Utilization of Triacetylcellulose Waste for the Production of Carbonaceous Adsorbents

Triacetylcellulose(TAC)-based globular activated carbons having the adsorption capacity comparable with commercial ones have been derived using a carbonization system developed for this purpose. The carbonization of TAC proceeds through a liquid phase causing bubbling due to the emission of the decomposition gases. The phosphorus compounds resulting from the starting material of TAC waste promote the activation reactions to produce micro-pores.     

Air pollution and young children's inhalation exposure to organophosphorus pesticide in an agricultural community in Japan

Assessment of airborne organophosphorus pesticides in houses of young children (1-6 years old) and childcare facilities was conducted following pesticide applications in an agricultural community in Japan. Trichlorfon and fenitrothion, applied in two separate periods, were frequently detected from outdoor and indoor air. Dichlorvos, the primary degradation product of trichlorfon, was also detected after the application of trichlorfon. Both the outdoors and indoor concentration of applied pesticide were shown to increase with decreasing distance from the pesticide-applied farm. Indoor concentration of these pesticides significantly correlated with outdoor concentration (p=0.001 for trichlorfon and p=0.001 for fenitrothion), indicating infiltration of applied pesticide inside. Ratio of indoor to outdoor concentration (I/O ratio) of fenitrothion was higher for houses with windows open during the application than those with closed windows (median value: 0.74 vs. 0.16, p=0.003). However, a similar trend was not observed for trichlorfon as well as dichlorvos in the first period. Dichlorvos was found to have a higher I/O ratio than trichlorfon during the period, and clear correlation between indoor concentrations of dichlorvos and those of trichlorfon suggested increased decomposition of trichlorfon in the indoor environment. Daily inhalation exposure estimated by using the fixed measurement data and time-activity questionnaire ranged from 0 to 35 ng/kg/day for trichlorfon, from 0 to 26 ng/kg/day for dichlorvos, and from 0 to 44 ng/kg/day for fenitrothion. Median inhalation exposure from indoor air accounted for 74%, 86.3%, and 45% of the daily inhalation exposure, respectively. For kindergarteners or nursery school children, inhalation exposure at childcare facilities was comparable with or more than that at home, indicating that pollution level at childcare facilities had potential of high impact on children's exposure. Estimated daily inhalation exposures were inversely correlated to the proximity of their activity location to the pesticide-applied farm.     

Evaluation of laboratory-made sludge for an anaerobic biodegradability test and its use for assessment of 13 chemicals

Laboratory-made sludge for a biogas based anaerobic biodegradability test was prepared as an alternative for digested sludge from wastewater treatment plants (WWTPs). Biodegradation activities and background gas productions of digested sludge from various WWTPs were found to vary significantly depending on the source, which adversely affected test reliability. Subsequently, test conditions such as sludge concentration and sludge washing were examined with the laboratory-made sludge and a sludge concentration of 1.0 g-SS/L without washing was determined to be most suitable. Under these conditions, biodegradability tests were conducted for 13 select chemicals and their relative toxicities to methanogenic bacteria were evaluated. The results of biodegradability tests showed that chemicals with -OH and -CH2OH radicals were readily biodegraded and those with -Cl, -NO2, -NH2, -SO3H and -CH3 had inhibited degradation responses m-nitriphenol and 2,4,6-trichlorophenol were highly toxic to methanogenic bacteria, with m-nitrophenol completely inhibiting methane fermentation as low as 20 mg/L.     

Life cycle of the jellyfish <Emphasis Type="Italic">Lychnorhiza lucerna</Emphasis> (Scyphozoa: Rhizostomeae)

