Influence of coagulation mechanisms and floc formation on filterability

Minimizing particles in water is a key goal for improving drinking water quality and safety.The media filtration process,as the last step of the solid–liquid separation process,is largely influenced by the characteristics of flocs,which are formed and controlled within the coagulation process.In a laboratory-based study,the impacts of the physical characteristics of flocs formed using aluminum sulfate on the filtration treatment of two comparative water samples were investigated using a photometric dispersion analyzer and a filterability apparatus.In general,the optimum dosage for maximizing filterability was higher than that for minimizing turbidity under neutral p H conditions.For a monomeric aluminum-based coagulant,the charge neutralization mechanism produced better floc characteristics,including floc growth speed and size,than the sweep flocculation mechanism.In addition,the charge neutralization mechanism showed better performance compared to sweep flocculation in terms of DOC removal and floc filterability improvement for both waters,and showed superiority in turbidity removal only when the raw water had high turbidity.For the different mechanisms,the ways that floc characteristics impacted on floc filterability also differed.The low variation in floc size distribution obtained under the charge neutralization mechanism resulted in the flocs being amenable to removal by filtration processes.For the sweep flocculation mechanism,increasing the floc size improved the settling ability of flocs,resulting in higher filter efficiency.     

Obtaining and characterization of catalytic materials from waste tires for the Fischer–Tropsch process

Journal of Material Cycles and Waste Management - In this contribution, the preparation of iron-based catalysts from waste tires is reported. Waste steel from disused tires was used as feedstock to...     

Pharmaceutical compound removal efficiency by a small constructed wetland located in south Brazil

Environmental Science and Pollution Research - The fate of pharmaceuticals during the treatment of effluents is of major concern since they are not completely degraded and because of their...     

Transformation of a landfill covering amended with municipal waste compost, Perugia, Italy

This research deals with the transformation of an anthropomorphous landfill covering composed of a fill soil mixed with mechanically separated municipal waste compost. The study site was a municipal landfill near Perugia, Italy. Throughout the years, waste disposal in the landfill was performed by burial in horizontal layers, each one representing a yearly disposal. The external front of the landfill thus represented the yearly disposal over a 10-yr period starting in 1993. Temporal changes in the anthropomorphous soil over this period were studied by examining and describing soil profiles, and by collecting and analyzing soil samples from the 1993, 1994, 1997, and 2001 disposals. The samples were subjected to a series of physical, chemical, and biochemical analyses. The results obtained suggest that over a 10-yr period the top layer gained a pedological structure (subangular blocky and/or crumb) giving rise to an A horizon. Improved soil structure was confirmed by an increase in macroporosity, particularly for pores larger than 50 microm, measured by image analysis of soil thin sections. Total extractable carbon showed an increase in the content of humic substances, evidenced by parameters of humification. Enzymatic activities in the A and C1 horizons were also indicative of soil evolution and may serve as a valid indicator for monitoring the evolution of anthropogenic soils containing municipal waste compost.     

MODELING GROUND WATER FLOW USING FLUX BOUNDARY CONDITIONS1

ABSTRACT: Determination of the boundary conditions for modeling ground water flow is a critical point especially in regional models. Normally the regional models require model areas that are greater than the given area of interest. This work focuses on the prediction of hydraulic heads in regional models using flux boundary conditions. The model uses flux boundary conditions that were estimated using a radial flow analog and Darcy's law. The regional model that is presented uses no parameter identification (inverse estimation) procedures. In the present work, the Houston area was used. The simulation of the hydrological conditions of the Chicot and Evangeline Aquifers that underlie the Houston area were made using the available information about the geological profile in the Houston region and the current information about the existing production wells. The regional model works as a forward problem. The system parameters such as hydraulic conductivity, specific storage, and hydrological stresses were specified, and the model predicts the hydraulic head. Actual data from piezometers operated by the U.S. Geological Survey (USGS) in many places throughout Houston were used as initial conditions. Some piezometric head data were generated using the regional variable theory called kriging to supply head estimates in areas where data were unavailable. The Modular Three Dimensional Finite Difference Groundwater Flow Model developed by the USGS was used to predict the hydraulic heads. The predicted ground water heads are compared to the actual data. The results show that the model performs well for locations where data were available.     

Chlorophyll and suspended sediment mapping to the Caribbean Sea from rivers in the capital city of the Dominican Republic using ALOS AVNIR-2 data

This study aims to study the distribution of contaminants in rivers that flow into the Caribbean Sea using chlorophyll-a (Chl-a) and suspended sediment (SS) as markers and ALOS AVNIR-2 satellite sensor data. The Haina River (HN) and Ozama and Isabela Rivers (OZ-IS) that flow through the city of Santo Domingo, the capital of the Dominican Republic, were chosen. First, in situ spectral reflectance/Chl-a and SS datasets obtained from these rivers were acquired in March 2011 (case A: with no rain influence) and June 2011 (case B: with rain influence), and the estimation algorithm of Chl-a and SS using AVNIR-2 data was developed from the datasets. Moreover, the developed algorithm was applied to AVNIR-2 data in November 2010 for case A and August 2010 for case B. Results revealed that for Chl-a and SS estimations under cases A and B conditions, the reflectance ratio of AVNIR-2 band 4 and band 3 (AV4/AV3) and the reflectance of AVNIR-2 band 4 (AV4) were effective. The Chl-a and SS mapping results obtained using AVNIR-2 data corresponded with the field survey results. Finally, an outline of the distribution of contaminants at the mouth of the river that flows into the Caribbean Sea was obtained for both rivers in cases A and B.     

