Discrete event simulation to aid decision-making and mitigation in solid waste management

This article aims to evaluate municipal solid waste (MSW) management schemes in order to promote sustainability and eco-efficiency, core elements in global mitigation strategies in both public and private policies. A discrete event simulation (DES) approach was used to integrate the economic, environmental, and social aspects related to aseptic carton packages (ACP) in Itajuba, Brazil. The simulated scenarios consider three alternatives for disposing ACP: landfills, recycling, and incineration with energy recovery. According to our findings, incineration alternatives are preferred from an eco-efficiency perspective, given the potential greenhouse gas (GHG) emissions reductions and due to the possibility of energy recover, which reinforces the contribution of this technology to promote sustainability as largely found in the international literature. Given the context of MSW management in Brazil, this represents a significant opportunity to increase the effectiveness of mitigation strategies adopted in the country. Taking into account that this is by far the least applied technology, the authors strongly advocate that global strategies for mitigation consider different approaches to integrate carbon dioxide (CO₂) emission reductions related to the entire MSW management system and its alternatives, thus advancing from a waste disposal-oriented system to a life cycle–oriented system.

     

Higher Plants As Bioindicators Of Sulphur Dioxide Emissions In Urban Environments

The evaluation of certain vascular plants that grow in the city of Madrid as biomonitors of SO₂ air pollution in urban environments has been carried out. Total concentration of sulphur in leaves of the chosen higher plants as well as other parameters in close relation to this contaminant (visible injury symptoms, chlorophyll a- and b-content and peroxidase activity) have been determined in order to study the spatial distribution and temporal changes in SO₂ deposition. Results obtained show that coniferous species such as Pinus pinea, were more sensitive to SO₂ atmospheric concentration than leafy species as Quercux ilex subspecies ballota and, in the same way, bush species, such asPyracantha coccinea and Nerium oleander, were more sensitive than wooded species, such as Cedrus deodaraandPinus pinea, respectively. There is a higher accumulation of sulphur in vegetable species located near highways and dense traffic incidence roads and near areas with high density of population. The minimum values for accumulation of SO₂ were registered in winter and spring seasons (from January to April) due to the vegetative stop; while maximum values are obtained during the summer season (from June to September), due to the stoma opening. The highest increments in sulphur concentration, calculated as the difference between two consecutive months, are obtained in May and June for all considered species except forCedrus deodara and Pyracantha coccinea, both species have few seasonal changes during the whole year. Some species are more sensitive to natural washing than others, showing a decrease in sulphur concentration after rainfall periods.     

Evaluation of inorganic pyrophosphate in amniotic fluid as a mode of prenatal diagnosis of osteogenesis imperfecta

Using a modified procedure by Solomons and Styner (1969), an evaluation of inorganic pyrophosphate (PPi) was performed on the amniotic fluid of two fetuses at risk for osteogenesis imperfecta (OI) at 14½ weeks gestation. The parents of both cases had a previous child with OI, Type II. The normal control group at 14–16 weeks gestation had PPi values ranging from 22.0–59.2 ug/100 ml, with a mean of 38.6±9.51 ug/100 ml. In each at-risk fetus, the amniotic fluid PPi value was within normal range. The first baby was born phenotypically normal at term. Intrauterine radiographic and fetal sonograms were done on the second fetus at approximately 19 weeks gestation. Both showed evidence of OI, Type II. The pregnancy was terminated at 21 weeks. Radiologic studies of the aborted fetus were consistent with OI, Type II. Our results indicate that the evaluation of PPi levels in amniotic fluid is not the method of choice for prenatal diagnosis of IO.     

Assessing the Influence of Social Responsibility on Reputation: An Empirical Case-Study in Agricultural Cooperatives in Spain

The attention to ethics has gradually become a concurrent topic of modern companies’ management. In the last years Social Responsibility has become a key issue in the strategic agenda of competitive agriculture cooperatives. However, reputation management has not been a visible strength in the cooperative enterprises. First of all, this work theoretically analyzes the relationship between Social Responsibility and reputation in cooperatives. Later, from a practical point of view, we carry on an empirical analysis focused on the olive oil cooperatives in the south of Spain, in the province of Jaén. With respect to the previous studies on the topic, this work reveals a main reason of interest reinforcing the role of research in addressing real problems of cooperatives. The article points out the characteristics of this kind of agribusiness and shows the importance of the adoption of a responsible orientation in fostering reputation for creating sustainable competitive advantages.     