The life cycle of Lychnorhiza lucerna (Scyphozoa: Rhizostomeae) and the settlement preferences of its larvae were studied using laboratory-based rearing experiments. Mature medusae of L. lucerna were collected from the beach of the Río de la Plata estuary, Argentina. This species displayed the typical metagenetic, (i.e. medusoid and polypoid), life cycle reported for other rhizostomes. The fertilized eggs developed into motile and short lived planulae. The majority of planulae settled on the air-water interface (p < 0.001). Of those that settled on the settlement plates provided, no significant differences were observed between styrene slides, glass slides and shells of the bivalve Mactra isabelleana (p > 0.05). No planulae settled on stones. Several hours after planulae settled, they metamorphosed into sessile four-tentacled scyphistomae. Most scyphistomae attached onto the air-water interface. At 19–22°C, the scyphistomae grew up to 22 tentacles and reached 1,500 μm height. The scyphistomae increased their numbers by means of formation of podocysts from which new polyps emerged and strobilated. Strobilation occurred 46 days after settlement. Only polydisk strobilation was observed and each strobila always produced three ephyrae. After releasing ephyrae, strobilae returned to normal scyphistomae and were capable of repeating strobilation. A single founder polyp was estimated to produce up to 60 ephyrae over 4 months. Ephyrae developed into metephyrae 15 days after release at 19–22°C. In this paper we describe the morphological and some behavioural features of L. lucerna in the polypoid and early medusoid stages.     

Determination of 1‐octanol/water partition coefficients of isocyanate compounds by an HPLC method

The octanol/water partition coefficients (P _ow) of six monoisocyanate and five diisocyanate compounds were determined by high performance liquid chromatograph (HPLC) methods. Two HPLC peaks, a broad tailed peak followed by a sharp one, were observed with all compounds. The later peak was identified as the isocyanate compound. The P _ow value for each isocyanate compound was determined by fitting the capacity factor of the peak to the regression equation drawn from those of reference compounds. The hydrophobic substituent constants for the isocyanate group were calculated with each of the compounds. The value of this constant was strongly dependent on the type of carbon bound to the isocyanate group and the average values for the aromatic and aliphatic isocyanate groups were 0.35 and — 0.52, respectively. Because of the reactivity of those compounds in the aquatic environment, the P _ow has little relevance to calculation of their environmental fate and ecotoxicity.     

A DFT study on the carbamates formation through the absorption of CO2 by AMP

DFT calculations in gas and aqueous solution phases have been performed to study the mechanism of carbamate formation by the absorption of CO₂ in 2-amino-2-methyl-1-propanol (AMP). The results reveal the importance of considering the effect of water as solvent for the reaction to proceed. Furthermore water molecules play an important role as a basic reactant leading to stable intermediates formation. These results point at a single-step, third order reaction as the most probable mechanism for the formation of carbamate by the absorption process.     

The pollution release and transfer register system in the U.S. and Japan: an analysis of productivity

This study analyzes Total Factor Productivity (TFP), which includes all categories of productivity. Our measure investigates productivity in the context of the provision and dissemination of environmental information policies. We investigated data on the emission of toxic chemical substances for the U.S. and Japanese manufacturing firms, including 386 firms for the period 1999-2007 and 466 firms for the period 2001-2008. The results show that productivity improved in all nine industrial sectors and that pollution levels were high in the U.S. and Japan from 2001 to 2007. In particular, the electronics industry improved rapidly after 2002 in both countries, which may be attributed to the enforcement of RoHS and the REACH directive in Europe. As a result of these stringent policies on toxic chemical emissions, the U.S. and Japanese firms, many of which export to the European market, have strong incentives to reduce their toxic chemical emissions.     

Influence of the Hydrothermal Pre-treatments on the Adsorption Characteristics of Activated Carbons from Woods

The hydrothermal treatments were conducted prior to the carbonization of oak woods and the obtained charcoals were activated using carbon dioxide or water vapor. The hydrothermal treatments brought about the elutions of acid-soluble lignin fractions as well as hemicellulose fractions accompanied with the decomposition of lignin carbohydrate complexes in the cell walls, which lowered not only the carbon yield of charcoal but also the crystal parameters for the carbon crystallites. However, the activated carbons (AC) produced via the hydrothermal pre-treatment showed superior adsorption properties especially for the adsorptions of 2-methylisoborneol and geosmin as compared with the untreated commercial AC. The hydrothermal treatments prior to the carbonization have some potential to increase the fractions of meso-pores effective for the adsorption of globular shaped molecules.