Genetic, morphological, and chemical divergence in the sponge genus Latrunculia (Porifera: Demospongiae) from New Zealand

We undertook a comprehensive study of Latrunculia in New Zealand to determine the relationship between taxonomic, environmental, and chemical variation within the genus. Sponges were collected from five locations around New Zealand: Three Kings Islands, Tutukaka, Wellington, Kaikoura, and Doubtful Sound. Allozyme electrophoresis at nine polymorphic loci indicated that sponges from each geographic location were genetically distinct, and that they displayed genetic differences of the magnitude usually associated with reproductively isolated species (Nei's D between locations =0.375-2.476). Additionally, the comparisons revealed that the green and brown colour morphs of Latrunculia that are sympatric at Three Kings Islands and Kaikoura are distinct from each other, and that there are two genetic groups within the green sponges in Doubtful Sound. On the basis of genetic data we conclude that there are at least eight species of Latrunculia in New Zealand waters, not one to four as had been previously thought. Morphological comparisons of the eight genetic species based on skeletal characters (i.e. skeletal organisation of the choanosome, spicule composition, size, and geometry) indicated that the eight Latrunculia species fell into only two morphological groups that could be easily diagnosed on the basis of discorhabd type. Within these two primary morphological groups, skeletal characteristics among the eight species largely overlap and are not diagnostic. These findings emphasise the limitations of traditional taxonomic methods based solely on skeletal characters for distinguishing species of Latrunculia. However, multivariate analysis (MANOVA and CDA) based on six measured skeletal variables did reveal significant morphological variation among the species (Pillai's Trace=3.28, F=6.90, P<0.0001), supporting the division of the genus into eight species. Comparisons of chemical extracts from Latrunculia also showed that the amounts of five different bioactive compounds (discorhabdins A, B, C, D, and J) varied predictably among the eight species. This finding suggests that discorhabdin variation within Latrunculia, previously thought to be associated with intra-specific environmental variability, is more likely to reflect differences among species rather than phenotypic plasticity. Our results also highlight the importance of thorough taxonomic studies associated with marine natural products research to understand fully the variation in bioactive properties among individuals. The potential processes underlying the unusually high speciation rates in New Zealand Latrunculia that are indicated in our study are discussed.     

In vitro and in vivo study of neutrophil functions after acute methanol intoxication in albino rats

Toxicity from methanol (MeOH), a potentially significant problem due to occupational, accidental, or intentional, as well as daily ingestion of small amounts of the agent, only receives considerable attention after severe signs of intoxication have set in or death is imminent. While accidental and intentional exposures usually involve very high doses, the occupational and ingestion forms more often reflect small daily intakes. Still, even at the low levels, little is known about the potential immunotoxic implications (and less so in regard to mechanisms) from these ongoing exposures. This study has been attempted to focus the effects of acute methanol exposure on blood neutrophil functions in both in vitro and in vivo conditions at 30 and 60?min time intervals. Innate immunity of the host defense relies mostly on neutrophils. The blood MeOH levels were determined upon exposing the experimental animals to ¼ of LD₅₀ MeOH. No significant change in the blood methanol level was observed at 30 and 60?min of methanol exposure. The in vitro results showed a decrease in the neutrophil functions of adherence and phagocytic index without affecting the avidity index, followed by an increased nitroblue tetrazolium (NBT) reduction. The in vivo exposures of MeOH showed a decline in neutrophil adherence. However, the other neutrophil functions were found to be significantly increased, which indicates that in vivo results are different from that of the in vitro studies. The present study concludes that MeOH exposure can reconstitute the innate immune status by altering the neutrophil functions. Moreover, the in vivo effects are much pronounced compared to the in vitro effects, which may be due to the formation of the metabolites under in vivo conditions.     

The potential impacts of sea level rise along the coastal zone of Kanyakumari District in Tamilnadu,India

Climate change associated with sea level rise (SLR) is one of the major environmental concerns of today. This paper presents an assessment of the impacts of sea level rise on the coastal zone of Kanyakumari District in Tamilnadu, India. Digital Elevation Model (DEM) combined with overlay techniques in GIS are used in determining the inundation zones along the coastal region. The analysis evaluated the impact on coastal fishing villages, landuse, tourist spots and sensitive areas under threat. The vulnerability of the coastal areas in Kanyakumari to inundation was quantified, based on the projected sea level rise scenarios of 0.5 and 1 m. Our findings reveal that approximately 13 km² of the land area of Kanyakumari would be permanently inundated due to SLR. This would result in loss of land, alteration of the coastal zone and affects coastal ecosystem. From the study, the mitigation measures (engineering measures) and Coastal Zone Management practices that can be taken to protect human life and property from sea level rise are suggested.     

