The use of volcanic soil as mineral landfill liner--I. Physicochemical characterization and comparison with zeolites.

The main physicochemical characteristics of the volcanic soil of Southern Chile, with allophane as the main pedogenic mineral phase were analysed and compared with common zeolites (clinoptilolite) of the European market. The ultimate goal of this study was to test volcanic soil for the use as mineral landfill liner. The main results indicated that the clay and silt fractions together of the volcanic soil were between 38 and 54%. The buffering capacity of the volcanic soil was higher compared with the studied zeolites, whereas the cationic exchange capacity of the volcanic soil (between 5.2 and 6.5 cmol + kg(-1)) is of the same order of magnitude of the studied zeolites (between 9.7 and 11.4 cmol + kg(-1)). Moreover, the anionic exchange capacity of the volcanic soil was higher compared to the zeolites analysed. The hydraulic conductivity of the volcanic soil, measured in the laboratory at maximum proctor density, ranges between 5.16 x 10(-9) and 6.48 x 10(-9) m s(-1), a range that is comparable to the value of 4.51 x 10(-9) m s(-1) of the studied zeolite. The Proctor densities of the volcanic soil are in a lower range (between 1.11 and 1.15 g ml(-1)) compared with zeolites (between 1.19 and 1.34 g ml(-1)). The volcanic soil physicochemical characteristics are comparable to all the requirements established in the Austrian landfill directive (DVO, 2000). Therefore, the use as mineral landfill basal sealing of the analysed volcanic soil appears reasonable, having a pollutant adsorption capacity comparable to zeolites. It is of special interest for Southern Chile, because there are no alternative mineral raw materials for basal liners of landfills.     

Investigations on mechanical biological treatment of waste in South America: towards more sustainable MSW management strategies

This work presents an analysis on the suitability of mechanical biological treatment of municipal solid waste in South America, based on two previous experimental investigations carried out in two different countries. The first experiment was performed for determining the mass and volume reduction of MSW in the province of Concepción (Chile). The implemented bench-scale process consisted of a manual classification and separation stage, followed by an in-vessel biological degradation process. The second experiment consisted of a full-scale experiment performed in the city of Estrela (Brazil), where the existing municipal waste management facility was adapted to enhance the materials sorting and separation. Expressed in wet weight composition, 85.5% of the material input in the first experiment was separated for biological degradation. After 27 days of processing, 60% of the initial mass was reduced through degradation and water evaporation. The final fraction destined for landfilling equals 59% of the total input mass, corresponding to about 50% of the initial volume. In the second experiment, the fraction destined to landfill reaches 46.6% of the total input waste mass, whilst also significantly reducing the total volume to be disposed. These results, and the possible recovery of material streams suitable for recycling or for preparing solid recovered fuels, are the main advantages of the studied process.     

Applications of life cycle assessment and cost analysis in health care waste management

The establishment of rules to manage Health Care Waste (HCW) is a challenge for the public sector. Regulatory agencies must ensure the safety of waste management alternatives for two very different profiles of generators: (1) hospitals, which concentrate the production of HCW and (2) small establishments, such as clinics, pharmacies and other sources, that generate dispersed quantities of HCW and are scattered throughout the city. To assist in developing sector regulations for the small generators, we evaluated three management scenarios using decision-making tools. They consisted of a disinfection technique (microwave, autoclave and lime) followed by landfilling, where transportation was also included. The microwave, autoclave and lime techniques were tested at the laboratory to establish the operating parameters to ensure their efficiency in disinfection. Using a life cycle assessment (LCA) and cost analysis, the decision-making tools aimed to determine the technique with the best environmental performance. This consisted of evaluating the eco-efficiency of each scenario. Based on the life cycle assessment, microwaving had the lowest environmental impact (12.64 Pt) followed by autoclaving (48.46 Pt). The cost analyses indicated values of US$ 0.12 kg^?1 for the waste treated with microwaves, US$ 1.10 kg^?1 for the waste treated by the autoclave and US$ 1.53 kg^?1 for the waste treated with lime. The microwave disinfection presented the best eco-efficiency performance among those studied and provided a feasible alternative to subsidize the formulation of the policy for small generators of HCW.     

Going beyond the rhetoric: system-wide changes in universities for sustainable societies

In October 2008, the 5th Environmental Management for Sustainable Universities (EMSU) international conference was held in Barcelona, Spain. It dealt with the need to rethink how our higher educational institutions are facing sustainability. This special issue has been primarily derived from contributions to that conference. This issue builds upon related academic international publications, which have analysed how to use the critical position of universities to accelerate their pace of working to help to make the transition to truly SUSTAINABLE SOCIETIES!This issue focus is on the ‘softer’ issues, such as changes in values, attitudes, motivations, as well as in curricula, societal interactions and assessments of the impacts of research. Insights derived from the interplay of the ‘softer’ issues with the ‘harder’ issues are empowering academic leaders to effectively use leverage points to make changes in operations, courses, curricula, and research. Those changes are being designed to help their students and faculty build resilient and sustainable societies within the context of climate change, the Decade of Education for Sustainable Development (DESD), and the UN Millennium Development Goals (MDGs).The overall systems approach presented by Stephens and Graham provides a structured framework to systematize change for sustainability in higher education, by stressing on the one hand the need for “learning to learn” and on the other hand by integrating leadership and cultural aspects. The “niche” level they propose for innovative interactions between practitioners such as EMSU is exemplary developed by all of the other documents in this special issue. To highlight some of the key elements of the articles in this issue, there are proposals for new educational methods based in sustainability science, a set of inspirational criteria for SD research activities, new course ranking and assessment methods and results of psychological studies that provide evidence that participatory approaches are the most effective way to change values within university members in order to facilitate the development and sharing of new sustainability norms.     

Sustainability assessment of a giant bamboo plantation in Brazil: exploring the influence of labour,time and space

Bamboo presents physical and mechanical characteristics, which turn it an alternative option for product development, replacing native or reforested wood. The sustainability assessment of a Dendrocalamus Giganteus species plantation in Brazil through the emergy methodology evidences a great weight of renewable (30% sej/sej) and human labour contributions (33% sej/sej). These contributions account for the great interface with environment and to the intensive work, respectively. The transformity value of bamboo production is 2.42E + 04 sej/J. The influence human labour has on the total emergy flow and on indicators is evaluated by taking into account different country locations (Brazil, Australia and China). Thus, a different transformity value for labour is assumed for each country. A ranking based on emergy sustainability index (ESI) values shows that bamboo production in China was the first placed, followed by Brazil and Australia (values of 1.18, 0.50 and 0.09, respectively). The insertion of indirect renewability embedded in labour results in the ranking modification, leading to plantation in Brazil in the first place, followed by the Australian and Chinese ones. The relative position of the bamboo systems is visualized in the ternary diagram expressed in terms of emergy. In an attempt to explore the relationship between sustainability and time, a graphic of ESI vs. global productivity is discussed in terms of a prospective evaluation. Indirect support areas of the bamboo production are calculated as a way to evaluate the sustainability-space relationship.