棕色、绿色、黄色以及蓝色是最常见的颜色.在成分上,它们来自于5种聚合物群聚乙烯93%;聚丙烯4%;多(1-CI-1-聚丁二烯)聚氯丁二烯2%;三聚氰胺-尿素(酚)(甲醛)树脂0.5%以及纤维素(绳纤维)0.5%.较大的群是漂浮的,比重小于海水.这些小塑料是由较大颗粒(碎片)分解而成的.它们看来是被水冲上岸的并在卵石海滩上受到研磨的塑料用品分解而成的.大多数颗粒(70%)肯定是由于经过不断的磨蚀而最后形成今天的形状.据假设,塑料颗粒被冲到海洋中,然后按其大小有选择地被一种中上层鱼--Electrona subaspera--吃掉,而这种鱼后来又被毛皮海豹吃掉.因此,这些塑料颗粒是由这种鱼和海豹在其正常的摄食过程中聚集的.     

二手电器使用算好两笔账

因价格低廉且符合人们印象中的循环经济原理，二手电器市场异军突起，成为电器市场不可或缺的组成部分。然而，由于存在着市场管理的不够规范、市场管理方法过于粗疏以及管理缺位等问题，二手电器市场并不像人们所希望的那样，都能产生循环经济效益。     

一个特大城市:墨西哥城大都市区的水资源管理

引言 墨西哥城大都市区(MCMA)位于被称作"墨西哥谷(Valle deMexico)"的天然围合的盆地里,海拔2240m.它下辖联邦区和墨西哥州的34个自治市.墨西哥城是墨西哥的首都,位于联邦区(DistritoFederal,DF),四面环山,海拔高度超过5000m.墨西哥州是墨西哥人口最稠密的地区(据报道有1300万居民),人口仅次于它的是墨西哥城,大约有860万人[1].     

家电市场优胜劣汰的节能法则

节能对于家电行业来说，应是一种必备性能。在目前的环境、资源、能源三重压力背景下，随着新节能政策和推荐或强制性的标准陆续出台，日益规范化的家电市场随时都有进行大洗牌的可能。     

Scaling and Mapping Regional Calculations of Soil Chemical Weathering Rates in Sweden

Weathering rates of base cations are crucial in critical load calculations and assessments of sustainable forestry. The weathering rate on a single site with detailed geological data can be modelled using the PROFILE model. For environmental assessments on a regional scale, the weathering rates for sites are scaled into regional maps. The step from sites to regional level requires focus on the spatial variation of weathering rates. In this paper, a method is presented by which weathering rates are calculated for 25589 Swedish sites with total elemental analysis for the soil. Based on a part of the results, a methodology for creating area covering maps by geostatistical analysis and kriging is described. A normative reconstruction model was used to transform total elemental analysis to mineralogy. Information from the Swedish Forest Inventory database and other databases were used to derive texture and other important information for the sites, e.g. climate, deposition and vegetation data. The calculated weathering rates show a regional pattern that indicates possibilities for interpolation of data in large parts of Sweden. Geostatistical analysis of an area in southern Sweden shows different properties for different base cations. Kriging was performed for potassium to demonstrate the method. It was concluded that different base cations and different regions have to be analysed separately, in order to optimise the kriging method.     

Effects of fly ash addition on physical properties of porous clay-fly ash composites via polymeric replica technique

The porous composites of clay and fly ash have the potential to be used in many fields, such as catalyst support and gas adsorbents. In this study, various ratios of fly ash (1–2) with different percentage of suspension (50–70 wt%) were applied to produce porous clay-fly ash composites via polymeric replica technique. Fabrication process starts by mixing clay and fly ash in distilled water to form slurry. The process is followed by fully immersing polymer sponge in slurry. The excess slurry is then removed through squeezing. Finally, the sponge coated with slurry is sintered at 500 and 1250 °C for 1 h. It is found that the compressive strength of porous composites improves significantly (0.178–1.28 MPa) when the amount of clay-fly ash suspension mixture (50–70 wt%) increases. The compressive strength of porous composites is mainly attributed to the mullite, quartz and amorphous phase formations. These results are supported by X-ray diffraction analysis. On the other hand, increase in the amount of suspension reduces the apparent density (from 2.44 to 2.32 g/cm³) and porosity (from 97 to 85 %). The reduction in apparent density is believed to be caused by the presence of high fly ash content in porous composites. The melted fly ash cenospheres have closed the internal pores and increased density of samples. Higher suspension level not only reduces porosity, but also increases close pores of the porous composites. The results are justified through the observation from the structures of porous clay-fly ash composites.     

Factors affecting the implementation of green specifications in construction

Green specifications constitute one of the important elements in green construction. New sustainability requirements and changing priorities in construction management have spurred the emerging green specifications to a faster pace of development. A cross-sectional survey has been conducted in Hong Kong in 2007 to identify principal factors leading to the success of preparing green specifications. Based on extensive construction management literature, 20 variables concerning sustainable construction were summarized. Using the Mann–Whitney U-test, the subtle differences between stakeholders in specifying construction work have been detected even with the high consistency of the responses among the groups. Moreover, five independent factors for successful specification of green construction have been categorized by factor analysis. They are related to (1) green technology and techniques, (2) reliability and quality of specification, (3) leadership and responsibility, (4) stakeholder involvement, and (5) guide and benchmarking systems. Whilst the first and fourth factors are generally more important, different stakeholder groups have different emphases. The results of the survey have been validated against established principles.     

Innovations strategy for moving from created regional clusters to co-creation in life sciences for health care and well-being ecosystems

Environmental Science and Pollution Research - Over the last decades, the demographic changes have all altered the population structure and influenced the social, economic, and political...