Lettuce plants as bioaccumulators of trace elements in a community of central Italy

A survey, based on the use of vascular plants to describe the distribution of selected elements (21 in total) was performed in 11 sites in the area of Castelfiorentino (Tuscany, Central Italy) differing for land use, from urban to industrial and rural areas. Lettuce plants grown under standardized conditions were positively used as biodeposimeters of airborne trace elements. Washing was found to be highly significant in reducing concentrations of many elements in the samples, suggesting a general surface contamination of leaves. The typical crustal element Al showed good correlations with Co, Fe, Li and V; on the contrary, Zn and Cd were intercorrelated and showed no connection with crustal indicators. Lead was still a relevant environmental presence, as the experiments were carried out before the ban of leaded gasoline. Source apportionment by factor analysis put in evidence a major contribution of crustal materials, followed by man-related activities; a minor role was ascertained for marine aerosol. A comparison was made between analytical data of lettuce plants grown in our experimental sites and a bulk of commercial lettuce purchased at a local supermarket. It should be stressed how Cu concentrations of commercial material were significantly higher than those found in our plants; this is likely caused by phytosanitary treatments.     

Secondary sexual characters signal fighting ability and determine social rank in Alpine ibex (Capra ibex)

Social dominance is a fundamental aspect of male evolutionary ecology in polygynous mammals because it determines access to estrous females. As it is rarely possible to monitor marked individuals of known morphology, little is known about the determinants of male dominance. We studied the social structure of Alpine ibex males in Gran Paradiso National Park, Italy in 2003, 2006, and 2007. Dominance interactions produced a linear social hierarchy. In ibex males, body mass and horn length are key traits in male-male combat, and both increase with age. We explored the links between age, body mass, horn length, and social rank. Ibex males showed much age-independent phenotypic heterogeneity and rapidly growing males reached high rank at a younger age than slow-growing males. Because there is no trade-off between horn growth and longevity, fast-growing males may face weak potential costs of rapid growth and high fitness benefit of achieving high rank. Violent interactions were more likely to occur between males similar in both mass and horn length, independently of age. We suggest that only high-quality individuals can afford a strategy of rapid growth for both secondary sexual characters, and likely reap substantial fitness benefits.     

Material and energy recovery in integrated waste management systems: the potential for energy recovery

This article is part of a set of six coordinated papers reporting the main findings of a research project carried out by five Italian universities on "Material and energy recovery in Integrated Waste Management Systems (IWMS)". An overview of the project and a summary of the most relevant results can be found in the introductory article of the series. This paper describes the work related to the evaluation of mass and energy balances, which has consisted of three major efforts (i) development of a model for quantifying the energy content and the elemental compositions of the waste streams appearing in a IWMS; (ii) upgrade of an earlier model to predict the performances of Waste-to-Energy (WtE) plants; (iii) evaluation of mass and energy balances of all the scenarios and the recovery paths considered in the project. Results show that not only the amount of material available for energy recovery is significantly higher than the Unsorted Residual Waste (URW) left after Separate Collection (SC), because selection and recycling generate significant amounts of residues, but its heating value is higher than that of the original, gross waste. Therefore, the energy potential of what is left after recycling is always higher than the complement to 100% of the Source Separation Level (SSL). Also, increasing SSL has marginal effects on the potential for energy recovery: nearly doubling SSL (from 35% to 65%) reduces the energy potential only by one fourth. Consequently, even at high SSL energy recovery is a fundamental step of a sustainable waste management system. Variations of SSL do bring about variations of the composition, heating value and moisture content of the material fed to WtE plants, but these variations (i) are smaller than one can expect; (ii) have marginal effects on the performances of the WtE plant. These considerations suggest that the mere value of SSL is not a good indicator of the quality of the waste management system, nor of its energy and environmental outcome. Given the well-known dependence of the efficiency of steam power plants with their power output, the efficiency of energy recovery crucially depends on the size of the IWMS served by the WtE plant. A fivefold increase of the amount of gross waste handled in the IWMS (from 150,000 to 750,000 tons per year of gross waste) allows increasing the electric efficiencies of the WtE plant by about 6-7 percentage points (from 21-23% to 28.5% circa).     

