Subsurface nutrient modelling using finite element model under Boro rice cropping system

Boro rice, an emerging low-risk crop variety of rice, cultivated using residual or stored water after Kharif season. To enhance the quality and production of rice, potassium (K) and phosphorus (P) are the common constituents of agricultural fertilizers. However, excess application of fertilizers causes leaching of nutrients and contaminates the groundwater system. Therefore, assessment and optimization of fertilizer dose are needed for better management of fertilizers. Towards this, the present study determines the path, persistence, and mobility of K and P under the Boro rice cropping system. The experimental site consisted of four plots having Boro rice with four different fertilizer doses of nitrogen (N), P, K viz. 100%, 75%, 50%, and 25% of the recommended dose. Disturbed soil samples were analysed for K and P from pre-sown land to tillering stage at 0–5, 5–10, 10–15, 15–30, 30–45, and 45–60 cm depths. Simultaneously, K and available P were also simulated in the subsurface soil layers through the HYDRUS-1D model. The statistical comparisons were made with RMSER, E, and PBIAS between the modelled values and laboratory-measured values. Although, the results showed that all the treatments considered had agreeable simulations for both K and P, the K simulations were found to be better as compared to P simulations except for 25% where P simulations outperformed K. The simulated concentration at all doses was found most appropriate when measured for the subsurface layers (up to 45 cm), while showed an underestimation in the bottom layers (45–60 cm) of soil.

     

Fast response measurements of the dispersion of nanoparticles in a vehicle wake and a street canyon

The distributions of nanoparticles (below 300 nm in diameter) change rapidly after emission from the tail pipe of a moving vehicle due to the influence of transformation processes. Information on this time scale is important for modelling of nanoparticle dispersion but is unknown because the sampling frequencies of available instruments are unable to capture these rapid processes. In this study, a fast response differential mobility spectrometer (Cambustion Instruments DMS500), originally designed to measure particle number distributions (PNDs) and concentrations in engine exhaust emissions, was deployed to measure particles in the 5–1000 nm size range at a sampling frequency of 10 Hz. This article presents results of two separate studies; one, measurements along the roadside in a Cambridge (UK) street canyon and, two, measurements at a fixed position (20 cm above road level), centrally, in the wake of a single moving diesel-engined car. The aims of the first measurements were to test the suitability and recommend optimum operating conditions of the DMS500 for ambient measurements. The aim of the second study was to investigate the time scale over which competing influences of dilution and transformation processes (nucleation, condensation and coagulation) affect the PNDs in the wake of a moving car. Results suggested that the effect of transformation processes was nearly complete within about 1 s after emission due to rapid dilution in the vehicle wake. Furthermore, roadside measurements in a street canyon showed that the time for traffic emissions to reach the roadside in calm wind conditions was about 45 ± 6 s. These observations suggest the hypothesis that the effects of transformation processes are generally complete by the time particles are observed at roadside and the total particle numbers can then be assumed as conserved. A corollary of this hypothesis is that complex transformation processes can be ignored when modelling the behaviour of nanoparticles in street canyons once the very near-exhaust processes are complete.     

Emission Inventory for an Industrial Area of India

The paper presents an emission inventory for Cochin, which is a highly industrialized area situated in the southern part of India. A proper emission inventory is very important for planning pollution control programmes, particularly in coastal sites like Cochin, where environmental situations are of growing concern owing to their typical meterorological conditions. In a systematic way the sources are broadly classified as point, line and area sources. The data on emissions from industries, fuel consumption for vehicular and domestic activities along with the respective emission factors are used for estimating the emissions. The study reveals that industrial sources are mainly responsible for emissions of particulate matter, oxides of sulphur and ammonia in the region. Automobiles are the prime sources of hydrocarbons, oxides of nitrogen and carbon monoxide emitting 95%, 77% and 70% respectively of their total emissions, while the contribution from domestic sources is not very significant.     

