Ambient nitrogen oxides exposure and early childhood respiratory illnesses

Acute respiratory infections are common in children below 5 years and recent studies suggest a possible link with air pollution. In this study, we investigated the association between ambient nitrogen oxides (NO_x) and bronchitis or upper airway inflammation.This longitudinal study was conducted in Teplice and Prachatice districts, Czech Republic. Children were followed from birth to 4.5 years of age. Data were compiled from medical records at delivery and at follow up, and from self-administered questionnaires from the same two time points. Air pollution monitoring data were used to estimate exposure over five different averaging periods ranging from three to 45 days prior to an episode. To quantify the association between exposure and outcome, while accounting for repeated measure correlation we conducted logistic regression analysis using generalized estimating equations.During the first 2 years of life, the adjusted rate ratio for bronchitis associated with interquartile increase in the 30-day average NO_x was 1.31 [95% confidence interval (CI): 1.07, 1.61] and for two to 4.5 year olds, it was 1.23 (95% CI: 1.01, 1.49). The 14-day exposure also had stable association across both age groups: below 2 years it was 1.25 (95% CI: 1.06, 1.47) and for two to 4.5 years it was 1.21 (95% CI: 1.06, 1.39). The association between bronchitis and NO_x increased with child's age in the under 2 years group, which is a relatively novel finding.The results demonstrate an association between NO_x and respiratory infections that are sufficiently severe to come to medical attention. The evidence, if causal, can be of public health concern because acute respiratory illnesses are common in preschool children.     

Effect of sodium arsenite on adrenocortical activity in immature female rats: evidence of dose dependent response

ｎｔｒｏｄｕｃｔｉｏｎＡｒｓｅｎｉｃ，ａｍｅｔａｌｌｏｉｄ，ｉｓａｎｏｎｅｓｓｅｎｔｉａｌｔｒａｃｅｅｌｅｍｅｎｔ，ｈａｓｂｅｅｎｃｌａｉｍｅｄｔｏｂｅｏｆｃｌｉｎｉｃａｌｂｅｎｅｆｉｔｉｎｔｈｅｔｒｅａｔｍｅｎｔｏｆｓｙｐｈｉｌｉｓ，ａｍｏｅｂｉａｓｉｓａｎｄｏｔｈｅｒｔｒｏｐｉｃａｌｄｉｓｅａｓｅｓ（Ｋｌａａｓｓｅｎ，１９９０；Ｋｏｗａｇｕｃｈｉ，１９８１）．Ｂｅｓｉｄｅｉｔｓｃｌｉｎｉｃａｌｉｍｐｏｒｔａｎｃｅ，ａｒｓｅｎｉｃｉｓｒｅｐｏｒｔｅｄｔｏｂｅａｎｉｍｐｏｒｔａｎｔｗａｔｅｒｐｏ…     

Application of a ‘bio-engineering’ technique to protect ghoramara island (Bay of Bengal) from severe erosion

Ghoramara Island is located ca. 150 km south of Kolkata, Bay of Bengal, India, in the Sundarban Delta complex. This sparsely populated island is suffering from severe coastal erosion and areal reduction for the last three decades, which results in the loss of major areas on the northwest coast. Both numerous households and a significant area of agricultural land and coastal stretches for fish drying have been lost. This has rendered thousands of people homeless as ‘environmental refugess’. In the present paper an attempt is made to study the erosion and accretion process through time series analysis using a GIS technique. Also, a study of remedial measures to protect the island using a ‘bio-engineering’ technique is reported in this paper. It has been shown that, in the absence of protection measures, the eastern shore will merge with the Indian mainland during the next 25 years, while the western part will be completely washed off.     

A comparative assessment of waste incinerators in the UK

The uptake in Europe of Energy from Waste (EfW) incinerator plants has increased rapidly in recent years. In the UK, 25 municipal waste incinerators with energy recovery are now in operation; however, their waste supply chains and business practices vary significantly. With over a hundred more plant developments being considered it is important to establish best business practices for ensuring efficient environmental and operational performance. By reviewing the 25 plants we identify four suitable case study plants to compare technologies (moving grate, fluidised bed and rotary kiln), plant economics and operations. Using data collected from annual reports and through interviews and site visits we provide recommendations for improving the supply chain for waste incinerators and highlight the current issues and challenges faced by the industry. We find that plants using moving grate have a high availability of 87–92%. However, compared to the fluidised bed and rotary kiln, quantities of bottom ash and emissions of hydrogen chloride and carbon monoxide are high. The uptake of integrated recycling practices, combined heat and power, and post incineration non-ferrous metal collections needs to be increased among EfW incinerators in the UK. We conclude that one of the major difficulties encountered by waste facilities is the appropriate selection of technology, capacity, site, waste suppliers and heat consumers. This study will be of particular value to EfW plant developers, government authorities and researchers working within the sector of waste management.     

