Polyaniline films for efficient removal of aromatic acids from water

Adsorbents in the form of powders are commonly used to filtrate organic compounds in waters. However, this technique requires the separation of the solid phase from the solution after adsorption experiments. Here we propose the use of films as adsorbents. We synthesized polyaniline films by chemical oxidative polymerization of aniline on red ceramic brick. This film was tested to remove trimellitic, hemimellitic and pyromellitic acids as model molecules of the biodegradation of aquatic humic substances. We evaluated the effect of pH, contact time and initial concentration. Our results show that optimal adsorption conditions required 45 min of solid/liquid contact at pH 7 and an initial concentration of 20 mg/l. The maximum adsorption capacities for hemimellitic, trimellitic and pyromellitic acids are 154.83 for hemimellitic acid, 161.88 for trimellitic acid and 175.26 mg/g for pyromellitic acid. The adsorption efficiency of the polyaniline film decreased only by 13 % after four cycles. Overall, we conclude that polyaniline films are promising separable adsorbents compared to conventional adsorbents for removal of aromatic polycarboxylic acids from water.     

Investigation on removal pathways of Di 2-ethyl hexyl phthalate from synthetic municipal wastewater using a submerged membrane bioreactor

Highly hydrophobic Di 2-ethyl hexyl phthalate (DEHP) is one of the most prevalent plasticizers in wastewaters. Since its half-life in biological treatment is around 25 days, it can be used as an efficiency indicator of wastewater treatment plant for the removal of hydrophobic emerging contaminants. In this study, the performance of submerged membrane bioreactor was monitored to understand the effect of DEHP on the growth of aerobic microorganisms. The data showed that the chemical oxygen demand (COD) and ammonia concentration were detected below 10 and 1.0 mg/L, respectively for operating conditions of hydraulic retention time (HRT) = 4 and 6 hr, sludge retention time (SRT) = 140 day and sludge concentration between 11.5 and 15.8 g volatile solid (VS)/L. The removal efficiency of DEHP under these conditions was higher and ranged between 91% and 98%. Results also showed that the removal efficiency of DEHP in biological treatment depended on the concentration of sludge, as adsorption is the main mechanism of its removal. For the submerged membrane bioreactor, the pore size is the pivotal factor for DEHP removal, since it determines the amount of soluble microbial products coming out of the process. Highly assimilated microorganisms increase the biodegradation rate, as 74% of inlet DEHP was biodegraded; however, the concentration of DEHP inside sludge was beyond the discharge limit. Understanding the fate of DEHP in membrane bioreactor, which is one of the most promising and futuristic treatment process could provide replacement for conventional processes to satisfy the future stricter regulations on emerging contaminants.     

Critical review of EPS production, synthesis and composition for sludge flocculation

Extracellular polymeric substances(EPS) produced by microorganisms represent biological macromolecules with unfathomable potentials and they are required to be explored further for their potential application as a bioflocculant in various wastewater sludge treatment. Although several studies already exist on biosynthetic pathways of different classical biopolymers like alginate and xanthan, no dedicated studies are available for EPS in sludge. This review highlights the EPS composition, functionality, and biodegradability for its potential use as a carbon source for production of other metabolites. Furthermore, the effect of various extraction methods(physical and chemical) on compositional, structural, physical and functional properties of microbial EPS has been addressed. The vital knowledge of the effect of extraction method on various important attributes of EPS can help to choose the suitable extraction method depending upon the intended use of EPS. The possible use of different molecular biological techniques for enhanced production of desired EPS was summarized.     

Application of calcium alginate-PANI@sawdust wood hydrogel bio-beads for the removal of orange G dye from aqueous solution

Environmental Science and Pollution Research - This work aims to investigate the adsorption performance of orange G (OG) dye from aqueous solutions employing PANI@sawdust biocomposite enrobed by...