Simulations and experiments in punching spring-steel devices with sub-millimeter features

This work demonstrates the feasibility of meso-scale (100 μm to mm) punching of multiple holes of intricate shapes in metals. Analytical modeling, finite element (FE) simulation, and experimentation are used in this work. Two-dimensional FE simulations in ABAQUS were done with an assumed material modeling and plane-strain condition. A known analytical model was used and compared with the ABAQUS simulation results to understand the effects of clearance between the punch and the die. FE simulation in ABAQUS was done for different clearances and corner radii of the punch, die, and holder. To complement modeling with real experiments and for the purpose of comparison, a set of punches and dies were made to punch out a miniature spring-steel gripper. Comparison of compliant grippers made by wire-cut electro discharge machining (EDM) and punching shows that realizing sharp interior and re-entrant corners by punching is not easy to achieve. However, the promise of realizing meso-scale parts with complicated shapes through punching is demonstrated in this work; and further work is identified and some strategies are suggested for improvement. The main contribution of this paper is in adapting the well-established punching and blanking operations to the meso-scale as a viable alternative to making miniature devices currently dominated by lithography-based techniques.     

Sorption of fenamiphos to different soils: the influence of soil properties

Fenamiphos (0-ethyl-0(3-methyl-4-methylthiophenyl)-isopropylamido-phosphate) is a widely used nematicide and insecticide in bowling greens and agriculture, but information on its sorption including its metabolites is limited. Hence, the sorption of fenamiphos (nematicide) and its major degradation products fenamiphos sulfoxide (FSO) and fenamiphos sulfone (FSO2) were determined in thirteen contrasting soils collected from Australia and Ecuador. The sorption coefficients (Kd) exhibited a wide range of variation from 2.48 to 14.94 L/Kg for fenamiphos; from 0 to 7.42 L/Kg for FSO and from 0 to 9.49 L/Kg for FSO2. The sorption affinity of the three compounds for all soils tested was as follows: fenamiphos > fenamiphos sulfone > fenamiphos sulfoxide. The results showed that the sorption of fenamiphos and its metabolites in some soils is very low, and in one case is nonexistant for the metabolites. This is of particular concern as due to its low sorption coefficient, the compound could easily migrate and contaminate water bodies. Fenamiphos and its oxidation products have been reported to be highly toxic to aquatic invertebrates and therefore, the information generated in this study assumes great importance in the risk assessment of fenamiphos and its metabolites in the environment.     

Urban heat island (UHI) influence on secondary pollutant formation in a tropical humid environment

The combined action of urbanization (change in land use) and increase in vehicular emissions intensifies the urban heat island (UHI) effect in many cities in the developed countries. The urban warming (UHI) enhances heat-stress-related diseases and ozone (O₃) levels due to a photochemical reaction. Even though UHI intensity depends on wind speed, wind direction, and solar flux, the thermodynamic properties of surface materials can accelerate the temperature profiles at the local scale. This mechanism modifies the atmospheric boundary layer (ABL) structure and mixing height in urban regions. These changes further deteriorate the local air quality. In this work, an attempt has been made to understand the interrelationship between air pollution and UHI intensity at selected urban areas located at tropical environment. The characteristics of ambient temperature profiles associated with land use changes in the different microenvironments of Chennai city were simulated using the Envi-Met model. The simulated surface 24-hr average air temperatures (11 m above the ground) for urban background and commercial and residential sites were found to be 30.81 ± 2.06, 31.51 ± 1.87, and 31.33 ± 2.1ºC, respectively. The diurnal variation of UHI intensity was determined by comparing the daytime average air temperatures to the diurnal air temperature for different wind velocity conditions. From the model simulations, we found that wind speed of 0.2 to 5 m/sec aggravates the UHI intensity. Further, the diurnal variation of mixing height was also estimated at the study locations. The estimated lowest mixing height at the residential area was found to be 60 m in the middle of night. During the same period, highest ozone (O₃) concentrations were also recorded at the continuous ambient air quality monitoring station (CAAQMS) located at the residential area.

