Analysis and optimization on the biodegradable plate making process parameters using RSM-based Box–Behnken Design method

Journal of Material Cycles and Waste Management - The present research work focused on fabricating Biodegradable Plate (BD plate) composed of rice husk ash, bagasse and corn starch which is...     

Laboratory and Field Assessment of Arsenic Testing Field Kits in Bangladesh and West Bengal, India

High concentrations of arsenic in ground waters in West Bengal and Bangladeshhave become a major cause for concern in recent years. Given the enormity and the severity of the problemof arsenic poisoning, a task of evaluating the commercially available arsenic detection field kits for their capabilities was undertaken. In the light of the findings, generic specificationswere recommended which could form the basis forindigenous manufacture of these kits in the arsenic affected countries. This article presents the results of the laboratory and fieldevaluation conducted in Bangladesh and West Bengalof five arsenic testing field kits. The salient features of the kits, their merits and limitationshave been brought out. Based on the criteria of kitdesign, quality of chemicals used, colourcomparator charts, detection range, time required for analysis, cost etc., a comparative ranking ofthe kits has been made to facilitate the choice of the kit to meet specific requirements.     

Seasonal variations in physico-chemical characteristics of River Yamuna in Haryana and its ecological best-designated use

Various physico-chemical characteristics of the River Yamuna flowing in Haryana through Delhi were studied in the summer (April 1998) and winter (Jan.-Feb. 1999). Ecological parameters like dissolved oxygen (DO), pH, nitrate (NO3-), sulfate (SO4(2-)), and phosphate (PO4(3-)), were analyzed and compared with standard permissible limits to assess the best-designated use of the river water for various purposes. The river in Delhi upstream was of better quality whereas the Delhi downstream stretch was polluted as indicated by very low DO and high total dissolved solids (TDS), electric conductivity (EC), total hardness, Na+, K+, Cl-, F- and SO4(2-). The differences in various parameters were statistically significant (p < 0.01) when compared for the Delhi upstream and downstream stretches of the river, particularly in summer. DO and TDS were found to be two important parameters, which showed strong correlation with several other parameters and hence can serve as good indices of river water quality. The river tended to recover from the pollution stress after flowing through a distance of about 80 km downstream of Delhi.     

Intra-monsoonal variation of zooplankton population in the Sundarbans Estuarine System,India

The present study was conducted during July 2013 (early phase of monsoon or EM) and September 2013 (later phase of monsoon or LM) to ascertain the intra-monsoonal variation on zooplankton, by selecting 15 study stations in the river Saptamukhi, one of the main estuaries in the Sundarbans Estuarine System (SES). In 2013, SES experienced an unusually high monsoonal rainfall also exacerbated by cloud burst event at Himalayan region (upper stretches of SES) which tremendously increased the river runoff. The present work was aimed to decipher the effect of this unusual precipitation during the monsoon season on zooplankton assemblages along with different hydrological parameters. The abundance of zooplankton was recorded as lower during EM compared to LM. Altogether, 56 zooplankton taxa were identified with copepods forming the predominant population. Thirty-three copepod species were reported with 25 calanoid species forming the bulk of the biomass followed by 5 and 3 species of cyclopoids and harpacticoid, respectively. A combination of multivariate cluster analysis, biotic indices, and canonical correspondence analysis revealed noticeable alterations in the zooplankton community structure across the spatio-temporal scale. Furthermore, significant intra-monsoonal changes in zooplankton population correlated with several hydrological parameters were clearly noticed. Paracalanus parvus, Bestiolina similis and Oithona similis were observed to be the most dominant copepod species in both sampling periods. The result of the present study provides new insight on estuarine zooplankton community after unusual rainfall during monsoon season, and provides further evidence to support the conservation and management of the SES ecosystem.     

Shell repair in Nautilus macromphalus

The shell of Nautilus macromphalus, like that of N. pompilius, consists of an outer spherulitic-prismatic layer, a middle nacreous layer, and an inner semiprismatic layer. No periostracum was observed. When an area of shell 2 cmx2 cm over the living chamber was removed experimentally, it was replaced by shell of normal structure. Regeneration required 45 days. Observations of regenerated shell made with a scanning electron microscope showed that the spherulitic portion of the spherulitic-prismatic layer was formed from crystal grains that developed into spherulites. The nacreous layer was formed by the deposition of stacks of hexagonal crystals which, through lateral growth, made contact with crystals in adjoining stacks and formed continuous layers 1 crystal in thickness. The deposition of all the shell layers during regeneration was probably accomplished by a single mantle region rather than by different mantle regions as in normal shell growth.     

Wastewater management for hazardous chemicals ‐ disposal of ammonium perchlorate wastes from propellant production for space vehicles

An attempt to depict the wastewater treatment system for the production of ammonium perchlorate, a component of solid propellant used in space vehicles, has been made. The waste‐water management system uses solar ponds and seawater dilution for the retention and disposal of the undesirable constituents of the wastewater. The details of the wastewater generation and its treatment are highlighted in this paper.     

Biosynthesis and effects of copper nanoparticles on plants

Copper nanoparticles have improved properties compared to the bulk copper material. Copper nanoparticles indeed find applications in gas sensors, heat transfer fluids, catalysis, solar energy and batteries. Antibacterial and antifungal activities of copper nanoparticles find applications in the agriculture and healthcare sectors. Nonetheless, careless use of copper nanoparticles may cause environmental pollution and health effects. Here we review the biosynthesis of copper nanoparticles using plant materials, named phytosynthesis, and micro-organisms. We also discuss the effect of copper nanoparticles on crops and pathogenic micro-organisms. Copper nanoparticles varying in sizes from 5 to 295 nm have been synthesized using leaf extracts and latex from plants, and using bacteria and fungi. Biosynthesized copper nanoparticles show good antimicrobial activity inhibiting the growth of pathogenic bacteria and pathogenic fungi. Copper nanoparticles enhance the germination and growth of some plants at lower concentrations, whereas high concentrations result in retarded growth.     

Groundwater purification by membrane technology

Hyperfiltration and nanofiltration membranes were tested with different water matrices for the removal of excess fluoride from underground water. Initially, the experiments were done with synthetic samples prepared by adding known amounts of sodium fluoride and calcium chloride in distilled water. The effect of feed water composition, pH, temperature of feed water, operating pressure, and feed water flow rate on separation efficiency of both types of membrane was studied by varying one parameter at a time and keeping all other parameters constant. Thus, the optimum operating conditions for the process were determined and after that ground water samples collected from three villages of district Gurgaon, Haryana, India (Farukhnagar, Wazirpur, and Mevka) were treated under optimum operational conditions. The mass transfer coefficient and membrane parameters were estimated for each data point using two-parameter model (Film theory and Solution-diffusion model) to study the concentration polarization on membrane surface. The nanofiltration membrane showed high percentage rejection of bivalent ions when compared to monovalent ions in a binary system. But in multicomponent system, when fluoride and calcium coexisted, the removal of fluoride was comparable to calcium removal because of the low solubility product of calcium fluoride. The results with RO membrane revealed that it removes practically all the ions present in water at high pressure, which need to be passed through a lime column to remineralize the water, to make it suitable for drinking purposes, whereas by running the system at low pressure which will further reduce the cost of operation, rejection percentage goes down to get permeate of required quality.