The fetal behavioural states: An ultrasonic study

In order to accurately detect the fetal behavioural state, we simultaneously measured fetal heart rate and multiple fetal activities in 27 healthy pregnant women at 38 to 40 weeks of gestation. We ultrasonically identified gross body movements, breathing movements and micturition. Analysis of fetal heart rate allowed us to distinguish two different patterns of fetal behaviour: active and quiet phases. The frequency distribution of the analysed fetal events was significantly different in these two phases. These data suggest that a complete biophysical profile of the fetus is effective in differentiating behavioural states and may improve the predictive accuracy of fetal heart rate analysis alone.     

Elemental characterization of PM10, PM2.5 and PM1 in the town of Genoa (Italy)

The particulate matter (PM) concentration and composition, the PM10, PM2.5, PM1 fractions, were studied in the urban area of Genoa, a coastal town in the northwest of Italy. Two instruments, the continuous monitor TEOM and the sequential sampler PARTISOL, were operated almost continuously on the same site from July 2001 to September 2004. Samples collected by PARTISOL were weighted to obtain PM concentration and then analysed by PIXE (particle induced X-ray emission) and by ED-XRF (energy dispersion X-ray fluorescence), obtaining concentrations for elements from Na to Pb. Some of the filters used in the TEOM microbalance were analysed by ED-XRF to calculate Pb concentration values averaged over 7-30 d periods.     

One-year study of the elemental composition and source apportionment of PM10 aerosols in Florence, Italy

An extensive investigation was carried out for the characterisation of the air particulate composition in Florence. The aim was to determine the aerosol elemental concentrations, as well as to identify pollution sources. For our investigation, the external Particle-Induced X-Ray Emission-Particle-Induced gamma-Ray Emission beam facility of the Istituto Nazionale di Fisica Nucleare, Van de Graaff accelerator at the Physics Department of the Florence University was used. We report the results of the analysis of a long temporal series (approximately 1 yr) of PM10 particulate samples, collected on Millipore filters on a daily basis in three different sites (characterised by different urban settings). Daily concentrations of more than 20 elements were detected. The long sampling period (approximately 1 yr) allowed a comparison with the air quality recommended values and the identification of seasonal variations. Four main sources (traffic, oil-combustion, soil-dust, and wind transported sea-salt) were extracted with the help of Principal Component Analysis (PCA). An absolute PCA showed traffic to be the major source both in the high traffic site and in the urban background site.     

Receiver sex differences in visual response to dynamic motion signals in Sceloporus lizards

Visual signal properties often vary greatly between and within individuals in a variety of social contexts. While it is widely known that visual displays emitted by senders can exhibit great variation in efficacy and content, far less is understood whether and how receivers vary in the ability to respond to variability in signal properties, such as motion. Here, we tested for receiver sex differences in visual response latency to motion signals in Sceloporus undulatus lizards. We used a moving robotic lizard model as a visual stimulus to assay response latency in male and female lizards. We measured visual reaction times to slow and fast, up-and-down motions, characteristic of territorial and courtship male motion displays, respectively. We found sex differences in response latency to the two different displays. Specifically, male lizards were faster than females at responding to slow motion produced by the robotic lizard, while female lizards were faster than males at responding to fast motion. These results demonstrate that dynamic visual signals that vary temporally under different social contexts can differ in eliciting a visual response from each sex. Our study highlights that physical differences in dynamic and complex visual signals exhibited during different social contexts (i.e., territorial and courtship contexts) can closely match sex differences in visual responses.     

Elemental Composition of Urban Aerosol Collected in Florence, Italy

An extensive investigation is in progress aiming at the characterisation of the air particulate composition in Florence. For our investigation, we use the external PIXE-PIGE beam facility of the I.N.F.N. Van de Graaff accelerator at the Physics Department of the Florence University. In order to gather information on both the longer- and shorter-time trends of the aerosol elemental composition, we are analysing both long temporal series (about 1 year) of 24-h Millipore filters collected by the health authorities in 3 different sites, and filters collected simultaneously in two of the above sites for about one month, by two streakers with one-hour resolution, providing size fractionation between particle size smaller than 2.5 µm and from 2.5 µm to 10 µm. The streakers sampling period includes two days during which the Municipality of Florence has banned the circulation of non-catalytic cars, due to the increase of NO₂ above the "recommended safety values". We present here the first obtained results for the sampling site located near a heavy traffic road.     