Use of microbial activity measurements for monitoring RBC biofilms

Fixed biomass technologies, such as rotating biological contactors or biodiscs, have been applied for wastewater depuration both in large and medium–small-sized agglomerations. Biofilm’s composition and microorganism activity are essential parameters for the successful operation and control of these systems. Biofilm’s thickness and total dry weight have been widely used for biofilm’s characterization but, actually, are not sufficient to describe biofilm activity. In fact, biofilm’s activity is not proportional to the quantity of fixed biomass, but increases with the thickness of biofilm up to a determined level called the “active thickness”. Above this level, the diffusion of nutrients through the film becomes a limiting factor. A stable, thin, and active biofilm thus offers numerous advantages in water and wastewater treatment. Different parameters have been used to evaluate biofilm’s activity. The specific oxygen uptake rate, INT-dehydrogenase activity, and the ratio active/total cells have been applied for that purpose. These methods are not only simple and rapid but also sensitive, precise, and representative. The results obtained confirm the potential of the microbial activity measurements studied for an accurate biofilm’s characterization and biomass activity estimation in fundamental research and for the practical operation and control of fixed biomass depuration systems.     

Evaluation of concentration efficiency of the Pseudomonas aeruginosa phage PP7 in various water matrixes by different methods

Enteric viruses monitoring in surface waters requires the concentration of viruses before detection assays. The aim of this study was to evaluate different methods in terms of recovery efficiencies of bacteriophage PP7 of Pseudomonas aeruginosa, measured by real-time PCR, using it as a viral control process in water analysis. Different nucleic acid extraction methods (silica–guanidinium thiocyanate, a commercial kit (Qiagen Viral RNA Kit) and phenol–chloroform with alcohol precipitation) exhibited very low recovery efficiencies (0.08–4.18 %), being the most efficient the commercial kit used for subsequent experiments. To evaluate the efficiency of three concentration methods, PBS (as model for clean water) and water samples from rivers were seeded to reach high (HC, 10⁶ pfu ml^?1) and low concentrations (LC, 10⁴ pfu ml^?1) of PP7. Tangential ultrafiltration proved to be more efficient (50.36?±?12.91, 17.21?±?9.22 and 12.58?±?2.35 % for HC in PBS and two river samples, respectively) than adsorption–elution with negatively charged membranes (1.00?±?1.34, 2.79?±?2.62 and 0.05?±?0.08 % for HC in PBS and two river samples, respectively) and polyethylene glycol precipitation (15.95?±?7.43, 4.01?±?1.12 and 3.91?±?0.54 %, for HC in PBS and two river samples, respectively), being 3.2–50.4 times more efficient than the others for PBS and 2.7–252 times for river samples. Efficiencies also depended on the initial virus concentration and aqueous matrixes composition. In consequence, the incorporation of an internal standard like PP7 along the process is useful as a control of the water concentration procedure, the nucleic acid extraction, the presence of inhibitors and the variability of the recovery among replicas, and for the calculation of the sample limit of detection. Thus, the use of a process control, as presented here, is crucial for the accurate quantification of viral contamination.     

Environmental Impact Assessment of Polylactide(PLA)/Chicken Feathers Biocomposite Materials

The aim of this study is to analyse the environmental impacts (EIs) of the process of preparation of new biocomposite materials obtained from polylactide (PLA) and chicken feathers (CFs). Two CFs stabilization methods and different percentages of CFs have been studied. The EIs of these new composites were compared to the impact of virgin PLA. Cradle-to-gate life cycle inventories were assessed for 0–35% v/v of CFs in a CFs/PLA biocomposite. Two CFs stabilization processes, autoclave and surfactant, were tested and compared with the aim to prioritize one of them from the environmental point of view. A composite plate of 184?×?184?×?2.2 mm³ was defined as the functional unit. Autoclave stabilization process exhibited lower environmental impact compared with surfactant stabilization process mainly due to both the lower requirements of electricity and water and the reduced pollution loads of the generated wastewater. Thus, the autoclave process was selected as the standard method when comparing the EIs of the proposed CFs/PLA biocomposites. In this sense, the addition of CFs to PLA matrix proportionally reduces all the EIs compared to pure PLA due to the replacement of PLA with CFs. This behaviour can be explained because the PLA production accounts for the 99% of the impact of the biocomposite. Consequently, CFs conveniently stabilized might be an alternative raw material to prepare CFs/PLA biocomposites with less environmental impact compared to pure PLA.     

