Antimony distribution and mobility in topsoils and plants (Cytisus striatus, Cistus ladanifer and Dittrichia viscosa) from polluted Sb-mining areas in Extremadura (Spain)

A study about topsoil antimony distribution and mobility from the soils to the biomass has been afforded in three abandoned Sb mining areas located at Extremadura. Physico-chemical characteristics of the soils and total antimony levels were measured in soils and autochthonous plant species (Cytisus striatus, Cistus ladanifer and Dittrichia viscosa). Comparison with corresponding values in reference areas isolated from the mining activities is discussed. Antimony mobility in the soils was estimated by measuring the water extractable fraction; low results were obtained for the three soil areas, with no statistical differences. Plant ability to accumulate antimony was estimated by use of plant accumulation coefficients (PAC). Seasonal (spring vs. autumn) effects on the antimony content in the plant species. Cytisus striatus from Mari Rosa mine presented antimony excluder characteristics, whereas Dittrichia viscosa specimens growing in San Antonio mine showed a significant antimony bioaccumulation.     

Particulate matter levels in a South American megacity: the metropolitan area of Lima-Callao,Peru

The temporal and spatial trends in the variability of PM₁₀ and PM_2.5 from 2010 to 2015 in the metropolitan area of Lima-Callao, Peru, are studied and interpreted in this work. The mean annual concentrations of PM₁₀ and PM_2.5 have ranges (averages) of 133–45 μg m^?3 (84 μg m^?3) and 35–16 μg m^?3 (26 μg m^?3) for the monitoring sites under study. In general, the highest annual concentrations are observed in the eastern part of the city, which is a result of the pattern of persistent local winds entering from the coast in a south-southwest direction. Seasonal fluctuations in the particulate matter (PM) concentrations are observed; these can be explained by subsidence thermal inversion. There is also a daytime pattern that corresponds to the peak traffic of a total of 9 million trips a day. The PM_2.5 value is approximately 40% of the PM₁₀ value. This proportion can be explained by PM₁₀ re-suspension due to weather conditions. The long-term trends based on the Theil-Sen estimator reveal decreasing PM₁₀ concentrations on the order of ?4.3 and ?5.3% year^?1 at two stations. For the other stations, no significant trend is observed. The metropolitan area of Lima-Callao is ranked 12th and 16th in terms of PM₁₀ and PM_2.5, respectively, out of 39 megacities. The annual World Health Organization thresholds and national air quality standards are exceeded. A large fraction of the Lima population is exposed to PM concentrations that exceed protection thresholds. Hence, the development of pollution control and reduction measures is paramount.     

Double Green Process: a low environmental impact method for recycling of CdTe,a-Si and CIS/CIGS thin-film photovoltaic modules

On the basis of the method for managing the end of life of CdTe photovoltaic panels previously proposed by the authors, a new method for the recycling of all types of thin-film panels (CdTe, a-Si and CIS/CIGS) has been developed and optimised under a research project founded by Enel Foundation and CRUI Foundation. The DGP process has been developed through a feasibility study carried out from three points of view: technical, environmental and economic. The process is composed by two sub-processes matched to each other, one suitable for CdTe panels (named DGPa) and the other one for a-Si and CIS/CIGS panels (DGPb). The Double Green Panel process is based mainly on mechanical treatments with a minimum use of chemicals and it is characterised by a greater level of automation and a high flexibility in production capacity. The potential environmental impacts of various configurations of the DGP process have been extensively analysed with LCA tool in order to develop an environmentally friendly process. The economic feasibility has been assessed through the Discounted Cash Flow Analysis (DCFA) method. The revenues associated to the recovery of valuable and common materials and the recycling costs have been taken into account.     

The Efficacy of a Programme of Landslide Risk Reduction in Areas of Unplanned Housing in the Eastern Caribbean

Poor countries are disproportionately affected by the cost of disasters. Yet there is evidence of the benefits of seeking to mitigate the impact of a disaster, compared with the costs incurred in ‘making good’ after a major event has occurred. This article reviews a programme of landslide risk reduction in unplanned communities in the Eastern Caribbean. The construction of appropriate surface water management measures, based on the application of scientific and engineering principles, has been demonstrated to reduce the hazard from rainfall-triggered landslides. Adopting a community-based approach additionally delivers social and environmental benefits relating to employment generation, improvements in the environmental conditions within the community, and improvements slope management practices. The sustained implementation of the community-based projects has provided the necessary evidence-base for these practices to influence Government policy and practice, and gain recognition from regional development agencies. The strategic and incremental uptake of the community-based methodology is demonstrated to be an effective means for delivering physical landslide risk reduction measures in the most ‘at risk’ areas of unplanned housing.     

Wet extraction of heavy metals and chloride from MSWI and straw combustion fly ashes

Fly ash residues from combustion often do not meet the criteria neither for reuse as construction materials nor landfilling as non-hazardous waste, mainly because of the high concentration of heavy metals and chlorides. This work aimed to technically evaluate an innovative wet treatment process for the extraction of chloride (Cl^?), cadmium (Cd), copper (Cu), lead (Pb) and zinc (Zn) from fly ashes from a municipal solid waste incineration (MSWI) plant and from a straw combustion (SC) facility. Factors investigated were liquid/solid (L/S) ratio, full carbonation (CO₂ treatment), influence of pH and leaching time, using a two-level full factorial design. The most significant factor for all responses was low pH, followed by L/S ratio. Multiple linear regression models describing the variation in extraction data had R² values ranging from 58% to 98%. An optimization of the element extraction models was performed and a set of treatment conditions is suggested.     

