Application of cryofocusing hydride generation and atomic fluorescence detection for dissolved mercury species determination in natural water samples

The concentration levels of mercury (Hg) species in natural water samples are usually low. Consequently, accurate analysis with low detection limits is still a major problem. In this work, a method was applied for the simultaneous direct determination of dissolved mercury species in water samples by on-line hydride generation (HG), cryogenic trapping (CT), gas chromatography (GC) and detection by atomic fluorescence spectrometry (AFS). The suitability of the method for real samples with different organic matter and chloride contents was evaluated by recovery experiments in synthetic and natural spiked water samples. The HG method was compared with other current available methods for mercury analysis with respect to the different fraction of mercury analysed, i.e. 'reactive', 'reducible' or total. HG derivatization and SnCl2 reduction (with and without previous oxidation with BrCl) were applied to synthetic and natural (spiked and non-spiked) water samples. The influence of chloride and dissolved organic matter concentrations was studied. The results suggest that the HG procedure is suitable for the simultaneous determination of Hg2+ and MeHg+ in surface water samples. Inorganic mercury analysed by HG (i.e. reducible) is close to the total inorganic mercury.     

Trihalomethanes in Drinking Water of Greater Québec Region (Canada): Occurrence, Variations and Modelling

The levels of trihalomethanes (THMs) – the main species of by-product from water chlorination – were monitored in thedistribution systems of the five major drinking water utilitiesof the greater area of Québec City in order to investigate andmodel their occurrence on a spatial and seasonal basis. Data forTHMs and other water quality and operational parametersassociated with their formation were generated through a 16 monthsampling program involving several sites representing variablewater residence times, from the plant to the system extremity.The results demonstrate that the differences in measured THMlevels between the five utilities are mainly due to the variablequality of raw waters, the type of water treatment process beingused and the type and levels of applied disinfectant. Dependingon the utility, average THM levels were from 1.3 to 2.5 timeshigher in the system extremities than in the water leaving thetreatment plant. Also, average levels of THMs measured in summerat the distribution system extremities were, depending on theutility, from 2.5 to 5 times higher than the average levelsmeasured in winter. The seasonal differences were found to besignificantly greater than those observed by others in waterutilities in the United States and Europe and are explained inlarge part by the considerable changes, over the year, in thequality and temperature of surface waters in Southern Québec. Forthe five utilities under study, multivariate regression modelswere developed in order to predict spatial and seasonalvariations of THMs. Both residual chlorine demand and temperaturewere found to be better, statistically, as predictors for THMoccurrence. The usefulness of the developed models for routineand long term water quality management, as well as for assessmentof human exposure to THMs, are also discussed.     

Abundance patterns and foraging activity of ant communities in abandoned,organic and commercial apple orchards in Northern California

The abundance patterns of ant communities were monitored with pitfall traps during 14 weeks in four northern California, dry farmed, apple orchards: an abandoned orchard undisturbed for 25 years, two ‘organically’ managed orchards, one with a cover crop of bell beans (Vicia faba) and grasses and the other kept clean of cover by discing, and a ‘commercial’ clean cultivated orchard sprayed with organophosphate insecticides. Six species of ants coexisted in the abandoned orchard, whereas only two species were found in the managed orchards. In both the organic and sprayed, clean cultivated systems, ants were more abundant in the orchard edges than in the vegetation-free centers. This trend was not apparent in the abandoned or organic cover orchards, where plant diversity in the center was similar to that of the edges. Ant predation on potato tuberworm larvae, Phthorimaea operculella, artificially placed on the orchard floor, declined with the intensity of management and vegetational simplication. A higher incidence of larval removal occurred in the edges than in the centers of the clean cultivated orchards. No noticeable populations of ants were detected on the trees in any of the orchards. Increased vegetational diversity and lack of disturbance appeared to affect ant locomotory activity and foraging efficiency by creating preferred sheltering and feeding sites.     

Engaging Economic Development Agencies in Environmental Protection: the case for embedded autonomy

This article examines the role of economic development agencies in strengthening the environmental performance of industry within rapidly industrialising East Asian economies. Three case-study examples are considered, namely, the role of the Industrial Development Board in reducing industrial pollution in Taiwan, pollution control in the palm oil industry in Malaysia, and the role of the Economic Development Board in influencing environmental performance of industry in Singapore. The concept of embedded autonomy is developed to consider the ways in which agencies of economic development can work with firms and industries while simultaneously remaining autonomous from these firms with respect to setting and enforcing performance standards. The three cases suggest that a form of policy integration that more directly integrates economic and environmental goals within agencies of economic development may be feasible, but only where there exists a strong autonomous government bureaucracy and where there is strong societal commitment to improving the environmental performance of industry.     