Adsorption–desorption of metolachlor and atrazine in Indian soils: effect of fly ash amendment

The effect of two fly ashes as soil amendment on the adsorption–desorption of metolachlor [2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylphenyl)] and atrazine (2-chloro-4-ethylamino-6-isopropylamino-1,3,5-triazine) was studied in alluvial and laterite soils. The adsorption data for both the herbicides fitted well the Freundlich equation, and Freundlich adsorption coefficient (K _f) increased with an increase of fly ash amount. Both the fly ashes differed in their extent to increase herbicide sorption, and the effect was different in different soils. Atrazine was sorbed more in the soils/soils?+?fly ash mixtures than the metolachlor. The K _f values showed significant correlation with the amount of fly ash amendment (correlation coefficient, R?>?0.982). The desorption isotherms also fitted the Freundlich equation, and desorption showed hysteresis which increased with an increase in the content of fly ash amendment. The free energy change (ΔG) indicated that the sorption process is exothermic, spontaneous, and physical in nature. The study has shown that fly ash as soil amendment significantly increased the sorption of metolachlor and atrazine, but the effect is soil- and fly ash-specific.     

Green synthesis of silver nanoparticles by microorganism using organic pollutant: its antimicrobial and catalytic application

A novel approach for the green synthesis of silver nanoparticles (AgNPs) from aqueous solution of AgNO₃ using culture supernatant of phenol degraded broth is reported in this work. The synthesis was observed within 10 h, and AgNPs showed characteristic surface plasmon resonance around 410 nm. Spherical nanoparticles of size less than 30 nm were observed in transmission electron microscopy. X-ray diffraction pattern corresponding to 111, 200, 220, and 311 revealed the crystalline nature of the as-formed nanoparticles. It was found that the colloidal solution of AgNP suspensions exhibited excellent stability over a wide range of ionic strength, pH, and temperature. The effect of pH and ionic strength indicated that stabilization is due to electrostatic repulsion arising from the negative charge of the conjugate proteins. The AgNPs showed highly potent antimicrobial activity against Gram-positive, Gram-negative, and fungal microorganisms. The as-prepared AgNPs showed excellent catalytic activity in reduction of 4-nitrophenol to 4-aminophenol by NaBH₄. By manufacturing magnetic alginate beads, the reusability of the AgNPs for the catalytic reaction has been demonstrated.     

Proteomic insights into Lysinibacillus sp.-mediated biosolubilization of manganese

Environmental Science and Pollution Research - There has been alarming depletion of manganese (Mn) reserves owing to the ongoing extensive mining operations for catering the massive industrial...     

In situ formation of bimetallic FeNi nanoparticles on sand through green technology: Application for tetracycline removal

• In situ preparation of FeNi nanoparticles on the sand via green synthesis approach. • Removal of tetracycline using GS-FeNi in batch and column study. • Both reductive degradation and sorption played crucial role the process. • Reusability of GS-FeNi showed about 77.39±4.3% removal on 4th cycle. • TC by-products after interaction showed less toxic as compared with TC. In this study, FeNi nanoparticles were green synthesized using Punica granatum (pomegranate) peel extract, and these nanoparticles were also formed in situ over quartz sand (GS-FeNi) for removal of tetracycline (TC). Under the optimized operating conditions, (GS-FeNi concentration: 1.5% w/v; concentration of TC: 20 mg/L; interaction period: 180 min), 99±0.2% TC removal was achieved in the batch reactor. The removal capacity was 181±1 mg/g. A detailed characterization of the sorbent and the solution before and after the interaction revealed that the removal mechanism(s) involved both the sorption and degradation of TC. The reusability of reactant was assessed for four cycles of operation, and 77±4% of TC removal was obtained in the cycle. To judge the environmental sustainability of the process, residual toxicity assay of the interacted TC solution was performed with indicator bacteria (Bacillus and Pseudomonas) and algae (Chlorella sp.), which confirmed a substantial decrease in the toxicity. The continuous column studies were undertaken in the packed bed reactors using GS-FeNi. Employing the optimized conditions, quite high removal efficiency (978±5 mg/g) was obtained in the columns. The application of GS-FeNi for antibiotic removal was further evaluated in lake water, tap water, and ground water spiked with TC, and the removal capacity achieved was found to be 781±5, 712±5, and 687±3 mg/g, respectively. This work can pave the way for treatment of antibiotics and other pollutants in the reactors using novel green composites prepared from fruit wastes.     

Synthesis of Soy-Polyol by Two Step Continuous Route and Development of Soy-Based Polyurethane Foam

Soy-polyol has been synthesized via a low energy two-step continuous route thus avoiding intermediate steps and chemicals. The functional groups of soy-polyol thus produced were identified by Fourier transform infrared (FTIR) spectroscopy which confirmed the cleavage of the double bonds, the formation of new epoxy linkages and the presence of hydroxyl groups. The change in chemical structure and physical properties of the soy polyol was further characterized and the results indicated a successful conversion with reduced unsaturation, increased hydroxyl number and increased viscosity. Polyurethane foam was prepared from soy-polyol using isocyanate and thermogravimetric analysis was used to study its thermal decomposition behaviour. Multiple transitions were identified in relation to depolymerization and bond dissociation. Density and compressive strength of the soy-foam were found to be satisfactory. An investigation of microstructure of soy foam by scanning electron microscope and X-ray computed tomography revealed the internal cell morphology and cell structure.