Mikrobielle Sanierung von 2,4,6-Trinitrotoluol (TNT) kontaminierten Böden

Within the limits of a feasability study abouton-site bioremediation methods for TNT-contaminated soils, composting was chosen as a very promising and cheap method. This method was critically compared with those described in the literature and was primarily rated under ecotoxicological aspects. The investigated location is the former munition plant «Tanne» in the aerea of Clausthal-Zellerfeld in Lower Saxony, Germany. To estimate the autochtonic microflora, we assessed the number of aerobic heterotrophic bacteria and determined their respiration activity in soils. In addition, we isolated bacteria and examined their capacity to metabolize TNTin vitro. Both the amount of autochtonic microrganisms (4.7×10⁸ to 1.2×10¹⁰ colony forming units (cfu)/kg dryweight) as well as their respiration activity did not correlate with the concentrations of nitrotoluenes in the soils. With high contaminated soil (20 g TNT/kg dry weight) we carried out a small compost in the range of 10 liters. During 28 days of composting TNT-concentration decrease over 90% and only minor amounts of monoaminodinitrotoluenes were generated. However, an acidic pretreatment of the compost material at the end of the reaction showed that TNT could be partially resolved under these extreme conditions and that an ecotoxicological risk may still exist. Possible changes in the realization of the composting process in order to make sure that the contaminants are savely bound to the humin matrix are discussed.     

Recycling of petroleum-contaminated sand

The environmental impact of using petroleum-contaminated sand (PCS) as a substitute in asphalt paving mixtures was examined. An appreciable component of PCS is oily sludge, which is found as the dregs in oil storage tanks and is also produced as a result of oil spills on clean sand. The current method for the disposal of oily sludge is land farming. However, this method has not been successful as an oil content of < 1% w/w is required, and difficulty was encountered in reaching this target. The reuse of the sludge in asphalt paving mixtures was therefore considered as an alternative. Standard tests and environmental studies were conducted to establish the integrity of the materials containing the recycled sludge. These included physical and chemical characterization of the sludge itself, and an assessment of the mechanical properties of materials containing 0%, 5%, 22% and 50% oily sludge. The blended mixtures were subjected to special tests, such as Marshall testing and the determination of stability and flow properties. The experimental results indicated that mixtures containing up to 22% oily sludge could meet the necessary criteria for a specific asphalt concrete wearing course or bituminous base course. To maximize the assay from the recycled material, the environmental assessment was restricted to the 50% oily sludge mixture. Leachates associated with this particular mixture were assayed for total organic residue and certain hazardous metal contaminants. The results revealed that the organics were negligible, and the concentrations of the metals were not significant. Thus, no adverse environmental impact should be anticipated from the use of the recycled product. Our research showed that the disposal of oily sludge in asphalt paving mixtures could possibly yield considerable savings per tonne of asphalt concrete, and concurrently minimize any direct impact on the environment.     

Reconstructing forest-cover change in the Swiss Alps between 1880 and 2010 using ensemble modelling

Regional Environmental Change - Understanding drivers of forest-cover change is essential for a broad range of ecosystem properties. In this work, we assessed changes in forest cover using...     

Einsatz eines Sensors zurOnline-Bestimmung der mikrobiellen Aktivität

The activity of microorganisms in the activated sludge can be measured with a bio-activity sensor. The signal of the sensor reacts sensitively to changes in substrate concentrations and the appearance of toxic materials. With the sensor, it is possible to check biological wastewater treatment plants online with regard to their microbial activity and to supervise the flowing sewage with reference to its toxic potential.     

Ökotoxikologische und humantoxikologische Risikobewertung PAK-belasteter Böden vor und nach biologischer Behandlung

The goal of the present work is to assess the adverse effects of soil bound polycyclic aromatic hydrocarbons (PAH) which remain in soils after biological remediation. We focus on risk assessment for mammalian species with respect to the oral uptake of contaminated soil particles and compare the results of a biomarker test with those of an ecotoxicological assay, the bioluminescence inhibition test withVibrio fischeri. As a biomarker effect in mammals, we determined the liver microsomal cytochrome P450 enzyme CYP1A1 which is induced by PAH in exposed rats. After biological soil treatment, different amounts of PAH remain in the soil depending on the soil properties and initial pollutant composition. Particularly, higher condensated PAH resists biological treatment due to its hydrophobicity. In addition, high amounts of organic carbon in the soils affect remediation efficiency. In the bioluminescence inhibition test, eluates of all biologically treated soils studied do not reveal any or only low inhibitory effects. In contrast, the oral uptake of biologically treated contaminated soils leads to induction levels for CYP1A1 similar to those in the untreated samples. A good correlation is obtained between CYP1A1 levels and the amount of 5 and 6-ring PAH in the soil samples. The main result is that the remediation efficiency determined by the luminescence test is not reflected by the biomarker test, a finding which indicates the high bioavailability of residual PAH in soils. Consequently, new criteria for human risk assessment can be delineated.     

