Characteristics of dwellings contaminated by moulds

Dwellings showing a presence of moulds are considered to be unhealthy both by the inhabitants and by sanitary authorities. Although the thresholds of pathogenicity have not yet been established, the toxic, allergic and infectious risk of indoor moulds is better understood today. A study on indoor fungi contamination for 128 dwellings was done between October and May in France. It concerned 69 dwellings, the occupants of which either complained to the sanitary authorities about problems of moulds and humidity or consulted a doctor who related their symptoms to housing conditions. Fifty-nine other dwellings, the occupants of which were healthy, constituted the control group. We present the statistical analysis of questionnaires, which aimed to clarify characteristics of dwellings associated with high concentrations of airborne moulds. Air samples were taken with an impactor in 500 rooms. On visiting dwellings, investigators obtained answers to 25 questions concerning characteristics of inhabitants and living space, as well as the presence of mould indicators. Indoor and outdoor temperature and indoor relative humidity of air measurements were taken. The total concentration of fungi in the air was significantly higher in ground floor apartments versus those on other floors (p = 0.047), in small and highly occupied dwellings (p = 0.03 and 0.003), in dwellings with electric heating (p = 0.04), without a ventilation system (p = 0.003), with water damage (p = 0.003), and finally, in those where the investigator noted an odour of moisture or visible moulds (p < 0.001). The efficacy of the latter criteria in the evaluation of insalubrity is discussed.     

Assessment of potential health risk for inhabitants living near a former lead smelter. Part 1: metal concentrations in soils, agricultural crops, and homegrown vegetables

Soil contamination by metals engenders important environmental and health problems in northern France where a smelter (Metaleurop Nord) was in activity for more than a century. This study aims to look at the long-term effects of the smelter after its closedown by combining data on the degree of soil contamination and the quality of the crops grown (agricultural crops and homegrown vegetables) in these soils for a better assessment of the local population’s exposure to Cd, Pb, and Zn. Seven years after the Metaleurop Nord closedown, (1) the agricultural and urban topsoils were strongly contaminated by Cd, Pb, and Zn; (2) the kitchen garden topsoils were even more polluted than the agricultural soils, with great variability in metal concentrations within the gardens studied; (3) a high proportion of the agricultural crops for foodstuffs did not conform with the European legislation; (4) for feedstuffs, most samples did not exceed the Cd and Pb legislation limits, indicating that feedstuffs may be an opportunity for most agricultural produce; and (5) a high proportion of the vegetables produced in the kitchen gardens did not conform with the European foodstuff legislation. The high contamination level of the soils studied continues to be a risk for the environment and the population’s health. A further investigation (part 2) assesses the associated potential health risk for local inhabitants through consumption of homegrown vegetables and ingestion of soil particles by estimating the site-specific human health assessment criteria for Cd and Pb.     

Bioaccessibility of trace elements as affected by soil parameters in smelter-contaminated agricultural soils: a statistical modeling approach

An investigation was undertaken to identify the most significant soil parameters that can be used to predict Cd, Pb, and Zn bioaccessibility in smelter-contaminated agricultural soils. A robust model was established from an extended database of soils by using: (i) a training set of 280 samples to select the main soil parameters, to define the best population to be taken into account for the model elaboration, and to construct multivariate regression models, and (ii) a test set of 110 samples to validate the ability of the regression models. Total carbonate, organic matter, sand, P(2)O(5), free Fe-Mn oxide, and pseudototal Al and trace element (TE) contents appeared as the main variables governing TE bioaccessibility. The statistical modeling approach was reasonably successful, indicating that the main soil factors influencing the bioaccessibility of TEs were taken into account and the predictions could be applicable for further risk evaluation in the studied area.     

Use of native mosses as biomonitors of heavy metals and nitrogen deposition in the surroundings of two steel works

A biomonitoring survey using the moss species Hypnum cupressiforme Hedw. was conducted in the surroundings of two steel plants located in the North of Spain. Levels of V, Cr, Ni, Cu, Zn, As, Cd, Hg, Pb and N were determined. Very high concentrations in the areas of study were detected when compared to nearby unaffected regions. Similar trends were observed for all the elements in the differently orientated transects, showing an appreciable influence of the NW prevailing winds of the region in the dispersion of pollutants, as well as a clear decreasing gradient in the concentrations of metals in mosses within a distance of 1500 meters from the facilities. A differentiation between the elements emitted by the chimney as result of the industrial activity (V, Cr, Ni, Cu and As) and those with a high presence in steel slag deposits (Zn, Cd, Hg and Pb) was observed. The range of contamination was also established by means of the Contamination Factor, indicating a category 4 out of 6 categories, which shows the high levels reported in the areas of study. A different dynamic was registered for nitrogen regarding the rest of the heavy metals analysed except for Hg, probably due to the elevated volatility and mobility of both elements, as well as their high persistence in the atmosphere.     

The role of body size versus growth on the decision to migrate: a case study with Salmo trutta

In a population exhibiting partial migration (i.e. migration and residency tactics occur in the same population), the mechanisms underlying the tactical choice are still unclear. Empirical studies have highlighted a variety of factors that could influence the coexistence of resident and migratory individuals, with growth and body size considered to be key factors in the decision to migrate. Most studies suffer from at least one of the two following caveats: (1) survival and capture probabilities are not taken into account in the data analysis, and (2) body size is often used as a proxy for individual growth. We performed a capture–mark–recapture experiment to study partial migration among juvenile brown trout Salmo trutta at the end of their first year, when a portion of the population emigrate from the natal stream while others choose residency tactic. Bayesian multistate capture–recapture models accounting for survival and recaptures probabilities were used to investigate the relative role of body size and individual growth on survival and migration probabilities. Our results show that, despite an apparent effect of both size and growth on migration, growth is the better integrative parameter and acts directly on migration probability whereas body size acts more strongly on survival. Consequently, we recommend caution if size is used as a proxy for growth when studying the factors that drive partial migration in juvenile salmonid species.     

