Geochemical anomalies from bottom ash in a road construction--comparison of the leaching potential between an ash road and the surroundings

A study was performed between June 2001 and December 2004 with the primary objective of assessing long-term leaching from municipal solid waste incineration bottom ash in a test road construction in relation to a reference road made up of conventional materials and the natural geochemical conditions in the surroundings. The metal leaching from the test road and the reference road was compared with the natural weathering in the regional surroundings for three time scales: 16, 80 and 1000 years. The results show that Cu and Zn cause a geochemical anomaly from the test road compared with the surroundings. The leaching of Cu from the test road is initially high but will decline with time and will in the long term be exceeded by natural weathering. Zn on the other hand has low initial leaching, which will increase with time and will in the long term exceed that of the test road and the surroundings by a factor of 100-300. For the other metals studied, Al, Na, K and Mg, there is only very limited leaching over time and the potential accumulation will not exceed the background values in a 1000 years.     

Assessment of historical land-use changes for purposes of strategic planning--a case study in Laos

How can governments in developing countries act together with local people to promote sustainable forest land use? Based upon an initial review of man's use of natural resources in Southeast Asia over 100 years, an interdisciplinary approach to strategic planning based on interaction among stakeholders is outlined. A case study in a water catchment area in Laos, dominated by shifting cultivation, is used to test and illustrate the approach, which includes interviews with local people about historical events and socioeconomic and environmental conditions. The study also includes field point sampling, remote sensing, official records and a simulation tool (the Area Production Model), for verification, calibration and supplementation of the information provided by villagers. By presenting the consolidated data to the villagers and giving them opportunities to consider their landuse and explain discrepancies, and comment on the conclusions, a dialogue on land-use strategies was initiated.     

Rock matrix diffusivity determinations by in-situ electrical conductivity measurements

A fast method to determine rock matrix diffusion properties directly in the bedrock would be valuable in the investigation of a possible site for disposal of nuclear waste. An "effective diffusivity borehole log" would provide important information on the variability of this entity over the area studied. As opposed to traditional matrix diffusion laboratory experiments, electrical conductivity measurements are fast, inexpensive and also easy to carry out in-situ. In this study, electrical resistivity data from borehole logging, as well as from measurements on the actual core, is evaluated with the purpose of extracting matrix diffusivity data. The influence of migration of ions in the electrical double layer, which can be of great importance in low ionic strength pore water, is also considered in evaluating the in-situ data to accurately determine the effective pore diffusivity. The in-situ data compare fairly well to those measured in the rock core.     

工业化加工和家庭烹饪:三种备餐方法的环境效应评估

在当今的瑞典,食品的工业化加工代替传统的家庭制作的趋势越来越明显,公众担心由此可能增加的来自食品的环境影响.本文采用生命周期评估的方法,对三类食品--家庭制作的食品、半成品和即食成品的环境效应进行了定量的分析.结果表明:这些食品对环境的影响基本一致,即食成品消耗了最多的能源,而家庭制作的食品具有较高的排放量,引起富营养化作用和全球变暖;对环境的影响最大因素是农业,因为其30%的影响关系到能源,95%的影响关系到富营养化作用,工业、包装业、消费者家庭运输和食品制备方式对环境也具有明显的影响;加工业、家庭制作、包装业、废物处理过程中的原材料的消耗和能源效率是重要的因素,所以降低食品消费带来的环境影响,农业方面的改进是非常重要的,同时工业和家庭制作食品过程中的原材料利用也是非常重要的环节.     

The Expansion of Farm-Based Plantation Forestry in Vietnam

This study targets plantation forestry by farm households (small holders), which is increasing globally and most rapidly in China and Vietnam. By use of an interdisciplinary approach on three study sites in Vietnam, we examined the trends in farmers’ tree planting over time, the various pre-requisites for farm-based plantation forestry and its impact on rural people’s livelihood strategies, socio-economic status, income and security. The findings indicated a change from subsistence to cash-based household economy, diversification of farmers’ incomes and a transformation of the landscape from mainly natural forests, via deforestation and shifting cultivation, to a landscape dominated by farm-based plantations. The trend of transformation, over a period of some 30 years, towards cash crops and forestry was induced by a combination of policy, market, institutional, infrastructural and other conditions and the existence of professional farming communities, and was most rapid close to the industrial market.     

