Total mercury determination in sand boxes from Montreal

Direct mercury analysis was successfully applied to determine trace levels of total mercury in samples from sand boxes in Montréal (Québec, Canada). Twenty sand boxes were sampled from across the city and divided into two size fractions, a fine fraction (<100 microm) and a whole fraction. The concentrations of mercury ranged from 1.6 to 35 microg Hg kg(-1) dry soil for the fine fraction and from 0.7 to 6 microg Hg kg(-1) dry soil for the whole fraction. The mercury concentrations correlated with the soil organic carbon content (R2= 0.67) in the sand. The ratio of the concentration of mercury in the fine over the whole fraction varied from 2.2 to 18. Using published soil ingestion rates for children, the calculated daily intake values varied from 0 to 0.5 ng Hg kg(-1) bw d(-1) with an estimated oral ingestion of 200 mg of sand and from 0.2 to 4.7 ng Hg kg(-1) bw d(-1) with an ingestion of 1750 mg of sand. None of the sand boxes contain sufficient amounts of mercury so as to exceed the currently accepted daily intake threshold of 0.105 microg Hg kg(-1) bw d(-1) established by Health Canada.     

Prenatal diagnosis of SMPD4 loss - A neurodevelopmental disorder with microcephaly,arthrogryposis and structural brain anomalies

SMPD4 loss is a rare neurodevelopmental disorder that leads to severe mental and physical disability and early death in infancy. Most cases of this genetic condition have been diagnosed postnatally. This article focuses on the prenatal findings of affected fetuses. The phenotypes can include growth restriction, arthrogryposis (clenched hands, foot deformity), as well as cerebral abnormalities (simplified gyral pattern/lissencephaly, cerebellar hypoplasia, corpus callosum deformity). SMPD4 loss is detectable via exome sequencing. Here, two fetuses displayed a homozygotic pathogen variant in the SMPD4 gene, encoding for the enzyme Sphingomyelinase-4. Both parents were heterozygous carriers of the pathogenic variant. On detection of the above mentioned signs exome sequencing is indicated, with focus on the SMPD4 gene.     

Prenatal diagnosis of partial agenesis of the corpus callosum in a fetus with thanatophoric dysplasia type 2

A fetus with thanatophoric dysplasia type 2 (TD2) associated with cloverleaf skull and abnormal development of the corpus callosum is reported. This case represents the first prenatal direct visualization of a partial agenesis of the corpus callosum (ACC) using high-resolution ultrasonography and colour power Doppler, which was confirmed by post-mortem magnetic resonance imaging (MRI). The causal link between cloverleaf skull in TD and partial ACC is discussed. Copyright © 2002 John Wiley & Sons, Ltd.     

Sorption of 2,4-dinitroanisole (DNAN) on lignin

The present study describes the use of two commercially available lignins, namely, alkali and organosolv lignin, for the removal of 2,4-dinitroanisole (DNAN), a chemical widely used by the military and the dye industry, from water. Sorption of DNAN on both lignins reached equilibrium within 10 hr and followed pseudo second-order kinetics with sorption being faster with alkali than with organosolv lignin, i.e. k₂ 10.3 and 0.3 g/(mg hr), respectively. In a separate study we investigated sorption of DNAN between 10 and 40°C and found that the removal of DNAN by organosolv lignin increased from 0.8 to 7.5 mg/g but reduced slightly from 8.5 to 7.6 mg/g in the case of alkali lignin. Sorption isotherms for either alkali or organosolv lignin best fitted Freundlich equation with enthalpy of formation, ΔH⁰ equaled to 14 or 80 kJ/mol. To help understand DNAN sorption mechanisms we characterized the two lignins by elemental analysis, BET nitrogen adsorption-desorption and ³¹P NMR. Variations in elemental compositions between the two lignins indicated that alkali lignin should have more sites (O- and S-containing functionalities) for H-bonding. The BET surface area and calculated total pore volume of alkali lignin were almost 10 times greater than that of organosolv lignin suggesting that alkali lignin should provide more sites for sorption. ³¹P NMR showed that organosolv lignin contains more phenolic -OH groups than alkali lignin, i.e., 70% and 45%, respectively. The variations in the type of OH groups between the two lignins might have affected the strength of H-bonding between DNAN and the type of lignin used.     

Drivers,barriers and incentives to implementing environmental management systems in the food industry: A case of Lebanon

The shift in policy towards prevention and towards making producers responsible for the pollution they cause has lead corporations to limit environmental liabilities through the improvement of environmental performance. The implementation of an Environmental Management System integrates the precautionary and polluter pays principles into a firm's operations and demonstrates commitment to sustainable development. This research aims at assessing the factors influencing the implementation of ISO 14001 Environmental Management System in developing countries taking the Food Industry in Lebanon as a case example. For this purpose, primary data were collected using a field survey questionnaire that was administered to a representative sample of facilities. The results revealed that the food industry is generally more concerned with safety and quality issues rather than environmental issues. Following international food sector trend, improving environmental performance and enhancing company image are the most salient drivers to adopt ISO 14001. The lack of government support and stakeholder demand as well as the fact that ISO 14001 is not a legal requirement constitute the most salient factors hindering the adoption of the standard. Economical and organizational factors are the most significant incentives required to motivate the food industry to adopt ISO 14001. The industry is less likely to voluntarily consider adopting ISO 14001 before acquiring a quality management certification or until ISO 14001 certification gain more recognition in the international food sector. The study defines the foundations for developing strategies, policy reforms and incentive schemes to reduce the barriers of implementing ISO 14001.     

Petrochemical markets in the UK: Methodological aspects of assessing future demand

This article focuses on how input-output techniques could be applied to study the petrochemical industry in general and plastics materials in particular. The theory serves as a tool for understanding the operations of the industry and, therefore, allows for a better control and organization of its development process.