NITROGEN AND ORGANIC MATTER LOSSES IN NO‐TILL CORN CROPPING SYSTEMS1

ABSTRACT: Intensive cropping systems based on mechanical movement of soil have induced land degradation in most agricultural areas due to soil erosion and soil fertility losses. Thus, farmers have been increasing fertilization rates to maintain an economically competitive crop yield. This practice has resulted in water quality degradation and lake eutrophication in many agricultural watersheds. Research was conducted in the Patzcuaro watershed in central Mexico to develop appropriate technology that prevents nonpoint source pollution from fertilizers. Organic matter (OM) and nitrogen (N) losses in runoff and nitrate (NO₃‐N) percolation in Andisols with corn under conventional till (CT) and no‐till (NT) treatments using variable percentages of crop residue as soil cover were investigated for steep‐slope agriculture. USLE type runoff plots were used to collect water runoff, while suction tubes with porous caps at 30, 60, and 90 cm depth were used to sample soil water solutes for NO₃‐N analyses. Results indicated a significant reduction of N and OM losses in runoff as residue cover increased in the NT treatments. Inorganic N in runoff was 25 kg/ha for NT without residue cover (NT‐0) and 6 kg/ha for the NT with 100 percent residue cover (NT‐100). Organic matter losses in runoff were 157 and 24 kg/ha for the NT‐0 and NT‐100 treatments, respectively. Nitrate‐N percolation was evident in CT and NT with 100 percent residue cover (NT‐100). However, NT‐100 had higher NO₃‐N concentration at the root zone, suggesting the possibility of reducing fertilization rates with the use of NT treatments.     

Bacterial toxicity testing and antibacterial activity of parabens

Parabens are used because of their antimicrobial effects, yet they have multiple adverse effects. The aim of this work was to evaluate the bactericidal activity and bacterial toxicity of the most common parabens: methylparaben, ethylparaben, propylparaben, isopropylparaben, butylparaben, isobutylparaben and phenylparaben. The bactericidal action was evaluated by means of the dilution-neutralization method against Escherichia coli and Staphylococcus aureus, and the biotest of inhibition of growth of E. coli was applied for the bacterial toxicity assay. Bactericidal concentrations were reached only for propylparaben, butylparaben and isobutylparaben. The toxicity study showed methylparaben to be the least toxic, whereas the most toxic one was phenylparaben. It can be concluded that the disinfectant activity of the parabens studied is insignificant against S. aureus and E. coli. Acute toxicity is very low, and the inhibitory effect is weak. Our results provide information about the risk–benefit balance of parabens use.     

Antioxidant activity and enzyme inhibitory potential of Euphorbia resinifera and E. officinarum honeys from Morocco and plant aqueous extracts

Natural products may be applied in a wide range of domains, from agriculture to food and pharmaceutical industries. In this study, the antioxidant properties and the capacity to inhibit some enzymatic activities of Euphorbia resinifera and Euphorbia officinarum aqueous extracts and honeys were assessed. The physicochemical characteristics were also evaluated. Higher amounts of iron, copper and aluminium were detected in E. officinarum honey, which may indicate environmental pollution around the beehives or inadequate storage of honey samples. This honey sample showed higher amounts of total phenols and better capacity for scavenging superoxide anion free radicals and DPPH free radicals as compared with E. resinifera honey, but poorer capacity for inhibiting lipoxygenase, acetylcholinesterase, tyrosinase and xanthine oxidase. The ratio plant mass:solvent volume (1:100) and extraction time (1 - 2 h) were associated with higher total phenols and better antioxidant activities and lipoxygenase, acetylcholinesterase and tyrosinase inhibitory activities, regardless of the plant species. The aqueous extracts had systematically higher in vitro activities than the respective honey samples.

     

Concentrations of disinfection by-products in swimming pool following modifications of the water treatment process: An exploratory study

The formation and concentration of disinfection by-products (DBPs) in pool water and the ambient air vary according to the type of water treatment process used. This exploratory study was aimed at investigating the short-term impact of modifications of the water treatment process on traditional DBP levels (e.g., trihalomethanes (THMs), chloramines) and emerging DBPs (e.g., Halonitromethanes, Haloketones, NDMA) in swimming pool water and/or air. A sampling program was carried to understand the impact of the following changes made successively to the standard water treatment process: activation of ultraviolet (UV) photoreactor, halt of air stripping with continuation of air extraction from the buffer tank, halt of air stripping and suppression of air extraction from the buffer tank, suppression of the polyaluminium silicate sulfate (PASS) coagulant. UV caused a high increase of Halonitromethanes (8.4 fold), Haloketones (2.1 fold), and THMs in the water (1.7 fold) and, of THMs in the air (1.6 fold) and contributed to reducing the level of chloramines in the air (1.6 fold) and NDMA in the water (2.1 fold). The results highlight the positive impact of air stripping in reducing volatile contaminants. The PASS did not change the presence of DBPs, except for the THMs, which decrease slightly with the use of this coagulant. This study shows that modifications affecting the water treatment process can rapidly produce important and variable impacts on DBP levels in water and air and suggests that implementation of any water treatment process to reduce DBP levels should take into account the specific context of each swimming pool.