3D geomechanical modelling for CO2 geologic storage in the Dogger carbonates of the Paris Basin

CO₂ injection into a depleted hydrocarbon field or aquifer may give rise to a variety of coupled physical and chemical processes. During CO₂ injection, the increase in pore pressure can induce reservoir expansion. As a result the in situ stress field may change in and around the reservoir. The geomechanical behaviour induced by oil production followed by CO₂ injections into an oil field reservoir in the Paris Basin has been numerically modelled. This paper deals with an evaluation of the induced deformations and in situ stress changes, and their potential effects on faults, using a 3D geomechanical model. The geomechanical analysis of the reservoir–caprock system was carried out as a feasibility study using pressure information in a “one way” coupling, where pressures issued from reservoir simulations were integrated as input for a geomechanical model. The results show that under specific assumptions the mechanical effects of CO₂ injection do not affect the mechanical stability of the reservoir–caprock system. The ground vertical movement at the surface ranges from ?2 mm during oil production to +2.5 mm during CO₂ injection. Furthermore, the changes in in situ stresses predicted under specific assumptions by geomechanical modelling are not significant enough to jeopardize the mechanical stability of the reservoir and caprock. The stress changes issued from the 3D geomechanical modelling are also combined with a Mohr–Coulomb analysis to determine the fault slip tendency. By integrating the stress changes issued from the geomechanical modelling into the fault stability analysis, the critical pore pressure for fault reactivation is higher than calculated for the fault stability analysis considering constant horizontal stresses.     

Application of Cellulose Microfibrils in Polymer Nanocomposites

Cellulose microfibrils obtained by the acid hydrolysis of cellulose fibers were added at low concentrations (2–10% w/w) to polymer gels and films as reinforcing agents. Significant changes in mechanical properties, especially maximum load and tensile strength, were obtained for fibrils derived from several cellulosic sources, including cotton, softwood, and bacterial cellulose. For extruded starch plastics, the addition of cotton-derived microfibrils at 10.3% (w/w) concentration increased Young’s modulus by 5-fold relative to a control sample with no cellulose reinforcement. Preliminary data suggests that shear alignment significantly improves tensile strength. Addition of microfibrils does not always change mechanical properties in a predictable direction. Whereas tensile strength and modulus were shown to increase during addition of microfibrils to an extruded starch thermoplastic and a cast latex film, these parameters decreased when microfibrils were added to a starch–pectin blend, implying that complex interactions are involved in the application of these reinforcing agents.     

Organic aerosol molecular composition and gas–particle partitioning coefficients at a Mediterranean site (Corsica)

Molecular speciation of atmospheric organic matter was investigated during a short summer field campaign performed in a citrus fruit field in northern Corsica(June 2011). Aimedat assessing the performance on the field of newly developed analytical protocols, this work focuses on the molecular composition of both gas and particulate phases and provides an insight into partitioning behavior of the semi-volatile oxygenated fraction. Limonene ozonolysis tracers were specifically searched for, according to gas chromatography–mass spectrometry(GC–MS) data previously recorded for smog chamber experiments. A screening of other oxygenated species present in the field atmosphere was also performed. About sixty polar molecules were positively or tentatively identified in gas and/or particle phases. These molecules comprise a wide range of branched and linear, mono and di-carbonyls(C_3–C7),mono and di-carboxylic acids(C_3–C_18), and compounds bearing up to three functionalities.Among these compounds, some can be specifically attributed to limonene oxidation and others can be related to α- or β-pinene oxidation. This provides an original snapshot of the organic matter composition at a Mediterranean site in summer. Furthermore, for compounds identified and quantified in both gaseous and particulate phases, an experimental gas/particle partitioning coefficient was determined. Several volatile products, which are not expected in the particulate phase assuming thermodynamic equilibrium, were nonetheless present in significant concentrations. Hypotheses are proposed to explain these observations, such as the possible aerosol viscosity that could hinder the theoretical equilibrium to be rapidly reached.     