Simulation studies of ammonia removal from water in a membrane contactor under liquid–liquid extraction mode

Simulation studies were carried out, in an unsteady state, for the removal of ammonia from water via a membrane contactor. The contactor had an aqueous solution of NH₃ in the lumen and sulphuric acid in the shell side. The model equations were developed considering radial and axial diffusion and convection in the lumen. The partial differential equations were converted by the finite difference technique into a series of stiff ordinary differential equations w.r.t. time and solved using MATLAB. Excellent agreement was observed between the simulation results and experimental data (from the literature) for a contactor of 75 fibres. Excellent agreement was also observed between the simulation results and laboratory-generated data from a contactor containing 10,200 fibres. Our model is more suitable than the plug-flow model for designing the operation of the membrane contactor. The plug-flow model over-predicts the fractional removal of ammonia and was observed to be limited when designing longer contactors.     

Improved photocatalytic efficiency of TiO2 by doping with tungsten and synthesizing in ionic liquid: precise kinetics-mechanism and effect of oxidizing agents

Environmental Science and Pollution Research - The degradation of nitroaromatics/toxic energetic compounds contaminated water is a major cause of concern. W-doped TiO2 nanoparticles (NPs) were...     

Sleeping with a broken promise: The moderating role of generativity concerns in the relationship between psychological contract breach and insomnia among older workers

This paper examines the relationship between psychological contract breach and insomnia among older workers (aged 40 years and up). Drawing upon the conservation of resources theory, we conceptualize breach as a stressful event characterized by a perceived threat, failure to gain, or actual loss of valued resources, which increases psychological distress and insomnia. Moreover, we hypothesized that older workers' generativity concerns would act as a personal resource that would buffer the negative impact of breach. We tested our proposed model in 2 studies (Study 1 = 123; Study 2 = 168) of employee–spouse dyads. Results revealed that psychological distress mediated the relationship between psychological contract breach and insomnia. These mediated relationships were significant for those with low, but not for those with high levels of generativity concerns. These effects remained significant even after controlling for perceived organizational support (i.e., a social exchange mechanism). Theoretical and practical implications are discussed.     

Effect of PM2.5 chemical constituents on atmospheric visibility impairment

PM_2.5 sampling was conducted at a curbside location in Delhi city for summer and winter seasons, to evaluate the effect of PM_2.5 and its chemical components on the visibility impairment. The PM_2.5 concentrations were observed to be higher than the National Ambient Air Quality Standards (NAAQS), indicating poor air quality. The chemical constituents of PM_2.5 (the water-soluble ionic species SO₄^2-, NO₃^?, Cl^?, and NH₄⁺, and carbonaceous species: organic carbon, elemental carbon) were analyzed to study their impact on visibility impairment by reconstructing the light extinction coefficient, b_ext. The visibility was found to be negatively correlated with PM_2.5 and its components. The reconstructed b_ext showed that organic matter was the largest contributor to b_ext in both the seasons which may be attributed to combustion sources. In summer season, it was followed by elemental carbon and ammonium sulfate; however, in winter, major contributions were from ammonium nitrate and elemental carbon. Higher elemental carbon in both seasons may be attributed to traffic sources, while lower concentrations of nitrate during summer, may be attributed to volatility because of higher atmospheric temperatures.

Implications: The chemical constituents of PM_2.5 that majorly effect the visibility impairment are organic matter and elemental carbon, both of which are products of combustion processes. Secondary formations that lead to ammonium sulfate and ammonium nitrate production also impair the visibility.     

Highly efficient microwave-assisted one-pot synthesis of 4-aryl-2-aminothiazoles in aqueous medium

The thiazole ring system is one of the most important heterocycles in nature, as it represents an important structural motif of many biological compounds, including vitamin B₁ (Thiamin), carboxylase and penicillin. There is, therefore, an urgent need to design rapid, efficient and environmentally benign protocols for the synthesis of thiazoles. Herein, we have developed a one-pot protocol for the synthesis of 4-aryl-2-aminothiazoles from the reaction of aromatic ketones, NBS (N-Bromosuccinimide) and thioureas under microwave irradiation at 80–85 °C in PEG (polyethylene glycol)-400 and water as a green reaction medium. The products were obtained in 84–89% yields in 28–32 min. The method has several advantages such as use of green solvent, easy work-up, excellent yield and avoiding use of lachrymatric α-haloketones.