Effect of liquid cow manure on andisol properties and atrazine adsorption

Application of animal manure amendments to agricultural soils is a common practice to improve soil fertility through the addition of essential plant nutrients. This practice may increase the potential for atrazine (2-chloro-4-ethylamino-6-isopropylamino-1, 3, 5-triazine) leaching due to competition for adsorption sites between the pesticide and dissolved organic carbon (DOC) added through manure. We evaluated the influence of liquid cow manure (LCM) application on soil properties, atrazine adsorption, and the physicochemical controlling mechanisms in an Andisol. The LCM was applied at rates equivalent to 0, 100,000, 200,000, and 300,000 L ha(-1), resulting in treatments S-0, S-100, S-200, and S-300, respectively. The LCM application increased DOC and pH of the soils immediately on addition, but pH returned to S-0 values 30 d after application. The LCM application did not modify atrazine adsorption with the two lowest application rates (S-100 and S-200), but atrazine adsorption was decreased in S-300 (K(f) = 0.96) compared with the control (S-0) (K(f) = 1.19), possibly due to the competitive adsorption of DOC with the pesticide. The Fourier-transformed infrared analysis showed that LCM increased aliphaticity and presence of N-containing groups and polysaccharide-like groups in amended soils; however, these properties did not modify the atrazine interaction in the studied amended soils. Interestingly the addition of DOC to soil at the high application rate (S-300) reduced atrazine adsorption in this rich OM Andisol despite the LCM not raising the concentration of stable organic matter. The application of high rates of liquid manure containing DOC incurs an increased risk of pesticide leaching.     

Directional changes in the species composition of a tropical forest

Long-term studies have revealed that the structure and dynamics of many tropical forests are changing, but the causes and consequences of these changes remain debated. To learn more about the forces driving changes within tropical forests, we investigated shifts in tree species composition over the past 25 years within the 50-ha Forest Dynamics Plot on Barro Colorado Island (BCI), Panama, and examined how observed patterns relate to predictions of (1) random population fluctuations, (2) carbon fertilization, (3) succession from past disturbance, (4) recovery from an extreme El Ni?o drought at the start of the study period, and (5) long-term climate change. We found that there have been consistent and directional changes in the tree species composition. These shifts have led to increased relative representations of drought-tolerant species as determined by the species' occurrence both across a gradient of soil moisture within BCI and across a wider precipitation gradient from a dry forest near the Pacific coast of Panama to a wet forest near its Caribbean coast. These nonrandom changes cannot be explained by stochastic fluctuations or carbon fertilization. They may be the legacy of the El Ni?o drought, or alternatively, potentially reflect increased aridity due to long-term climate change. By investigating compositional changes, we increased not only our understanding of the ecology of tropical forests and their responses to large-scale disturbances, but also our ability to predict how future global change will impact some of the critical services provided by these important ecosystems.     

Continuous Safety Sampling Methodology

This research introduces a proactive methodology for accident prevention, called Continuous Safety Sampling Methodology, by utilizing the principles of work sampling and control charting. Sampling is performed to observe the occurrence of conditions that may become hazardous in a given system. These conditions, known as dendritics, may become hazards and could result in an accident or occupational disease. Continuous Safety Sampling Methodology performs a random sampling for the occurrence of these dendritics. The collected data are then used to generate a control chart. Based on the pattern of the control chart, a system “under control” is not disturbed whereas a system “out of control” is investigated for potential conditions becoming hazardous. Appropriate steps are then taken to eliminate or control these conditions to maintain a desired safe system.     

Endangered Cacti in the Chihuahuan Desert: II. Biogeography and Conservation

The distributions of the majority of the endangered cacti in the Chihuahuan Desert Region are concentrated in the southeastern and eastern segments of the area, where the predominance of narrow endemism is a remarkable phytogeographic phenomenon. We used three criteria—species richness, conservation value, and complementarity—to evaluate 37 cactus-rich area units in the Chihuahuan Desert. The evaluation of these three quantitative parameters together allowed us to determine that seven of these areas (Huizache, Tolimán, Ciudad Victoria, Metztitlán, Cuatro Ciénegas, Jaumave, and Xichú) should be considered conservation priorities because they hold the most significant assemblage of endangered species, in terms of their numbers and their rarity. Conservation actions in these seven areas would protect 52 (55.9%) of the 93 endangered species studied here, most of which have extremely narrow distributions. Geographically, these critical areas are located in the Queretaroan-Hidalgoan arid zone (in the States of Querétaro, Hidalgo, and Guanajuato), in the Jaumave Valley (Tamaulipas), and in two disjunct areas (San Luis Potosí and Coahuila) in the interior of the Chihuahuan Desert.