Screening life cycle assessment (LCA) of tomato ketchup: a case study

A screening life cycle assessment (LCA) of tomato ketchup has been carried out. The purpose was to identify ‘hot-spots', that is parts of the life-cycle that are important to the total environmental impact. The system investigated includes agricultural production, industrial refining, packaging, transportation, consumption and waste management. Energy use and emissions were quantified and some of the potential environmental effects assessed. Packaging and food processing were found to be hot-spots for many, but not all, of the impact categories investigated. For primary energy use, the storage time in a refrigerator (household phase) was found to be a critical parameter.     

Industrial processing versus home cooking: an environmental comparison between three ways to prepare a meal

Today there is a strong trend in Sweden for industrially processed meals to replace homemade meals. In the public debate this is often claimed to increase the environmental impact from foods. In the study presented in this article, we used life-cycle assessment to quantify the environmental impact of three meals: homemade, semiprepared, and ready-to-eat. The differences in environmental impact between the meals were small; the ready-to-eat meal used the most energy, whereas the homemade meal had higher emissions causing eutrophication and global warming. The dominating contributor to the environmental impact was agriculture, accounting for 30%, of the impact related to energy and 95% of that related to eutrophication. Industry, packaging, and consumer home transport and food preparation also contributed significantly. Important factors were raw material use, energy efficiency in industry and households, packaging, and residue treatment. To decrease the overall environmental impact of food consumption, improvements in agriculture are very important, together with raw-material use within industry and households.     

Government plans and farmers intentions: a study on forest land use planning in Vietnam

In 1998, the Vietnamese National Assembly approved a Five Million Hectare Reforestation Program, (5MHRP) 1998-2010. It would increase forest cover by some 45%, use barren hills, produce wood, and generate socioeconomic development. It would, however, also put demands on Vietnamese planning. Experiences from a former development project and two case studies from a commune and village are used as a basis for analyzing the planning system. The study describes the objectives and strategies of government and farmers in one commune and one village and analyzes how planning data influence scenarios on future development. Official planning data do not reflect reality but are derived through negotiations. In the commune and village studied, it would be difficult for the 5MHRP to materialize, as most of the forest land, officially not yet used, is actually used for food production. The approach and method used by the study offers alternatives to current planning practices.     

Comprehensive Study Regarding Greenhouse Gas Emission from Iron Ore Based Production at the Integrated Steel Plant SSAB Tunnplåt AB

During the years 2001–2002, a comprehensive study regarding CO₂ emissions related to the steel production for the integrated steel making production route, was carried out. The study was financed by SSAB and carried out by a research group with members from SSAB, MEFOS and LTU. The aim was to study the emissions from the existing system and how these could be influenced by process changes and by process modifications. The calculations were made using a global spreadsheet model for calculating the CO₂ emissions, developed from an existing Energy and Process Integration model of the same system. The calculated cases included the existing BF/BOF route as well as integration of other processes, e.g., an electric arc furnace, DR processes, COREX and a new future smelting reduction process concept (Sidcomet). All new existing alternative ore based process technologies would increase the specific CO₂ emission from the system. A technology transfer to scrap based metallurgy would significantly decrease the emission level, but is not feasible for SSAB, due to the future product mix and the structure of scrap availability. In a 5–20 year perspective, the existing steel making process route with the use of magnetite ore for pellet production has the lowest specific CO₂ emission. In a long-term perspective, 20–50 years, alternative process routes, e.g., based on H₂ and DRI, could be of interest. Studies on such changes are, however, big projects and should be carried out as joint European and/or international efforts.