Phylogenetics of American scallops (Bivalvia: Pectinidae) based on partial 16S and 12S ribosomal RNA gene sequences

Pectinids constitute one of the most conspicuous groups of marine bivalves, and include some of the most important species from the point of view of fisheries and aquaculture. In spite of this, their systematics and evolution are not well understood. Only two molecular phylogenetic analyses based on relatively wide taxonomic samplings have been published. These studies largely neglected American species, some of which are central for testing current models of pectinid evolution and diversification, or are commercially valuable. We have sequenced 820 nucleotide base pairs of the 12S and 16S ribosomal RNA genes in nine species of pectinids belonging to six genera living along American coasts. Sequences from homologous regions of 19 other species were gathered from public databases. We constructed phylogenetic maximum-parsimony and maximum-likelihood trees of this set of 28 taxa. Our phylogenetic analysis indicates that Crassadoma is polyphyletic, and cementation to the substrate as a life habit could have appeared independently in two geographic chlamydinid lineages. Nodipecten is placed in the subfamily Pectininae, and the suspected close relationship of Amusium, Euvola and Pecten within this subfamily is also supported. Zygochlamys patagonica appears in the Chlamydinae subfamily, as expected. The existence of a separate subfamily Palliolinae is suggested but not supported statistically. The position of Argopecten, Aequipecten and Flexopecten within the subfamily Pectinidae, suggested by a recent study, could not be confirmed, and we argue that it could be due to a combination of long branch attraction and incomplete sequencing.     

Allozyme variation in European populations of the oyster Ostrea edulis

Variations at 22 enzyme coding loci were surveyed in 11 populations of the oyster Ostrea edulis L., which were sampled between 1988 and 1990 along the Atlantic and Mediterranean coasts of Europe. Atlantic oyster beds suffered a steady decline during the last century, and restocking of beds with oysters of foreign origin has probably resulted in a high degree of interbreeding of natural oyster stocks from all Atlantic Europe. Our study confirms the low levels of genetic variability previously reported for the oyster populations from the Atlantic coasts, and extends it to the Mediterranean coasts. The locus arginine-kinase (ARK ^*) exhibited a high degree of interpopulation differentiation (F _ST=0.289), resulting from extensive variation in gene frequencies along a geographical cline. However, the overall genetic differentiation between populations was slight, and similar to that reported for other local populations of bivalves (mean genetic distance between populations is 0.010, mean F _ST=0.062). A general pattern of increasing differentiation along the coastline in an Atlantic-mediterranean direction emerged; but genetic differentiation among the Atlantic populations was not significantly lower than that observed among the Mediterranean populations. This and other results suggest that the effects of extensive transplantation of oysters among various areas in Europe are detectable only in some particular localities. The geographical distribution of low-frequency alleles suggests a restriction to gene flow outwards from the Mediterranean Sea, across the Straits of Gibraltar.     

Geographical patterns of variability at allozyme loci in the European oyster Ostrea edulis

The variability of 14 enzyme-coding genes has been analysed in samples from 19 populations of the oyster Ostrea edulis L., collected along the Atlantic and Mediterranean coasts of Europe. We found an abundance of clines, which appeared at 8 loci, including the most polymorphic (AP-2 ^*, ARK ^*, EST-4 ^*, MDH-2 ^*, ME-1 ^*, 6PGH ^*, PGI ^* and PGM ^*). Another 6 loci (ALDH ^*, EST-3 ^*, EST-5 ^*, IDH-2 ^*, MDH-1 ^*, ME-2 ^*) exhibited V-shaped patterns of gene-frequency variation, with clines at one or both sides of the Straits of Gibraltar. The observation of coincident clines at many loci can be explained by a model of secondary intergradation. The geographical location of the midpoints of the clines and V-shaped patterns suggests the existence of two ancient Atlantic and Mediterranean oyster stocks which became differentiated in allopatry and subsequently merged. Clines observed along Atlantic and/or Mediterranean coasts at the loci with V-shaped patterns must have arisen independently. The large heterogeneity observed in the levels of gene differentiation (G _ST ) across loci (G _ST ranged from 0.008 to 0.290) and important differences in estimates of gene flow obtained by different methods suggest that the populations of O. edulis are not in genetic equilibrium. Lack of population equilibrium can be due to natural selection and/or restrictions to gene flow. The average among-population variability was higher than in other oyster species that do not show incubatory habits, and represented 8.8% of the total heterozygosity. Levels of intrapopulation variability were lowest in populations from the North Atlantic, suggesting low population sizes in that area.