Synthesis and characterization of highly dispersed bimetallic Au-Rh nanoparticles supported on titanate nanotubes for CO oxidation reaction at low temperature

Environmental Science and Pollution Research - Low-temperature CO oxidation was carried out by using rhodium incorporated into titanate nanotubes (Rh/NTs) prepared by the sol-gel and hydrothermal...     

A comparative assessment of contaminants in fish from four resacas of the Texas, USA-Tamaulipas, Mexico border region

A recent survey of contaminant information for the Lower Rio Grande Valley (LRGV), Texas, has shown that little is known about contaminants and their impacts on biota of resacas (oxbows) along the US-Mexico border. In 1996, fish were collected from four resacas in the Texas-Tamaulipas border region to assess contaminant loadings and their impacts on fish and birds. Tissue residue concentrations in fish were analyzed and also compared to two histopathological bioindicators of unhealthy environmental conditions. Of the organochlorine insecticides measured, DDE was the most common and was present at relatively high concentrations (10 microg/g w/w) at some sites. DDE concentrations were nearly 20 times greater in fish from resacas in Texas than from resacas in Tamaulipas, although the limited sample sizes obtained precluded statistical comparisons. DDE concentrations in fish from the two Texas resacas were also greater than those reported in fish from nearby areas during the 1980s and 1990s. Most trace element concentrations were similar among resacas from Texas and Tamaulipas. Arsenic, however, was two to six times greater in fish from a downtown resaca in Matamoros than in fish from other resacas in Tamaulipas and Texas. The bioindicators, pigment accumulation, and macrophage aggregates (MAs), in general, reflected the contamination indicated by the tissue residues for each site. Overall, it appears that some resacas of the US-Mexico border region are contaminant sinks and could pose potential health or reproductive problems for fish and wildlife, and humans that consume fish from those sites.     

4-hours resolution data to study PM10 in a “hot spot” area in Europe

Nowadays, high-time resolved aerosol studies are mandatory to better understand atmospheric processes, such as formation, removal, transport, deposition or chemical reactions. This work focuses on PM10 physical and chemical characterisation with high-time resolution: elements (from Na to Pb), ions and OC/EC fractions concentration were determined during two weeks in summer and two in winter 2006 with 4-hours resolution. Further measurements aimed at hourly elemental characterisation of fine and coarse fractions and at the determination of particles number concentration in the 0.25-32 microm size range in 31 bins. The chemical mass closure was carried out in both seasons, enhancing intra-day differences in PM10 composition. In Milan, the highest contribution came from organic matter (34% and 33% in summer and winter, respectively); other important contributors were secondary inorganic compounds (16% and 24% in summer and winter, respectively) and, in summer, crustal matter (14%). Temporal trends showed strong variations in PM10 composition during contiguous time-slots and diurnal variations in different components contribution were identified. Moreover, peculiar phenomena, which would have hardly been detected with 24-hours samplings, were evidenced. Particles removal due to precipitations, aerosol local production and long range transport were studied in detail.     

Levels and chemical composition of PM in a city near a large Cu-smelter in Spain

A long-term series (2001-2008) of chemical analysis of atmospheric particulate matter (PM(10) and PM(2.5)) collected in the city of Huelva (SW Spain) is considered in this study. The impact of emission plumes from one of the largest Cu-smelters in the world on air quality in the city of Huelva is evidenced by the high daily and hourly levels of As, other potentially toxic elements (e.g. Cu, Zn, Cd, Se, Bi, and Pb) in particulate matter, as well as the high levels of some gaseous pollutants (NO(2) and SO(2)). Mean arsenic levels in the PM10 fraction were higher than the target value set by European Directive 2004/107/EC (6 ngAs m(-3)) for 1(st) January 2013. Hourly peak concentrations of As and other metals and elements (Zn, Cu, P and Se) analyzed by PIXE can reach maximum hourly levels as high as 326 ngAs m(-3), 506 ngZn m(-3), 345 ngCu m(-3), 778 ngP m(-3) and 12 ngSe m(-3). The contribution of Cu-smelter emissions to ambient PM is quantified on an annual basis in 2.0-6.7 μg m(-3) and 1.8-4.2 μg m(-3) for PM(10) and PM(2.5), respectively. High resolution outputs of the HYSPLIT dispersion model show the geographical distribution of the As ambient levels into the emission plume, suggesting that the working regime of the Cu-smelter factory and the sea breeze circulation are the main factors controlling the impact of the Cu-smelter on the air quality of the city. The results of this work improve our understanding of the behaviour of industrial emission plumes and their impact on air quality of a city, where the population might be exposed to very high ambient concentrations of toxic metals during a few hours.