工业含氟废水在土壤中扩散规律的研究——以太原磷肥厂地区的土壤为例

近年来磷肥工业的迅速发展所造成的氟污染日趋严重,已引起人们的关注。磷肥生产过程中排出的废水含氟浓度高达7～8g/L。目前较为成熟的办法是石灰中和法,但该法投资大(如中小型磷肥厂的投资达100万元以上),而且年运转费还需要9万多元。另外,石灰中和后的废渣堆放问题也难以解决。所以目前我国大多数磷肥厂对废水的排放是通过明沟或暗道辗转排入河道或城市下水道中。关于明沟中污染物的扩散规律已有不少论述,但对明沟中氟元素向周围土壤的扩散规律尚少见报道。本文以太原磷肥厂排污30年的明沟解剖分析为     

弹射起飞和拦阻着陆冲击试验方法探讨

目的研究舰载机机载装备弹射起飞和拦阻着陆冲击试验的工程实现方法。方法从GJB 150.18A—2009、MIL-STD-810F/G及其提供的实测数据出发,分析弹射起飞和拦阻着陆冲击载荷特征,对几种常用试验方法的工程实现进行探讨和比较。结果弹射起飞和拦阻着陆冲击具有瞬态、交变、低频、大位移、高速度等特征。阻尼正弦波方法的实施路径比较明确,复杂波形再现方法实施路径比较模糊且复杂,超长脉冲半正弦波方法具有多种局限性,前两种方法的速度、位移都较大。结论阻尼正弦波方法较复杂波形再现方法更容易实现,但两者都需要大位移、高速度的专用冲击试验设备和适当的波形处理技术,超长脉冲半正弦波方法在前面两种标准推荐方法能够实现时,不建议使用。     

对二氯苯、四氯乙烯和镉联合污染对草鱼的毒性效应研究

文章采用水生污染暴露试验和Marking相加指数评价法,研究了对二氯苯(P-DCB)、四氯乙烯(PCE)和重金属镉(Cd~(2+))对草鱼的联合毒性。结果表明:单一P-DCB、PCE和Cd~(2+)污染对草鱼的24、48、72和96 h的半数致死质量浓度依次是10.11、9.04、8.52、7.97,46.13、41.58、36.51、34.56和45.58、34.81、28.63、24.05 mg/L;由此可见,它们的单一毒性均为高毒,并且其毒性顺序为P-DCB>Cd~(2+)>PCE。P-DCB、PCE和Cd~(2+)对草鱼的联合毒性,在浓度1∶1时,表现出暴露时间为24、48、72和96 h的相加指数分别为-0.75、-0.46、-0.32和0.11,联合作用结果为先拮抗作用,随着时间的增加,拮抗作用减弱,最后转为毒性剧增的协同效应。而在毒性1∶1时,表现出暴露时间为24、48、72和96 h的AI分别为-0.41、-0.37、-0.17和-0.14,所以联合作用结果是为拮抗作用,随着时间的增加,拮抗作用减弱。     

Development of an ombrotrophic peat bog (low ash) reference material for the determination of elemental concentrations

Given the increasing interest in using peat bogs as archives of atmospheric metal deposition, the lack of validated sample preparation methods and suitable certified reference materials has hindered not only the quality assurance of the generated analytical data but also the interpretation and comparison of peat core metal profiles from different laboratories in the international community. Reference materials play an important role in the evaluation of the accuracy of analytical results and are essential parts of good laboratory practice. An ombrotrophic peat bog reference material has been developed by 14 laboratories from nine countries in an inter-laboratory comparison between February and October 2002. The material has been characterised for both acid-extractable and total concentrations of a range of elements, including Al, As, Ca, Cd, Cr, Cu, Fe, Hg, Mg, Mn, Na, Ni, P, Pb, Ti, V and Zn. The steps involved in the production of the reference material (i.e. collection and preparation, homogeneity and stability studies, and certification) are described in detail.     

Trihalomethanes in Drinking Water of Greater Québec Region (Canada): Occurrence, Variations and Modelling

The levels of trihalomethanes (THMs) – the main species of by-product from water chlorination – were monitored in thedistribution systems of the five major drinking water utilitiesof the greater area of Québec City in order to investigate andmodel their occurrence on a spatial and seasonal basis. Data forTHMs and other water quality and operational parametersassociated with their formation were generated through a 16 monthsampling program involving several sites representing variablewater residence times, from the plant to the system extremity.The results demonstrate that the differences in measured THMlevels between the five utilities are mainly due to the variablequality of raw waters, the type of water treatment process beingused and the type and levels of applied disinfectant. Dependingon the utility, average THM levels were from 1.3 to 2.5 timeshigher in the system extremities than in the water leaving thetreatment plant. Also, average levels of THMs measured in summerat the distribution system extremities were, depending on theutility, from 2.5 to 5 times higher than the average levelsmeasured in winter. The seasonal differences were found to besignificantly greater than those observed by others in waterutilities in the United States and Europe and are explained inlarge part by the considerable changes, over the year, in thequality and temperature of surface waters in Southern Québec. Forthe five utilities under study, multivariate regression modelswere developed in order to predict spatial and seasonalvariations of THMs. Both residual chlorine demand and temperaturewere found to be better, statistically, as predictors for THMoccurrence. The usefulness of the developed models for routineand long term water quality management, as well as for assessmentof human exposure to THMs, are also discussed.     

