Improvement of an efficient separation method for chemicals in diesel exhaust particles: analysis for nitrophenols

GOAL, SCOPE, AND BACKGROUND: Diesel exhaust is believed to consist of thousands of organic constituents and is a major cause of urban pollution. We recently reported that a systematic separation procedure involving successive solvent extractions, followed by repeated column chromatography, resulted in the isolation of vasodilatory active nitrophenols. These findings indicated that the estimation of the amount of nitrophenols in the environment is important to evaluate their effect on human health. The isolation procedure, however, involved successive solvent extractions followed by tedious, repeated chromatography, resulting in poor fractionation and in a significant loss of accuracy and reliability. Therefore, it was crucial to develop an alternative, efficient, and reliable analytical method. Here, we describe a facile and efficient acid-base extraction procedure for the analysis of nitrophenols. MATERIALS AND METHODS: Diesel exhaust particles (DEP) were collected from the exhaust of a 4JB1-type engine (ISUZU Automobile Co., Tokyo, Japan). Gas chromatography-mass spectrometry (GC-MS) analysis was performed with a GCMS-QP2010 instrument (Shimadzu, Kyoto, Japan). RESULTS: A solution of DEP in 1-butanol was extracted with aqueous NaOH to afford a nitrophenol-rich oily extract. The resulting oil was methylated with trimethylsilyldiazomethane and subsequently subjected to GC-MS analysis, revealing that 4-nitrophenol, 3-methyl-4-nitrophenol, 2-methyl-4-nitrophenol, and 4-nitro-3-phenylphenol were present in significantly higher concentrations than those reported previously. DISCUSSION: Simple acid-base extraction followed by the direct analysis of the resulting extract by GC-MS gave only broad peaks of nitrophenols with a poor detection limit, while the GC-MS analysis of the sample pretreated with (trimethylsilyl)diazomethane gave satisfactorily clear chromatograms with sharp peaks and with a significantly lowered detection limit (0.5 ng/ml, approximately 100 times). CONCLUSION: The present method involving an acid-base extraction, in situ derivatization, and GC-MS analysis has shown to be a simple, efficient, and reliable method for the isolation and identification of the chemical substances in DEP.     

Potential bioremediation of mercury-contaminated substrate using filamentous fungi isolated from forest soil

The use of filamentous fungi in bioremediation of heavy metal contamination has been developed recently. This research aims to observe the capability of filamentous fungi isolated from forest soil for bioremediation of mercury contamination in a substrate. Six fungal strains were selected based on their capability to grow in 25 mg/L Hg2+-contaminated potato dextrose agar plates. Fungal strain KRP1 showed the highest ratio of growth diameter, 0.831, thus was chosen for further observation.Identification based on colony and cell morphology carried out by 18S rRNA analysis gave a 98%match to Aspergillus flavus strain KRP1. The fungal characteristics in mercury(Ⅱ) contamination such as range of optimum pH, optimum temperature and tolerance level were 5.5–7 and 25–35℃ and 100 mg/L respectively. The concentration of mercury in the media affected fungal growth during lag phases. The capability of the fungal strain to remove the mercury(Ⅱ) contaminant was evaluated in 100 mL sterile 10 mg/L Hg2+-contaminated potato dextrose broth media in 250 mL Erlenmeyer flasks inoculated with 108spore/mL fungal spore suspension and incubation at 30℃ for 7 days. The mercury(Ⅱ) utilization was observed for flasks shaken in a 130 r/min orbital shaker(shaken) and nonshaken flasks(static) treatments. Flasks containing contaminated media with no fungal spores were also provided as control. All treatments were done in triplicate. The strain was able to remove 97.50%and 98.73% mercury from shaken and static systems respectively. A. flavus strain KRP1 seems to have potential use in bioremediation of aqueous substrates containing mercury(Ⅱ) through a biosorption mechanism.     

Intensification level of rice farming in Myanmar: implication for its sustainable development

This study aims to estimate the intensification of rice farming in Myanmar particularly due to chemical fertilizer application, using farm-level data obtained from field surveys conducted in the 2000s. Relatively high-input rice farming was found in dry season crop in the delta zone and the double crop in well-irrigated lowlands of the central dry zone. The chemical fertilizer used there was about 88–159 kg NPK (nitrogen, N; phosphate, P₂O₅; and potash, K₂O) ha⁻¹ (76–110 kg nitrogen (N) ha⁻¹), and the average paddy yield ranged from 2.8 to 3.5 ton ha⁻¹. On the other hand, nutrient input in survey sites of rain-fed lowland was between 11 and 53 kg NPK ha⁻¹ (5 and 36 kg N ha⁻¹), and the yield ranged from 1.1 to 2.3 ton ha⁻¹. The national average of paddy yield and nutrient input of fertilizer was roughly estimated to be around 2.4 ton ha⁻¹ and 60 kg NPK ha⁻¹, respectively. A gap was observed between these calculated values and the official statistics. A comparison of fertilizer use efficiency for rice production in Myanmar with that in China and Vietnam has shown that the efficiency in Myanmar has not declined to an inappropriate level even in its intensive ones. Rice production in Myanmar has room for increasing the yield by capital intensification. Nevertheless, considering its sustainability as well as productivity, further intensification in rice farming technology in irrigated lowlands of Myanmar may neither be the best nor the only way.     

