Concentration of heavy metals in various children's herbal tea types and their correlations

This investigation was undertaken to determine the concentrations of cadmium, lead, mercury, zinc, copper and magnesium in six tea types used as children's tea. Six types of tea of different herbal composition used for children's consumption (T1, T2, T3, T4, T5 and T6) were analyzed in three subsequent collections. The analysis of cadmium showed that the concentration was very similar in all types of children's tea, ranging from 0.233 to 0.369 mg/kg. Lead concentrations were in the range of 0.340-1.564 mg/kg without any significant differences. The analysis of mercury detected very low concentration of this metal in all samples (0.002-0.004 mg/kg). In zinc, the values ranged from 36.633 to 71.711 mg/kg, with significant differences (p < 0.001) according to tea type. Copper concentration was 10.089-30.178 mg/kg with the highest value in T4. The concentration of magnesium was significantly higher in tea T1 and T2 (102.311 and 129.422 mg/kg) in comparison with other tea types where the level was 19.811-37.411 mg/kg. The maximum tolerable limit determined by Codex Alimentarius was not exceeded in any sample. In general, correlation analysis detected high positive correlation between cadmium and lead (r = 0.89), cadmium and mercury (r = 0.92) and between lead and mercury (r = 0.77).     

Utilization of Waste Lignin and Hydrolysate From Chromium Tanned Waste in Blends of Hot-Melt Extruded PVA-Starch

The demand for biodegradable plastic material is increasing worldwide. However, the cost remains high in comparison with common forms of plastic. Requirements comprise low cost, good UV-stability and mechanical properties, as well as solubility and water uptake lead to the preparation of multi-component polymer blends based on polyvinyl alcohol and starch in combination with waste products that are hard to utilize—waste lignin and hydrolysate extracted from chromium tanned waste. Surprisingly the addition of such waste products into PVA gives rise to blends with better biodegradability than commercial PVA in an aquatic aerobic environment with non-adapted activated sludge. These blends also exhibited greater solubility in the water and UV stability than commercial PVA. Tests on the processing properties of the blends (melt flow index, tensile strength and elongation at break of the films) as well as their mechanical properties showed that materials based on these blends might be applied in agriculture (for example as the systems for controlled-release pesticide or fertilizer) and, somewhat, in the packaging sector.     

Impact of urban anthropogenic pollution on seed production,morphological and biochemical characteristics of chamomile,Matricaria chamomila L.

It has been shown that the growth of technogenic dust pollution is accompanied by the accumulation of heavy metals in soil and plant phytomass, compared to the control, and that the morphometric and reproductive characteristics of Matricaria chamomila are most sensitive to the impact of these pollutants. The response of plants is manifested in increased variation in morphological characters, mobilization of compensatory protective biochemical mechanisms, and production of more viable seed progeny.     

Influence of Technological Process on Biodegradation of PVA/Waxy Starch Blends in an Aerobic and Anaerobic Environment

Improving biodegradability of PVA/starch blends is a reality already documented by a number of works. Admittedly, mechanical properties of products (for example, tensile strength) are somewhat worse, but suitable composition optimizing or chemical modifying of starch may eliminate the problem to a large degree. This work is an attempt to find another potential effect influencing biodegradability, that of technological procedure for producing films from these blends on an extruder. The procedure with a so-called pre-extrusion step (two-stage) and dry-blend (single-stage) produced blends of slightest differences in achieved biodegradability (virtually within limits of experimental error) in aerobic (76 vs. 79%) as well as anaerobic breakdown (48 vs. 52%). Conversely, morphological analysis exhibited superior homogeneity of films prepared by the two-stage process; their tensile strength was also higher.     

Mercury in fish tissues in the area of Malachov Hg-ore deposit (Slovakia)

Environmental Geochemistry and Health - The abandoned Malachov deposit belongs among the most important historic Hg deposits in the world. The soil, groundwater, surface water, plants, and animals...     

Measurement of Ambient Odors Using Dynamic Forced-Choice Triangle Olfactometer

Certain odor control regulations specify use of the Scentometer for ambient odor measurement. This evaluation is usually performed by a single individual who is surrounded by the odorous environment to be measured. A method is desired where an ambient odor sample can be evaluated by an adequate size panel in an odor-free atmosphere. A dynamic forced-choice triangle olfactometer was designed and constructed to measure ambient odors. Teflon bags of 18 liter capacity collect a sample within 2-3 minutes which includes pre-flushing the bag. The sample is evaluated by a dynamic olfactometer equipped with 5 dilution levels (81×, 27×, 9×, 3× and undiluted sample). Three sniffing ports are provided at each dilution level to present dynamically one diluted odor stimulus and two odor-free air blanks. Each panelist is required to indicate which port contains the odor. Evaluation of one sample is routinely completed by a panel of 9 within less than 15 minutes. The odor threshold value (ED₅₀) for the panel is calculated by use of a simple table derived statistically. No significant loss of odor was observed in sampling and in storage of rendering odors up to 48 hours. Bags were reusable after flushing with odor-free air. Reproducibility of log ED₅₀ values by the same panel was within a σ = 0.10 log₁₀. Agreement in evaluating duplicate field samples by two different panels was within the same limits. Under controlled laboratory conditions, a Scentometer reading of D/T = 2 was equivalent to an ED₅₀ = 4.8; and D/T = 7 was equal to ED₅₀ = 9.5.     

Soil Bed System for Control of Rendering Plant Odors

Biofilter technology has been applied recently to treating rendering odors. Soil beds are one class of biofilter but as yet have not been used for this application. Although wet scrubbers have been a traditional method of odor control, their capital and operating costs are impacting more severely. Soil bed systems are less expensive to install and operate.

A soil bed system was installed at a rendering plant in Arizona and has been in operation since September 1983. The soil bed treats 1100 m³/h (650 cfm) of cooker noncondensables with a surface area of 420 m²(4500 ft²). The pressure drop across the soil bed is 5 cm (2 in.) of water. Odor sensory testing with the MTRI forced-choice triangle dynamic olfactometer indicates an odor removal efficiency of 99.9 percent is obtained with the soil bed. Soil bed odor removal efficiency is equivalent to or superior than that for incineration or scrubbing of high intensity odors from the rendering process. Recent experience during this past winter indicates a soil bed is a viable method for operation in a northern climate with severe winter weather conditions. Also, monitoring of the leachate from a soil bed indicated no contamination.