Correction to: Effect of feed slurry dilution and total solids on specific biogas production by anaerobic digestion in batch and semi-batch reactors

Journal of Material Cycles and Waste Management -     

Graphical strategies for design of evaporation crystallization networks for environmental wastewater applications

This paper introduces graphical strategies for the design of an evaporation/crystallization network for ternary wastewater environmental applications. Sources, sinks and other streams are located on a ternary composition diagram. While a source is any wastewater stream that has the potential to be recycled, a sink is any unit in the process that can accept sources. The proposed methodology is extremely simple to understand and implement, as it only requires basic solid-liquid phase equilibria data and uses lever arm principles to generate alternative process designs. Geometric constructions are carried out on the ternary composition diagram and the respective lever arms are used to determine intermediate flow rates in the evaporation/crystallization network. The relative locations and flow rates of the sources and sinks under consideration, as well as the unique shape of the solid-liquid equilibrium, drive the design of the separation (via evaporation/crystallization) network. Some generic structures are proposed for a typical evaporation and crystallization network. Once the general problem statement has been defined, special cases consisting of a single source-single sink, single source-two sinks and two sources-single sink are described. These special cases are representative of commonly occurring industrial wastewater design problems. Several graphical insights are listed that allow one to represent evaporation and crystallization operations on a ternary triangular composition diagram and avoid mathematical complexity. The possibility of bypassing a part of the initial feed streams is also considered. Certain feasible composition regions are identified on the ternary composition diagram for cases dealing with multiple sources and sinks. The methodology is useful in pre-screening and eliminating certain sources/sinks and is readily applicable to cases with lower number of sources and sinks. A case study involving the ammonium nitrate manufacturing process is included to demonstrate the broad applicability and value of the proposed approach.     

Effect of feed slurry dilution and total solids on specific biogas production by anaerobic digestion in batch and semi-batch reactors

Journal of Material Cycles and Waste Management - Biomass from various sources such as cow dung is a significant source of&nbsp;renewable energy (as biogas) in many regions globally, especially...     

Spatio-temporal classification and prediction of land use and land cover change for the Vembanad Lake system,Kerala: a machine learning approach

Environmental Science and Pollution Research - Land use and land cover (LULC) change has become a critical issue for decision planners and conservationists due to inappropriate growth and its...     

Impact of sequential hybrid pretreatment in anaerobic digestion of food waste and garden waste co-digestion on waste characteristics and biogas production

Journal of Material Cycles and Waste Management - One-third of food produced results as food waste, with no organized and sustainable disposal, and ends up in landfills. Garden waste is yet another...     

Effect of temperature and humidity on formaldehyde emissions in temporary housing units

The effect of temperature and humidity on formaldehyde emissions from samples collected from temporary housing units (THUs) was studied. The THUs were supplied by the U.S. Federal Emergency Management Administration (FEMA) to families that lost their homes in Louisiana and Mississippi during the Hurricane Katrina and Rita disasters. On the basis of a previous study, four of the composite wood surface materials that dominated contributions to indoor formaldehyde were selected to analyze the effects of temperature and humidity on the emission factors. Humidity equilibration experiments were carried out on two of the samples to determine how long the samples take to equilibrate with the surrounding environmental conditions. Small chamber experiments were then conducted to measure emission factors for the four surface materials at various temperature and humidity conditions. The samples were analyzed for formaldehyde via high-performance liquid chromatography. The experiments showed that increases in temperature or humidity contributed to an increase in emission factors. A linear regression model was built using the natural log of the percent relative humidity (RH) and inverse of temperature (in K) as independent variables and the natural log of emission factors as the dependent variable. The coefficients for the inverse of temperature and log RH with log emission factor were found to be statistically significant for all of the samples at the 95% confidence level. This study should assist in retrospectively estimating indoor formaldehyde exposure of occupants of THUs.     

Development of a scalable model for predicting arsenic transport coupled with oxidation and adsorption reactions

Understanding the fundamentals of arsenic adsorption and oxidation reactions is critical for predicting its transport dynamics in groundwater systems. We completed batch experiments to study the interactions of arsenic with a common MnO2(s) mineral, pyrolusite. The reaction kinetics and adsorption isotherm developed from the batch experiments were integrated into a scalable reactive transport model to facilitate column-scale transport predictions. We then completed a set of column experiments to test the predictive capability of the reactive transport model. Our batch results indicated that the commonly used pseudo-first order kinetics for As(III) oxidation reaction neglects the scaling effects with respect to the MnO2(s) concentration. A second order kinetic equation that explicitly includes MnO2(s) concentration dependence is a more appropriate kinetic model to describe arsenic oxidation by MnO2(s) minerals. The arsenic adsorption reaction follows the Langmuir isotherm with the adsorption capacity of 0.053micromol of As(V)/g of MnO2(s) at the tested conditions. The knowledge gained from the batch experiments was used to develop a conceptual model for describing arsenic reactive transport at a column scale. The proposed conceptual model was integrated within a reactive transport code that accurately predicted the breakthrough profiles observed in multiple column experiments. The kinetic and adsorption process details obtained from the batch experiments were valuable data for scaling to predict the column-scale reactive transport of arsenic in MnO2(s)-containing sand columns.