Biohydrogen using leachate from an industrial waste landfill as inoculum

Since hydrogen is a renewable energy source, biohydrogen has been researched in recent years. However, data on hydrogen fermentation by a leachate from a waste landfill as inoculum are scarce. We investigated hydrogen production using a leachate from an industrial waste landfill in Kanagawa Prefecture. The results showed no methane gas production, and the leachate was a suitable inoculum for hydrogen fermentation. The maximum H₂ yield was 2.67 mol of H₂ per mol of carbohydrate added, obtained at 30°C and an initial pH of 7. The acetate and butyrate production was significant when the H₂ yield was higher. Oxidation–reduction potential analysis of the culture suggested that hydrogen-producing bacteria in the leachate were facultative anaerobic. Scanning electron microscope observations revealed that the hydrogen-producing bacteria comprised bacilli about 2 μm in length.     

Transmission of ice-nucleating active bacteria from a prey reduces cold hardiness of a predator (Araneae: Theridiidae)

The influence of ice-nucleating active (INA) bacteria on cold hardiness of the house spider, Achaearanea tepidariorum, was determined by measuring the supercooling point (SCP) of hatchlings given either INA-bacteria-fed or bacteria-free prey (Drosophila melanogaster). Spiders that had eaten INA-bacteria-fed flies showed higher SCPs than those fed on bacteria-free flies. Through feeding, INA bacteria in the prey reduce the cold hardiness of spiders. This fact should be taken into account before using INA agents as a means of pest management.     

Reductive dechlorination of non-ortho substituted polychlorinated biphenyls by ultraviolet irradiation in alkaline 2-propanol

The photodechlorination pathways of 3,3′,4,5,5′-pentachlorobiphenyl (3,3′,4,5,5′-PentaCB) and the related lower polychlorinated biphenyl congeners irradiated at 254 nm in alkaline 2-propanol were elucidated. Steric effect is the most important factor for controlling the dechlorination pattern of these substrates. Electronic effect also influences the photoreactivity of chlorine substituents.     

Levels of PCDDs, PCDFs and Co-PCBs in human milk in Saitama, Japan, and epidemiological research

From 1998 to 2000, the dioxin levels were measured in the milk of 299 mothers who lived in Saitama prefecture, Japan. Factors that influenced the dioxin levels were investigated based on a questionnaire given to the milk donors at that time. It was found that the dioxin levels in the milk of the mothers who smoked were lower than those of non-smokers, and the dioxin levels were generally low in the mothers who were heavy smokers. The average dioxin levels in the milk of mothers who had been breast-fed were higher than those given formula, and there was a significant difference in the dioxin congeners. It was also found that the dioxin levels in milk of the women who regularly consumed fish and shellfish were generally higher. There was a strong correlation between summation operator TEQ and PCB126. The data suggested that PCB126 could be a useful indicator for the simplified analysis of dioxin in human milk.     

Basic Research on the Emission of Polycyclic Aromatic Hydrocarbons caused by Waste Incineration

The emission of polycyclic aromatic hydrocarbons (PAH) caused by municipal waste incineration varies according to waste composition and operating parameters such as furnace temperature and excess air. However, to obtain a sample sufficient to measure the emission of PAH at trace levels, it is necessary to operate the incinerator for many hours. Since during these lengthy periods it has not always been possible to maintain stable conditions, it is very difficult to determine the relationship between the emission and waste composition.

In our basic research, therefore, we used municipal waste with an artificially regulated composition for our combustion experiments, and by using an experimental Incinerator we examined the emission behavior of PAH with respect to changes in waste composition and combustion conditions. The following facts were revealed by the results: ? The PAH found in the flue gas were predominantly the more volatile compounds.

? When municipal waste was incinerated at over 850 °C, the concentration of PAH in the flue gas increased rapidly as the proportion of plastics in the waste increased from 0 to 24 percent.

? The elimination of plastics from municipal waste by separate collection and the improvement of combustion conditions can effectively diminish the emission of PAH.