The Variability of Estimates of Variance, and Its Effect on Power Analysis in Monitoring Design

Power analysis can be a valuable aid in the design of monitoringprograms. It requires an estimate of variance, which may come from a pilot study or an existing study in a similar habitat. For marine benthic infauna, natural variation in abundances canbe considerable, raising the question of reliability of varianceestimates. We used two existing monitoring programs to generatemultiple estimates of variance. These estimates were found to differ from nominated best estimates by 50% or more in 43% of cases, in turn leading to under or over-estimation of samplesize in the design of a notional monitoring program. The twostudies, from the same general area, using the same samplingmethods and spanning a similar time scale, gave estimatesvarying by more than an order of magnitude for 25% of taxa.We suggest that pilot studies for ecological monitoring programsof marine infauna should include at least two sampling times.     

Chemical monitoring and evaluation of the water quality of the Douro River at the Crestuma-Lever dam

Water taken from the Crestuma-Lever dam on the Douro River was evaluated considering the Portuguese Decree-law no. 236/98 of 1st August, 1998. This paper presents the metrological characteristics, validation of analytical methodologies and the data obtained from seasonal samplings. The test parameters selected are: temperature, pH, chloride, conductivity, carbon dioxide, alkalinity, hardness, oxidability, dissolved oxygen, BOD5, total suspended solids, sulfide, phosphate, silica, ammonium, nitrite, nitrate, sulfate, sodium, potassium, calcium, magnesium, iron, manganese, copper and zinc. From data analysis we can conclude that the water presented the following characteristics: a pH situated in the neutral zone; a median mineralization; a medium hardness; well oxygenated water; and a carbonate hardness exclusively due to bicarbonates. The temperature, pH, dissolved oxygen, ammonia, chlorides, sulfates, copper, zinc and BOD5 were compared with the legal limits presented in annexes XXI and I of Decree-law 236/98. The results relating to total hardness, nitrites, calcium, magnesium, sodium, potassium, aluminium, sulfides and oxidability were compared with the legal values in annex VI as there are no limits relating to these parameters in annexes XXI and I.     

A catalogue of urban hydrocarbons for the city of Leeds: atmospheric monitoring of volatile organic compounds by thermal desorption-gas chromatography

A method has been developed for the speciation and quantitative determination of hydrocarbons in urban air in the city of Leeds. Hydrocarbons were pre-concentrated by adsorbent tube air sampling and analyzed using thermal desorption and gas chromatography with flame ionization detection and structural confirmation by mass spectrometric detection. While automated volatile organic compound (VOC) analyzers produced data for a maximum of about 30 compounds simultaneously, with the method described here, a total of 68 C6-C12 hydrocarbons were measured simultaneously in one analysis at parts per billion (ppb) levels. Several monitoring surveys were performed, one during the winter of 1993 and the other in the summer of 1994, at a number of sites to investigate the levels of VOCs identified in the urban air of Leeds.     

Atrazine and Alachlor Inputs to Surface and Ground Waters in Irrigated Corn Cultivation Areas of Castilla-Leon Region, Spain

The inputs of atrazine and alachlor herbicides to surface and ground waters from irrigated areas dedicated to corn cultivation in the Castilla-León (C-L) region (Spain) as related to the application of both herbicides were studied. Enzyme-linked immunosorbent assays (ELISA) were used for monitoring the atrazine and alachlor concentrations in 98 water samples taken from these areas. Seventy-nine of the samples were of ground waters and 19 were of surface waters. The concentration ranges of the herbicides detected in the study period (October 1997–October 1998) were 0.04–25.3 g L^–1 in the surface waters and 0.04–3.45 g L^–1 in the ground waters for atrazine, and 0.06–31.9 g L^–1 in the surface waters and 0.05–4.85 g L^–1 in the ground waters in the case of alachlor. The highly significant correlation observed between the concentrations of both herbicides in the surface waters (r = 0.89, p < 0.001) pointed to a parallel transport of atrazine and alachlor to these waters. A study was made of the temporal evolution of the concentrations of both herbicides, and it was found a maximum recharge of atrazine in the ground waters for April 1998 and of alachlor in October 1997 and October 1998. The temporal evolution of the concentrations of both herbicides in surface waters was parallel. The highly significant correlations observed between atrazine concentrations determined by ELISA and by HPLC (r = 0.92, p < 0.001) and between alachlor concentrations also determined by both methods (r = 0.96, p < 0.001) confirmed the usefulness of ELISA for monitoring both herbicides in an elevated number of samples. Using HPLC, the presence in some waters of the alachlor ethanesulfonate (ESA) metabolite was found at a concentration range of 0.52–4.01 g L^–1. However the interference of ESA in the determination of alachlor by ELISA was negligible. The inputs of atrazine and alachlor to waters found in this study, especially the inputs to ground waters, could pose a risk for human health considering that some waters, though sporadically, are even used for human consumption.     

Overestimates of black carbon in soils and sediments

Several recent reports suggest that black carbon (BC), which broadly encompasses charcoal, soot, and other forms of pyrogenic carbon, may constitute a significant proportion of the refractory carbon in soil and sedimentary organic matter. BC is a sink for biospheric and atmospheric carbon dioxide, and is intimately tied to the biogeochemical cycling of both carbon and oxygen through its role in organic matter cycling. Additionally, BC may represent a large fraction of the missing carbon sink in global carbon accounting. Here, we demonstrate that documented measurements of BC may be the result of methodological artifacts, which inadvertently overestimate the amount of BC. We found that a widely used thermal oxidative method can create a residue that falls under the operational definition of BC in samples that are relatively BC-free. Moreover, during this procedure, labile organic matter constituents are condensed into pyrogenic carbon, implying that the labile components are present in lesser quantities. These methodological deficiencies are promoting overestimates in the amount of refractory carbon in soil and sedimentary organic matter and may endorse inaccuracies in the rates of carbon fluxes, the mean residence times of terrestrial carbon, and organic matter burial rates in oceanic environments.