Phthalide als Hauptbestandteile des ätherischen Öls der Früchte vonMeum athamanticum Jacq.

The Science of Nature -     

Ein neues Emanometer für Präzisionsmessungen mit vielseitiger Verwendungsmöglichkeit

The Science of Nature -     

On vortex loops and filaments: three examples of numerical predictions of flows containing vortices

Vortex motion plays a dominant role in many flow problems. This article aims at demonstrating some of the characteristic features of vortices with the aid of numerical solutions of the governing equations of fluid mechanics, the Navier-Stokes equations. Their discretized forms will first be reviewed briefly. Thereafter three problems of fluid flow involving vortex loops and filaments are discussed. In the first, the time-dependent motion and the mutual interaction of two colliding vortex rings are discussed, predicted in good agreement with experimental observations. The second example shows how vortex rings are generated, move, and interact with each other during the suction stroke in the cylinder of an automotive engine. The numerical results, validated with experimental data, suggest that vortex rings can be used to influence the spreading of the fuel droplets prior to ignition and reduce the fuel consumption. In the third example, it is shown that vortices can also occur in aerodynamic flows over delta wings at angle of attack as well as pipe flows: of particular interest for technical applications of these flows is the situation in which the vortex cores are destroyed, usually referred to as vortex breakdown or bursting. Although reliable breakdown criteria could not be established as yet, the numerical predictions obtained so far are found to agree well with the few experimental data available in the recent literature.     

Contaminants in fish tissue from US lakes and reservoirs: a national probabilistic study

An unequal probability design was used to develop national estimates for 268 persistent, bioaccumulative, and toxic chemicals in fish tissue from lakes and reservoirs of the conterminous United States (excluding the Laurentian Great Lakes and Great Salt Lake). Predator (fillet) and bottom-dweller (whole body) composites were collected from 500 lakes selected randomly from the target population of 147,343 lakes in the lower 48 states. Each of these composite types comprised nationally representative samples whose results were extrapolated to the sampled population of an estimated 76,559 lakes for predators and 46,190 lakes for bottom dwellers. Mercury and PCBs were detected in all fish samples. Dioxins and furans were detected in 81% and 99% of predator and bottom-dweller samples, respectively. Cumulative frequency distributions showed that mercury concentrations exceeded the EPA 300 ppb mercury fish tissue criterion at nearly half of the lakes in the sampled population. Total PCB concentrations exceeded a 12 ppb human health risk-based consumption limit at nearly 17% of lakes, and dioxins and furans exceeded a 0.15 ppt (toxic equivalent or TEQ) risk-based threshold at nearly 8% of lakes in the sampled population. In contrast, 43 target chemicals were not detected in any samples. No detections were reported for nine organophosphate pesticides, one PCB congener, 16 polycyclic aromatic hydrocarbons, or 17 other semivolatile organic chemicals.     

Migration of aluminum from food contact materials to food—a health risk for consumers? Part III of III: migration of aluminum to food from camping dishes and utensils made of aluminum

Background

When cooking on a barbecue grill, consumers often use aluminum grill pans. For one, the pan catches the fats and oils that would drip into the embers causing the formation of potentially noxious smoke, and the pan also protects the food from being burned by direct heat from the coals. In addition, new aluminum products for use in ovens and grills are becoming increasingly popular. Due to their light weight and excellent heat transfer camping, utensils made of aluminum are, for example, often used by fishermen and mountain climbers. Preparing food in aluminum utensils can, however, result in migration of the aluminum to the foodstuffs.

Results/Conclusions

In this study presented here, it was found that the transfer limit of 5.00 mg/L for aluminum is not exceeded using simulants for oil or for tap water; however, with an aqueous solution of 0.5% citric acid, the limit is clearly exceeded at 638 mg/L. This means that the Tolerable Weekly Intake (TWI) is exceeded by 298% for a child weighing 15 kg and for an adult weighing 70 kg it is equivalent to 63.8% of the TWI, assuming a daily uptake of 10 mL marinade containing lemon juice over a period of 1 week. Preparation of a fish dish with a marinade containing lemon juice in camping dishes would result in the TWI being exceeded by 871% for a child weighing 15 kg and by 187% for an adult weighing 70 kg assuming a daily uptake of 250 g over a period of 1 week.

     

Highly active photocatalytic coatings prepared by a low-temperature method

Photocatalytic properties of titanium (IV) oxide (TiO₂) in anatase form can be used for various purposes, including photocatalytic purification of water. For such an application, suspended or fixed photocatalytic reactors are used. Those with fixed phase seem to be preferred due to some advantages, one of which is the avoidance of photocatalyst filtration. To avoid leaching and exfoliation of the fixed phase, an immobilization procedure leading to a good adhesion of a catalyst to a substrate is crucial. Within this work, we present physical and photocatalytic characterization results of five commercially available TiO₂ photocatalysts (P25, P90, PC500, KRONOClean 7000, VPC-10) and one pigment (Hombitan LO-CR-S-M), which were successfully immobilized on glass slides by a “sol suspension” procedure. Different mechanical tests and characterization methods were used to evaluate the stability and morphology of the layers. Evaluation of photocatalytic activity was done by tests under UVA and UV–vis irradiation, using a method based on the detection of the fluorescent oxidation product of terephthalic acid (TPA), i.e., hydroxyterephthalic acid (HTPA). Aeroxide® P90 incorporated into the silica-titania binder was the most photocatalytically active layer and, unlike the others, showed significant increase of photocatalytic activity through the entire range of tested UVA irradiation intensities (2.3 mW/cm²–6.1 mW/cm²). The high mechanical stability of some photocatalytic layers allows using them in water photocatalytic purification reactions.