Prenatal diagnosis of congenital cystic adenomatoid malformation of the lung by fetal lung biopsy

A case of type III congenital cystic adenomatoid malformation of the lung was successfully diagnosed prenatally by fetal lung biopsy. We performed this procedure at 22 weeks of gestation, using a biopsy gun system under ultrasound guidance. The pregnancy was undisturbed by the procedure but as the condition was incompatible with life, an abortion was performed. The diagnosis was confirmed at post-mortem examination. Fetal lung biopsy appears to be a useful method for prenatal diagnosis of fetal lung disorders.     

Current status and research on E-waste issues in Asia

Rapid economic growth in Asia and the increasing transboundary movement of secondary resources will increasingly require both 3R endeavors (reduce, reuse, recycle) in each country and appropriate control of international material cycles. Recently, managing electrical and electronic waste (E-waste) has become an important target for domestic and international material cycles from the viewpoints of environmental preservation and resource utilization efficiency. To understand the current status of E-waste issues in the context of international material cycles and to discuss the future tasks related to achieving 3R in the region, we organized the National Institute for Environmental Studies (NIES) E-waste Workshop in December 2004. This article reviews past studies on E-waste and briefly describes the topics presented and discussions held at the workshop. The topics at the workshop included E-waste generation, recycling systems, international trade, and environmental impacts. In addition, we discussed various issues such as terminology, current environmental concerns, and possible solutions. Transboundary shipments of E-waste should be conducted taking into consideration the concept of sustainable development. The direction of future research and possible collaborations are also discussed.     

Evaluation of a recycling process for printed circuit board by physical separation and heat treatment

Printed circuit boards (PCBs) from discarded personal computer (PC) and hard disk drive were crushed by explosion in water or mechanical comminution in order to disintegrate the attached parts. More parts were stripped from PCB of PC, composed of epoxy resin; than from PCB of household appliance, composed of phenol resin.In an attempt to raise the copper grade of PCB by removing other components, a carbonization treatment was investigated. The crushed PCB without surface-mounted parts was carbonized under a nitrogen atmosphere at 873–1073 K. After screening, the char was classified by size into oversized pieces, undersized pieces and powder. The copper foil and glass fiber pieces were liberated and collected in undersized fraction. The copper foil was liberated easily from glass fiber by stamping treatment.As one of the mounted parts, the multi-layered ceramic capacitors (MLCCs), which contain nickel, were carbonized at 873 K. The magnetic separation is carried out at a lower magnetic field strength of 0.1 T and then at 0.8 T. In the +0.5 mm size fraction the nickel grade in magnetic product was increased from 0.16% to 6.7% and the nickel recovery is 74%.The other useful mounted parts are tantalum capacitors. The tantalum capacitors were collected from mounted parts. The tantalum-sintered bodies were separated from molded resins by heat treatment at 723–773 K in air atmosphere and screening of 0.5 mm. Silica was removed and 70% of tantalum grade was obtained after more than 823 K heating and separation.Next, the evaluation of Cu recycling in PCB is estimated. Energy consumption of new process increased and the treatment cost becomes 3 times higher comparing the conventional process, while the environmental burden of new process decreased comparing conventional process.The nickel recovery process in fine ground particles increased energy and energy cost comparing those of the conventional process. However, the environmental burden decreased than the conventional one.The process for recovering tantalum used more heat for the treatment and therefore the energy consumption increased by 50%, when comparing with conventional process. However, the market price for tantalum is very large; the profit for tantalum recovery is added. Also the environmental burden decreased by the recycling of tantalum recovery. Therefore, the tantalum recovery is very important step in the PCB recycling. If there is no tantalum, the consumed energy and treatment cost increase in the new process, though the environmental burden decreases.     

Remediation of cadmium-contaminated paddy soils by washing with chemicals: effect of soil washing on cadmium uptake by soybean

We conducted a pot experiment to evaluate the effect of soil washing with CaCl(2) on Cd absorption by two soybean cultivars. The results were as follows: (1) Soybean growth was not significantly different in washed and unwashed soils, but the seed Cd concentration for both cultivars decreased significantly, up to 25%, in the washed soils compared with the unwashed soils. (2) In the washed soils, the Cd concentration in the soil solution indicated an obviously lower value from sowing to the flowering stage; however, the change in Cd speciation was not evident in the CaCl(2)-washed soil solution. Consequently, the effect of soil washing using CaCl(2) on Cd-contaminated paddy soils can be expected to continue after a CaCl(2)-washed paddy field is converted to an upland field.     

