Deployment of parabolic trough concentrated solar power plants in North Africa – a case study for Libya

The study addresses the potential of using concentrated solar power plants (CSPs) as a sustainable alternative of clean energy generation in the Mediterranean region and, in particular, in its North Africa shore. This location presents attractive conditions for the installation of CSPs, in particular high solar irradiation, good manpower concentration, and proximity and availability of water resources for condenser cooling. Energetic, exergetic, and economic analyses were conducted taking into consideration a particular type of CSPs - the parabolic trough concentrated solar power plant, which incorporates the most proven technology and it is already used in Southern Europe (Spain). In addition, the study considered the impact of project financing and incentives on the cost of energy. The combination of higher values for performance and potentially lower levelized cost of electricity (LCE) for the North Africa Mediterranean Rim than the South of Spain region can yield a very favorable return for the invested capital. Tripoli compared to Almeria presented superior performance and potentially lower LCE values ($0.18/kWh versus $0.22/kWh). This is significant, even when it is taken into consideration the fact that the plant in Tripoli, despite a relatively modest capacity factor of 34%, has a large gross power output of 173,886 MWhe. In addition, the implementation at the Tripoli location of a plant similar to the Anadsol plant has a slight advantage (2–3%) in terms of overall efficiency.     

Review: recent advances in biogas purifying technologies

Biomethane production through biogas upgrading is a promising renewable energy for some industries which could be part of the equilibrium needed with fossil fuels consumption to achieve a sustainable society. This paper presents a comprehensive list of biogas upgrading technologies focused on carbon dioxide removal as well as recent advances reported by researcher with wide expertise in this topic. Additionally, an extensive costs–performance comparison among the technologies studied is discussed. Among the different alternatives, chemical scrubbing stood out to achieve high biomethane purities while cryogenic technologies proved to be effective against methane losses. Regarding the different costs, water scrubbing and membrane separation seem to be the most affordable techniques.     

Finished leather waste chromium acid extraction and anaerobic biodegradation of the products

Due to the amounts of chromium in the leachate resulting from leather leaching tests, chromium sulfate tanned leather wastes are very often considered hazardous wastes. To overcome this problem, one option could be recovering the chromium and, consequently, lowering its content in the leather scrap. With this objective, chromium leather scrap was leached with sulfuric acid solutions at low temperature also aiming at maximizing chromium removal with minimum attack of the leather matrix. The effects of leather scrap dimension, sulfuric acid and sodium sulfate concentration in the solutions, as well as extraction time and temperature on chromium recovery were studied, and, additionally, organic matrix degradation was evaluated. The best conditions found for chromium recovery were leather scrap conditioning using 25 mL of concentrated H₂SO₄/L solution at 293 or 313 K during 3 or 6 days. Under such conditions, 30–60 ± 5% of chromium was recovered and as low as 3–6 ± 1% of the leather total organic carbon (TOC) was dissolved. Using such treatment, the leather scrap area and volume are reduced and the residue is a more brittle material showing enhanced anaerobic biodegradability. Although good recovery results were achieved, due to the fact that the amount of chromium in eluate exceeded the threshold value this waste was still hazardous. Thus, it needs to be methodically washed in order to remove all the chromium de-linked from collagen.     

Study of new reinforcing materials for cementitious panel production

Environmental Science and Pollution Research - The development of building materials using new types of raw materials is currently on demand by society and the industry. It is intended to reduce...     

Treatment of a clinical analysis laboratory wastewater from a hospital by photo-Fenton process at four radiation settings and toxicity response

Environmental Science and Pollution Research - The photo-Fenton process was performed with four radiation settings to treat clinical analysis laboratory wastewater (CALWW) from a hospital, with the...     

Climate change implications for the nest site selection process and subsequent hatching success of a green turtle population

Sandy beach habitat where sea turtles nest will be affected by multiple climate change impacts. Before these impacts occur, knowledge of how nest site selection and hatching success vary with beach microhabitats is needed to inform managers on how to protect suitable habitats and prepare for scientifically valid mitigation measures at beaches around the world. At a highly successful green turtle (Chelonia mydas) rookery at Akumal, Quintana Roo, Mexico, we measured microhabitat characteristics along the beach crawl (rejected sites) and related nest site conditions (selected sites) to subsequent hatching success rates for 64 nesting events. To our knowledge, this is the first study to report environmental data along the nesting crawl for a green turtle population and the first to use natural breaks in the data to describe their preferred habitat ranges. Our results indicate that turtles were likely using a combination of cues to find nest sites, mainly higher elevations and lower sand surface temperatures (Kruskal-Wallis test, H?=?19.84, p?<?0.001; H?=?10.78, p?<?0.001). Hatching success was significantly and negatively correlated to sand temperature at cloaca depth (Spearman’s ρ?=??0.27, p?=?0.04). Indeed, the preferred range for cloaca sand temperatures at the nest site (26.3–27.5 °C) had significantly higher hatching success rates compared to the highest temperature range (Tukey HSD?=?0.47, p?=?0.05). Sand temperatures at various depths were intercorrelated, and surface and cloaca depth sand temperatures were correlated to air temperature (ρ?=?0.70, p?=?0.00; ρ?=?0.26, p?=?0.04). Therefore, rising air temperatures could alter sand temperature cues for suitable nest sites, preferred nest site ranges, and produce uneven sex ratios or lethal incubating temperatures. Elevation cues and preferred ranges (1.4–2.5 m) may also be affected by sea level rise, risking inundation of nests.     

Presence of Torque Teno Virus (TTV) in Tap Water in Public Schools from Southern Brazil

Torque teno virus (TTV) was surveyed in tap water collected in schools from three municipalities located in the south of Brazil. TTV genomes were found in 11.7 % (4/34) of the samples. TTV DNA was detected in 10.5 % (2/19) of the samples collected at the city of Caxias do Sul and in 25 % (2/8) of the samples from Pelotas. Those cities have a low rate of sewage treatment. All samples from Santa Cruz do Sul, which has nearly 92 % of its sewage treated, were negative. These results suggest that the amount of sewage treated may have an effect on the detection rates of TTV DNA in drinking water in a given urban area, showing a mild negative correlation (r = ?0.76), when comparing the percentage of sewage treatment to the detection of TTV genomes. The detection rate of TTV was also compared with Escherichia coli, showing a strong correlation (r = 0.97), indicating that TTV may be a suitable marker of fecal contamination.     

The mystery of a missing bone: revealing the orbitosphenoid in basal Epicynodontia (Cynodontia,Therapsida) through computed tomography

The basal non-mammaliaform cynodonts from the late Permian (Lopingian) and Early Triassic are a major source of information for the understanding of the evolutionary origin of mammals. Detailed knowledge of their anatomy is critical for understanding the phylogenetic transition toward mammalness and the paleobiological reconstruction of mammalian precursors. Using micro-computed tomography (μCT), we describe the internal morphology of the interorbital region that includes the rarely fossilized orbitosphenoid elements in four basal cynodonts. These paired bones, which are positioned relatively dorsally in the skull, contribute to the wall of the anterior part of the braincase and form the floor for the olfactory lobes. Unlike procynosuchids and the more basal therapsids in which the orbitosphenoids are well developed, dense, and bear a ventral keel, the basal epicynodonts Cynosaurus, Galesaurus, and Thrinaxodon display cancellous, reduced, and loosely articulated orbitosphenoids, a condition shared with many eucynodonts. The hemi-cylindrical orbitosphenoid from which the mammalian condition is derived re-evolved convergently in traversodontid and some probainognathian cynodonts.