Implications: An attempt has made to study the diurnal variation of secondary pollution levels in different study regions. This paper focuses mainly on the UHI intensity variations with respect to percentage of land use pattern change in Chennai city, India. The study simulated the area-based land use pattern with local mixing height variations. The relationship between UHI intensity and mixing height provides variations on local air quality.     

Analysis of some heavy metals in the riverine water, sediments and fish from river Ganges at Allahabad

The river Ganges has been one of the major recipients of industrial effluents in India. The present paper deals with the study related to occurrence and bioaccumulation of heavy metals (Cu, Cr, Cd, Pb, Zn) in the riverine water, sediment, and the muscles of two cat fish species, Channa punctatus (C. punctatus) and Aorichthys aor (A. aor) procured from the river Ganges at Allahabad. The data obtained after water analysis reflected the order of occurrence of heavy metals to be Zn > Pb > Cu > Cr > Cd, respectively. The analysis of heavy metals in sediment indicated that among the five heavy metals tested; Zn was maximally accumulated followed by Pb, Cr, Cu and Cd. The trend of heavy metals accumulation in fish muscles was found to be similar to that observed in sediment and water such as Zn > Pb > Cu > Cr > Cd. Data indicated that Zn accumulated maximally in the sediment as well as muscles of both of the fish species in comparison to other metals.     

Low NOx,High Efficiency Multistaged Burner: Fuel Oil Results

A multistaged combustion burner designed for in-furnace NO_x control and high combustion efficiency is being evaluated for high nitrogen content fuel and waste incineration application in a 0.6 MW package boiler simulator. A low NO_x precombustion chamber burner has been reduced in size by approximately a factor of two (from 600 to 250 ms first-stage residence time) and coupled with (1) air staging, resulting in a three-stage configuration, and (2) natural gas fuel staging, yielding up to four stolchlometric zones. Natural gas, doped with ammonia to yield a 5.8 percent fuel nitrogen content, and distillate fuel oil, doped with pyridine to yield a 2 percent fuel nitrogen content, were used to simulate high nitrogen content fuel/waste mixtures. The multistaged burner reduced NO emissions by 85 percent from emission levels from a conventional unstaged burner mounted on a commercial package bollerTA minimum NO emission level of 110 ppm was achieved in the fuel oil tests, from a level of 765 ppm for conventional firing. This is compared with a 160 ppm minimum NO level achieved in gaseous fuel tests, from an uncontrolled level of 1000 ppm. Boiler fuel staging, or reburnlng, appears to be superior to air staging for high combustion efficiency due to its minimal fuel-rich core and second flame front in the boiler.     

The influence of arsenic speciation (AsIII & AsV) and concentration on the growth, uptake and translocation of arsenic in vegetable crops (silverbeet and amaranth): greenhouse study

We examined arsenic (As) uptake by vegetable crops (amaranth, Amaranthus gangeticus, and silverbeet, Beta vulgaris) as affected by As speciation (As^III and As^V) and their concentrations in nutrient solution. Amaranth and silverbeet were grown in a nutrient solution containing four levels of arsenate (As^V): 0, 1, 5, and 25 mg As/l and three levels of arsenite (As^III): 0, 5, 10 mg As/l. Both As^V and As^III are phytotoxic to these crops with the latter being five times more toxic. Amaranth treated with As^III exhibited As toxicity symptoms within 48 h of exposure and was close to death within 1 week. However, As^V treatment did not show clear toxicity symptoms other than wilting and yield reduction at the highest dose rate of 25 mg As^V/l. The main mechanism used by vegetable crops to tolerate As^V is probably avoidance—limiting As transport to shoots and increasing As accumulation in the root system. When As^V was added to the nutrient solution, the uptake of As in shoots increased and, at the highest dose (25 mg As^V/l), 60 μg As/g DW (3.6 mg/kg FW) accumulated in the edible portion, which exceeds the WHO recommended limit for food stuffs (2 mg/kg FW) as the water contents of the crops were 94%. It is therefore important to determine the nature of the As species and their bio-accessibility. Iron treatment with 0.5 mg NaFe(III)EDTA/l dose decreased silverbeet As uptake by 45% given its affinity to bind As at the root surface or root rhizosphere and so restrict As translocation to the shoots.     