松嫩平原西部碱尘气溶胶的时段变化及其气候影响因素分析

利用耦合等离子体发射光谱测试技术(ICP-AES)对松嫩平原西部2003年7月到2004年5月间获得的大气总悬浮颗粒物(TSP)样品进行了元素分析,并结合气象资料和TSP质量浓度,初步确定了碱尘活动年际内的演变规律及其主要控制因素.结果表明,TSP质量浓度的高峰时段是早春,其元素总体浓度亦高于其它时段,其中Na元素浓度具有明显的高值,表明碱尘在该时段为TSP的主要成分;晚春时段区域沙尘影响加强,很难监测本地碱尘活动;夏季,碱尘的3种重要元素(Na、Ca、K)含量增加,表明夏季有碱尘活动,与TSP浓度偏高吻合;秋季,碱尘和区域沙尘的活动均减弱.影响碱尘活动的气候因子主要是风力、降水量、温度、日照和湿度,但不同时段其主导作用不同.     

Impact of COVID-19 type events on the economy and climate under the stochastic DICE model

Environmental Economics and Policy Studies - The classical DICE model is a widely accepted integrated assessment model for the joint modeling of economic and climate systems, where all model state...     

A preliminary categorization of end-of-life electrical and electronic equipment as secondary metal resources

End-of-life electrical and electronic equipment (EEE) has recently received attention as a secondary source of metals. This study examined characteristics of end-of-life EEE as secondary metal resources to consider efficient collection and metal recovery systems according to the specific metals and types of EEE. We constructed an analogy between natural resource development and metal recovery from end-of-life EEE and found that metal content and total annual amount of metal contained in each type of end-of-life EEE should be considered in secondary resource development, as well as the collectability of the end-of-life products. We then categorized 21 EEE types into five groups and discussed their potential as secondary metal resources. Refrigerators, washing machines, air conditioners, and CRT TVs were evaluated as the most important sources of common metals, and personal computers, mobile phones, and video games were evaluated as the most important sources of precious metals. Several types of small digital equipment were also identified as important sources of precious metals; however, mid-size information and communication technology (ICT) equipment (e.g., printers and fax machines) and audio/video equipment were shown to be more important as a source of a variety of less common metals. The physical collectability of each type of EEE was roughly characterized by unit size and number of end-of-life products generated annually. Current collection systems in Japan were examined and potentially appropriate collection methods were suggested for equipment types that currently have no specific collection systems in Japan, particularly for video games, notebook computers, and mid-size ICT and audio/video equipment.     

Estimation of thyroid doses and health risks resulting from the intake of radioactive iodine in foods and drinking water by the citizens of Tokyo after the Fukushima nuclear accident

The release of radioactive materials from the Fukushima nuclear power plant after the Great East Japan Earthquake on 11 March 2011 poses health risks. In this study, the intake of iodine 131 (I-131) in drinking water and foods (milk, dairy products, and vegetables) by citizens of Tokyo was estimated. The effects of countermeasures (restrictions on the distribution of foods and the distribution of bottled water for infants) on reducing intake were also evaluated. The average thyroid equivalent doses without countermeasures from 21 March 2011 were 0.42 mSv in adults, 1.49 mSv in children, and 2.08 mSv in infants. Those with countermeasures were 0.28, 0.97, and 1.14 mSv respectively, reductions of 33%, 35%, and 45%. Drinking water contributed more to intake by adults and children than foods. The intake of I-131 within the first 2 weeks was more than 80% of the estimated intake, owing to its short half-life, indicating that rapid countermeasures are important in reducing intake. The average risks of cancer incidence and mortality due to I-131 for infants were estimated to be 3 × 10⁻⁵ and 0.2 × 10⁻⁵, respectively, lower than the annual risks of traffic accidents, naturally occurring radioactive material (potassium 40), and environmental pollutants such as diesel exhaust particles.     

Quantitative analysis of perfluorinated chemicals in media for in vitro fertilization and related samples

The actual standard in vitro fertilization (IVF) protocol recommends an overnight gamete co-incubation. All of the culture media used for human IVF are supplemented with serum or albumin. In the present study, we determined the concentrations of perfluorinated chemicals (PFCs) in IVF media (IVFM) and related samples by liquid chromatography with tandem mass spectrometry (LC/MS/MS). The results indicated that the concentrations of PFOS and PFOA in the protein source were higher than those in the IVFM samples. Compared with human plasma concentrations of PFCs, PFCs in all of the IVFM samples, such as PFBS, PFHxS and PFOA, were either not detected or present at only trace levels, even when protein source was added. LC/MS/MS could be used to determine PFCs in IVFM samples in future studies of the effects of PFC exposure on intrauterine insemination.