PM2.5 source apportionment in a French urban coastal site under steelworks emission influences using constrained non-negative matrix factorization receptor model

The constrained weighted-non-negative matrix factorization(CW-NMF) hybrid receptor model was applied to study the influence of steelmaking activities on PM_(2.5)(particulate matter with equivalent aerodynamic diameter less than 2.5 μm) composition in Dunkerque,Northern France. Semi-diurnal PM_(2.5)samples were collected using a high volume sampler in winter 2010 and spring 2011 and were analyzed for trace metals, water-soluble ions, and total carbon using inductively coupled plasma – atomic emission spectrometry(ICP-AES),ICP- mass spectrometry(ICP-MS), ionic chromatography and micro elemental carbon analyzer. The elemental composition shows that NO_3~-, SO_4~(2-), NH_4~+and total carbon are the main PM_(2.5)constituents. Trace metals data were interpreted using concentration roses and both influences of integrated steelworks and electric steel plant were evidenced. The distinction between the two sources is made possible by the use Zn/Fe and Zn/Mn diagnostic ratios. Moreover Rb/Cr, Pb/Cr and Cu/Cd combination ratio are proposed to distinguish the ISW-sintering stack from the ISW-fugitive emissions. The a priori knowledge on the influencing source was introduced in the CW-NMF to guide the calculation. Eleven source profiles with various contributions were identified: 8 are characteristics of coastal urban background site profiles and 3 are related to the steelmaking activities. Between them,secondary nitrates, secondary sulfates and combustion profiles give the highest contributions and account for 93% of the PM_(2.5)concentration. The steelwork facilities contribute in about 2%of the total PM_(2.5)concentration and appear to be the main source of Cr, Cu, Fe, Mn, Zn.     

Natal departure timing from spatially varying environments is dependent of individual ontogenetic status

Natal departure timing represents one of the first crucial decisions for juveniles born in spatially varying environments that ultimately disappear, but our knowledge on its determinants is limited. The present study aimed at understanding the determinants of juvenile natal departure by releasing individually tagged juvenile pike (Esox lucius L.) with variable body size and trophic position in a temporary flooded grassland. Specifically, we investigated whether natal departure depends on individual competitive status (‘competition hypothesis’), physiological tolerance to environmental conditions (‘physiological hypothesis’) or individual trophic position and the spatial heterogeneity of trophic resources (‘trophic hypothesis’). The results indicated that departure timing was negatively correlated with body size at release, showing that the dominance status among competing individuals was not the main trigger of juvenile departure. A positive correlation between departure timing and individual body size at departure was observed, suggesting that inter-individual variability in physiological tolerance did not explain departure patterns. While individual growth performances were similar irrespective of the timing of natal departure, stable isotope analyses revealed that juveniles with higher trophic position departed significantly earlier than individuals with lower trophic position. Therefore, the trade-off driving the use of spatially varying environments was most likely dependent upon the benefits associated with energetic returns than the costs associated with inter-individual competition or physiological stress. This result highlighted how ontogeny, and particularly ontogenetic niche shift, can play a central role in juvenile’s decision to depart from natal habitats in a predatory species.     

Time‐based differences in the effects of positive and negative affectivity on perceived supervisor support and organizational commitment among newcomers

Building on the broaden‐and‐build theory and research on the negativity bias, this study examines how trait affectivity, as a stable predisposition predicting the pattern of emotional responding, shapes newcomers' perceptions of supervisor support and experience of organizational commitment. Using latent growth modeling and data collected at four points in time from newcomers (N = 158), we found the initial level of perceived supervisor support to mediate a negative relationship between negative affectivity and the level of commitment. Moreover, although newcomers experienced a general decrease in perceived supervisor support and a related decrease in commitment, those with high positive affectivity experienced a weaker decrease in perceived supervisor support, which led to a weaker decrease in commitment. Incidentally, positive affectivity was also positively related to the initial level of commitment. Two post hoc studies indicated that positive and negative affectivity exerted their effects controlling for state affect and replicated the relationship between change in perceived support and commitment. We discuss how these findings inform our understanding of trait affectivity's influence on newcomers' work attitudes.     

Atmospheric Polycyclic Aromatic Hydrocarbons at a Point Source of Emissions. Part A: Identification and Determination of Polycyclic Aromatic Compounds in Airborne Particulate Matter Near a Horizontal Stud Soderberg Plant

Abstract

This paper summarizes the sampling and analytical methods developed to identify and measure polycyclic aromatic hydrocarbons (PAH) and related aromatic compounds near a Horizontal Stud Soderberg plant at Jonquiere, Quebec, Canada. The primary source of PAH is the coal tar pitch used as a binder in Soderberg anodes. Twice a week at a number of sampling sites, airborne particulate matter was collected on glass-fiber filters using a Hi-Vol sampler for a twenty-four hour period. Organics on the filter were Soxhlet extracted with benzene.

Identification was done by gas chromatography-mass spectrometry (GC-MS). The vast majority of compounds present were PAH, but small amounts of alkyl PAH and polycyclic aromatic compounds with heteroatoms such as nitrogen, oxygen and sulfur were also identified. Based on the GC-MS identification, a group of 14 PAH was selected for monitoring. Frequent PAH determinations revealed that the ratio of Benzo(a- )Pyrene to total PAH on the Hi-Vol filters is relatively constant in ambient air from one sampling station to another.