Contrasting foraging tactics by northern gannets (<Emphasis Type="Italic">Sula bassana</Emphasis>) breeding in different oceanographic domains with different prey fields

In order to forage and to provision offspring effectively, seabirds negotiate a complex of behavioural, energetic, environmental and social constraints. In first tests of GPS loggers with seabirds in North America, we investigated the foraging tactics of free-ranging northern gannets (Sula bassana) at a large and a medium-sized colony that differed in oceanography, coastal position and prey fields. Gannets at Low Arctic colony (Funk Island) 50 km off the northeast coast of Newfoundland, Canada provisioned chicks almost entirely with small forage fish (capelin Mallotus villosus, 89%), while at boreal colony (Bonaventure Island) 3 km from shore in the Gulf of St. Lawrence, Quebec, Canada, large pelagic fish dominated parental prey loads (Atlantic mackerel Scomber scombrus 50%, Atlantic herring Clupea harengus 33%). Mean foraging range and the total distance travelled per foraging trip were significantly greater at the larger inshore colony (Bonaventure) than at the smaller offshore colony (Funk Island; 138 and 452 km vs. 64 and 196 km, respectively). Gannets from Funk Island consistently travelled inshore to forage on reproductive capelin shoals near the coast, whereas foraging flights of birds from Bonaventure were much more variable in direction and destination. Birds from the Low Arctic colony foraged in colder sea surface water than did birds from the boreal colony, and dive characteristics differed between colonies, which is concordent with the difference in prey base. Differences between the colonies reflect oceanographic and colony-size influences on prey fields that shape individual foraging tactics and in turn generate higher level colony-specific foraging “strategies”.     

Quantitative cancer risk assessment and local mortality burden for ambient air pollution in an eastern Mediterranean City

Health risks posed by ambient air pollutants to the urban Lebanese population have not been well characterized. The aim of this study is to assess cancer risk and mortality burden of non-methane hydrocarbons (NMHCs) and particulates (PM) based on two field-sampling campaigns conducted during summer and winter seasons in Beirut. Seventy NMHCs were analyzed by TD-GC-FID. PM_2.5 elemental carbon (EC) components were examined using a Lab OC-EC aerosol Analyzer, and polycyclic aromatic hydrocarbons were analyzed by GC-MS. The US EPA fraction-based approach was used to assess non-cancer hazard and cancer risk for the hydrocarbon mixture, and the UK Committee on Medical Effects of Air Pollutants (COMEAP) guidelines were followed to determine the PM_2.5 attributable mortality burden. The average cumulative cancer risk exceeded the US EPA acceptable level (10⁻⁶) by 40-fold in the summer and 30-fold in the winter. Benzene was found to be the highest contributor to cancer risk (39–43%), followed by 1,3-butadiene (25–29%), both originating from traffic gasoline evaporation and combustion. The EC attributable average mortality fraction was 7.8–10%, while the average attributable number of deaths (AD) and years of life lost (YLL) were found to be 257–327 and 3086–3923, respectively. Our findings provide a baseline for future air monitoring programs, and for interventions aiming at reducing cancer risk in this population.

     

Metal ion and other key water quality constituent attenuation in soil columns

A set of soil columns was constructed to simulate discharge of disinfected tertiary treated wastewater to a river via nearby land application or indirect discharge. The system was primarily designed to observe the fate of metal ions and nutrients. The following three experiments were conducted: (1) flow through saturated soils only, which simulates indirect discharge where water is directly applied to groundwater; (2) flow through unsaturated soil followed by saturated flow, which simulates vadose then saturated zone transport; and (3) saturated flow only using ethylene diamine tetraacetic acid-metal chelates, which determined effects of metal organic complexes on metal mobility through the soil. Metal ion attenuation was substantial but not complete in experiments 1 and 2 (removal: 68% Cu2+, 43% Ni2+, 98% Pb2+, and 96% Hg2+), which was somewhat contrary to modeling results. Cyanide attenuation was also monitored (92% removal). In experiment 3, lead attenuation was somewhat reduced (92% removal) and delayed (requiring additional residence time); copper attenuation was significantly reduced (38% removal) and delayed; and nickel concentrations were higher in the 28-day sample (> 80 microg/L) than in the column feed water (58 microg/L). Near-complete denitrification and total phosphorus attenuation were observed. For the water quality constituents studied, unsaturated (vadose zone) transport did not appear to add additional benefit.