Biotic and abiotic degradation of illicit drugs, their precursor, and by-products in soil

This study presents the first systematic information on the degradation patterns of clandestine drug laboratory chemicals in soil. The persistence of five compounds - parent drugs (methamphetamine, 3,4-methylenedioxymethamphetamine (MDMA)), precursor (pseudoephedrine), and synthetic by-products N-formylmethylamphetamine and 1-benzyl-3-methylnaphthalene) - were investigated in laboratory scale for 1 year in three different South Australian soils both under non-sterile and sterile conditions. The results of the degradation study indicated that 1-benzyl-3-methylnaphthalene and methamphetamine persist for a long time in soil compared to MDMA and pseudoephedrine; N-formylmethylamphetamine exhibits intermediate persistence. The role of biotic versus abiotic soil processes on the degradation of target compounds was also varied significantly for different soils as well as with the progress in incubation period. The degradation of methamphetamine and 1-benzyl-3-methylnaphthalene can be considered as predominantly biotic as no measureable changes in concentrations were recorded in the sterile soils within a 1 year period. The results of the present work will help forensic and environmental scientists to precisely determine the environmental impact of chemicals associated with clandestine drug manufacturing laboratories.     

Vermiculture and waste management: study of action of earthworms Elsinia foetida, Eudrilus euginae and Perionyx excavatus on biodegradation of some community wastes in India and Australia

The practice of vermiculture is at least a century old but it is now being revived worldwide with diverse ecological objectives such as waste management, soil detoxification and regeneration and sustainable agriculture. Earthworms act in the soil as aerators, grinders, crushers, chemical degraders and biological stimulators. They secrete enzymes, proteases, lipases, amylases, cellulases and chitinases which bring about rapid biochemical conversion of the cellulosic and the proteinaceous materials in the variety of organic wastes which originate from homes, gardens, dairies and farms. The process is odour free because earthworms release coelomic fluids in the decaying waste biomass which has anti-bacterial properties which kills pathogens. The species used in India were Indian blue (Perionyx excavatus), African night crawler (Eudrilus euginae) and the Tiger worm (Elsinia foetida). E. foetida was used in Australia. E. euginae was found to have higher feeding, growth and biodegradation capacity compared to other two species.Earthworm action was shown to enhance natural biodegradation and decomposition of wastes (60–80 percent under optimum conditions), thus significantly reducing the composting time by several weeks. Within 5 to 6 weeks, 95–100 percent degradation of all cellulosic materials was achieved. Even hard fruit and egg shells and bones can be degraded, although these may take longer.     

Development of a Methodology for Selecting Criteria and Indicators of Sustainable Forest Management: A Case Study on Participatory Assessment

This paper describes an application of multiple criteria analysis (MCA) in assessing criteria and indicators adapted for a particular forest management unit. The methods include: ranking, rating, and pairwise comparisons. These methods were used in a participatory decision-making environment where a team representing various stakeholders and professionals used their expert opinions and judgements in assessing different criteria and indicators (C&I) on the one hand, and how suitable and applicable they are to a forest management unit on the other. A forest concession located in Kalimantan, Indonesia, was used as the site for the case study. Results from the study show that the multicriteria methods are effective tools that can be used as structured decision aids to evaluate, prioritize, and select sets of C&I for a particular forest management unit. Ranking and rating approaches can be used as a screening tool to develop an initial list of C&I. Pairwise comparison, on the other hand, can be used as a finer filter to further reduce the list. In addition to using these three MCA methods, the study also examines two commonly used group decision-making techniques, the Delphi method and the nominal group technique. Feedback received from the participants indicates that the methods are transparent, easy to implement, and provide a convenient environment for participatory decision-making.