Reproductive isolation and reproductive output in two sympatric mussel species (Mytilus edulis, M. trossulus) and their hybrids from Newfoundland

The mussels Mytilus edulis L. and M. trossulus Gould are found sympatrically in most areas of Newfoundland, with a low frequency of hybrids. To assess the potential for reproductive isolation, we sampled mussels from three sites in an eastern Newfoundland Bay from May–October 1996 to determine if there were differences in the reproductive cycles of the two species and their natural hybrids. In mussels with sheil lengths of 38–42 mm, males and females with mature gametes were dominant in June for M. edulis and hybrids, while M. trossulus showed a lower frequency of individuals with mature gametes. M. trossulus and hybrids spawned over a prolonged period (from late spring to early autumn) compared with most M. edulis individuals that spawned over a period of 2–3 weeks in July. This asynchrony in spawning activity between the two species may partially explain the low frequency of hybrids found in previous studies of these mussel populations. Female and male hybrids between M. edulis and M. trossulus showed normal gonad development, ripening and spawning, providing an opportunity for the introgression of genes between the two species. M. trossulus had a higher reproductive output than M. edulis of similar shell length, while hybrids showed intermediate values of reproductive output. M. trossulus females produced smaller eggs than either M. edulis or hybrids. Differences in reproductive traits may partially explain the maintenance of the mussel hybrid zone in Newfoundland. Published online: 13 August 2002     

Docosahexaenoic acid accumulation in thraustochytrids: search for the rationale

Thraustochytrid protists characteristically accumulate high amounts of lipids, much of which is comprised of the polyunsaturated fatty acid, docosahexaenoic acid (DHA). Since DHA is important in human health, thraustochytrids have attracted much attention from the point of view of biotechnology. However, the biological rationale of DHA production in the storage lipids of these organisms is not clear. We carried out three experiments to study this. (1) The fate of lipids in thraustochytrids during development was studied by staining lipids of vegetative cells with the fluorescent vital stain for lipids, namely Nile blue, following the growth of the cells. The fluorescent lipid bodies decreased in abundance in freshly formed motile limaciform amoeboid cells and subsequently disappeared when they moved away. When vegetative cells produced vast extensions of plasma membrane, the ectoplasmic net elements (EN), the fluorescent lipids appeared to be transported to them. (2) Changes in lipids and DHA during starvation were examined in cells with enhanced lipid and DHA contents and those in which they were not enhanced. Cells in which lipids and DHA were enhanced by refrigerating them for 48 h survived starvation for a longer period. Compared to cells that had not been refrigerated, total fatty acids, as well as DHA were marginally higher in pre-refrigerated cells, while palmitic acid levels were lower. Starvation of cells resulted in a gradual decrease of absolute concentrations and percentage levels of DHA after 8 days, while percentage of palmitic acid levels increased. (3) The relationship between DHA and specific gravity of cells was studied by comparing cells pre-refrigerated as above with those which were not pre-refrigerated. Refrigerated cells with increased lipids and DHA showed higher specific gravities than non-refrigerated cells. We suggest the following roles for storage lipids and DHA in thraustochytrids: (1) lipids serve as energy sources during movement of cells and for production of EN; (2) DHA in storage lipids become distributed in the plasma membrane when EN are formed; (3) DHA is preferably utilized as a fatty acid energy reserve during starvation and (4) an unknown mechanism results in negative buoyancy of cells when total lipids and DHA are marginally enhanced. DHA in storage lipids might be crucial to the survival of thraustochytrid cells.     

Non-electrostatic surface complexation models for protons and lead(II) sorption onto single minerals and their mixture

Potentiometric titrations and lead sorption tests were conducted using muscovite, clinochlore, hematite, goethite, quartz, and a mixture of these same minerals. Mechanistic models were developed to represent and interpret these data. The aim was isolating the specific contribution of each mineral in proton and lead binding. Acid-base properties of each single mineral as well as their mixture were represented by discrete models, which consider the dissociation of n monoprotic sites (n-site/n-K(H) models). A one-site/one-K(H) model (logK(H1) = 10.69) was chosen for quartz (dissociation of SiOH edge hydroxyl groups). Goethite and hematite (FeOH groups) were represented by the same one-site/one-K(H) model (logK(H1) = 10.35). Three-site/three-K(H) models were used for muscovite (logK(H1) = 4.18; logK(H2) = 6.65; logK(H3) = 9.67) and clinochlore (logK(H1) = 3.84; logK(H2) = 6.57; logK(H3) = 9.71) assuming that SiOH and AlOH of the aluminosilicate matrix dissociate in the acid-neutral pH range while SiOH groups of quartz inclusions dissociate in the basic range. Similarly, the mixture of these minerals was represented by a three-site/three-K(H) model (logK(H1) = 3.39; logK(H2) = 6.72; logK(H3) = 10.82). According to crossed comparisons with single minerals, the first two sites of the mixture were associated with the aluminosilicate matrix (SiOH and AlOH respectively) and the third site with iron oxides (FeOH) and quartz groups. Additivity of proton binding in the mixture was demonstrated by simulating the mixture's titration curve. A unified model for the entire set of titration curves (single minerals and mixture) was also developed introducing a three-peak distribution function for proton affinity constants. Experimental data for lead sorption onto the mixture and individual minerals in 3-5 pH range denoted the competition between protons and metallic ions. The entire set of lead isotherms (individual mineral and mixture data) was represented adequately by a unified model taking into account both monodentate and bidentate complexes with the three active sites (additivity of lead binding). Experimental data of metal distribution in solid and liquid phases were successfully simulated by implementing the protonation and the surface complexation constants into the database of a dedicated software for chemical equilibria.