Quantifying nitrogen process rates in a constructed wetland using natural abundance stable isotope signatures and stable isotope amendment experiments

This study describes the spatial variability in nitrogen (N) transformation within a constructed wetland (CW) treating domestic effluent. Nitrogen cycling within the CW was driven by settlement and mineralization of particulate organic nitrogen and uptake of NO3-. The concentration of NO3- was found to decrease, as the delta15N-NO3- signature increased, as water flowed through the CW, allowing denitrification rates to be estimated on the basis of the degree of fractionation of delta15N-NO3-. Estimates of denitrification hinged on the determination of a net isotope effect (eta), which was influenced byprocesses that enrich or deplete 15NO3- (e.g., nitrification), as well as the rate constants associated with the different processes involved in denitrification (i.e., diffusion and enzyme activity). The influence of nitrification on eta was quantified; however, it remained unclear how eta varied due to variability in denitrification rate constants. A series of stable isotope amendment experiments was used to further constrain the value of eta and calculate rates of denitrification, and nitrification, within the wetland. The maximum calculated rate of denitrification was 956 +/- 187 micromol N m(-2) h(-1), and the maximum rate of nitrification was 182 +/- 28.9 micromol N m(-2) h(-1). Uptake of NO3- was quantitatively more important than denitrification throughoutthe wetland. Rates of N cycling varied spatially within thewetland, with denitrification dominating in the downstream deoxygenated region of the wetland. Studies that use fractionation of N to derive rate estimates must exercise caution when interpreting the net isotope effect. We suggest a sampling procedure for future natural abundance studies that may help improve the accuracy of N cycling rate estimates.     

A three-layer diffusion-cell to examine bio-enhanced dissolution of chloroethene dense non-aqueous phase liquid

Microbial reductive dechlorination of trichloroethene (TCE) and perchloroethene (PCE) in the vicinity of their dense non-aqueous phase liquid (DNAPL) has been shown to accelerate DNAPL dissolution. A three-layer diffusion-cell was developed to quantify this bio-enhanced dissolution and to measure the conditions near the DNAPL interface. The 12 cm long diffusion-cell setup consists of a 5.5 cm central porous layer (sand), a lower 3.5 cm DNAPL layer and a top 3 cm water layer. The water layer is frequently refreshed to remove chloroethenes at the upper boundary of the porous layer, while the DNAPL layer maintains the saturated chloroethene concentration at the lower boundary. Two abiotic and two biotic diffusion-cells with TCE DNAPL were tested. In the abiotic diffusion-cells, a linear steady state TCE concentration profile between the DNAPL and the water layer developed beyond 21 d. In the biotic diffusion-cells, TCE was completely converted into cis-dichloroethene (cis-DCE) at 2.5 cm distance of the DNAPL. Dechlorination was likely inhibited up to a distance of 1.5 cm from the DNAPL, as in this part the TCE concentration exceeded the culture’s maximum tolerable concentration (2.5 mM). The DNAPL dissolution fluxes were calculated from the TCE concentration gradient, measured at the interface of the DNAPL layer and the porous layer. Biotic fluxes were a factor 2.4 (standard deviation 0.2) larger than abiotic dissolution fluxes. This diffusion-cell setup can be used to study the factors affecting the bio-enhanced dissolution of DNAPL and to assess bioaugmentation, pH buffer addition and donor delivery strategies for source zones.     

Assessing the long-term supply risks for mineral raw materials—a combined evaluation of past and future trends

This paper develops a method for identifying and assessing long-term supply risks for mineral raw materials. The method is based on a combined evaluation of past and future supply and demand trends. By analysing raw material boom and bust cycles over the past 50 years, we have quantified indicators and defined benchmarks for identifying critical market situations. By applying the method, risks for supply shortage may be identified at an early stage. In addition, a numerical evaluation model has been developed for better comparison between various mineral raw materials. Compared to other assessment methods this method uses specific benchmarks for each raw material to better assess supply risks. The method is embedded within a systematic and comprehensive analytical approach.     

Long-term change in drivers of forest cover expansion: an analysis for Switzerland (1850-2000)

Regional Environmental Change - The spatial distribution of forests in Europe represents the legacy of centuries of human land use decisions. Due to the limited availability of historical data,...