Material and energy recovery in integrated waste management systems. An evaluation based on life cycle assessment

This paper reports the environmental results, integrated with those arising from mass and energy balances, of a research project on the comparative analysis of strategies for material and energy recovery from waste, funded by the Italian Ministry of Education, University and Research. The project, involving the cooperation of five University research groups, was devoted to the optimisation of material and energy recovery activities within integrated municipal solid waste (MSW) management systems. Four scenarios of separate collection (overall value of 35%, 50% without the collection of food waste, 50% including the collection of food waste, 65%) were defined for the implementation of energetic, environmental and economic balances. Two sizes of integrated MSW management system (IWMS) were considered: a metropolitan area, with a gross MSW production of 750,000 t/year and an average province, with a gross MSW production of 150,000 t/year. The environmental analysis was conducted using Life Cycle Assessment methodology (LCA), for both material and energy recovery activities. In order to avoid allocation we have used the technique of the expansion of the system boundaries. This means taking into consideration the impact on the environment related to the waste management activities in comparison with the avoided impacts related to the saving of raw materials and primary energy. Under the hypotheses of the study, both for the large and for the small IWMS, the energetic and environmental benefits are higher than the energetic and environmental impacts for all the scenarios analysed in terms of all the indicators considered: the scenario with 50% separate collection in a drop-off scheme excluding food waste shows the most promising perspectives, mainly arising from the highest collection (and recycling) of all the packaging materials, which is the activity giving the biggest energetic and environmental benefits. Main conclusions of the study in the general field of the assessment of the environmental performance of any integrated waste management scheme address the importance of properly defining, beyond the design value assumed for the separate collection as a whole, also the yields of each material recovered; particular significance is finally related to the amount of residues deriving from material recovery activities, resulting on average in the order of 20% of the collected materials.     

A preliminary investigation into the physical and chemical properties of biomass ashes used as aggregate fillers for bituminous mixtures

Fly and bottom ashes are the main by-products arising from the combustion of solid biomass. Since the production of energy from this source is increasing, the processing and disposal of the resulting ashes has become an environmental and economic issue. Such ashes are of interest as a construction material because they are composed of very fine particles similar to fillers normally employed in bituminous and cementitious mixtures. This research investigates the potential use of ash from biomass as filler in bituminous mixtures. The morphological, physical and chemical characteristics of 21 different ashes and two traditional fillers (calcium carbonate and “recovered” plant filler) were evaluated and discussed. Leaching tests, performed in order to quantify the release of pollutants, revealed that five ashes do not comply with the Italian environmental re-use limits. Experimental results show a wide range of values for almost all the investigated properties and a low correlation with biomass type in terms of origin and chemical composition. Furthermore, sieving and milling processes were found to improve the properties of the raw material in terms of grading and sample porosity. The effectiveness of these treatments and the low content of organic matter and harmful fines suggest that most of the biomass ashes investigated may be regarded as potential replacements for natural filler in bituminous mixtures.     

Spatio-temporal dissolved oxygen dynamics in the Orbetello lagoon by fuzzy pattern recognition

This paper models the dissolved oxygen (DO) dynamics in the Orbetello lagoon as a function of the physico-chemical and ecological system variables, including the submerged vegetation, nutrients, and hydrodynamics. It should be viewed as the concluding sequel to a previous paper describing the dynamics of the lagoon ecosystem [Giusti, E., Marsili-Libelli, S., 2006. An integrated model for the Orbetello lagoon ecosystem, Ecol. Model. 196, 379–394] by introducing the missing DO dynamics. The model considers the oxygen demand originating from the decay of carbonaceous and nitrogenous compounds, as well as photosynthesis and natural reaeration by winds and currents as the oxygen producing processes. With a fixed-parameter set the model could accurately reproduce each single circadian DO cycle, but in the long run it failed to extend this fit and could not accommodate the large DO fluctuations induced by the seasonal variability. In order to enhance the model flexibility, a fuzzy pattern recognition algorithm was designed to classify the circadian DO patterns into four typical behaviours, related to the season, and estimate the corresponding parameters, with the overall model output being a fuzzy combination of these sets. The paper discusses several methods to patch the parameter sets and compares their performance in tracking long-term DO variations. A final assessment of the model validity is obtained by incorporating the whole DO dynamics (model, fuzzy pattern recognition and parameter combination) into the general lagoon model and producing a consistently correct series of DO daily distributions over a yearly cycle. Thus the paper contains both a practical and a methodological aspect. The practical one is the linking of all the lagoon dynamics to the dissolved oxygen kinetics in order to clarify to what extent macroalgae and macrophytes influence the oxygen balance. The methodological aspect consists of extending the validity of short-term models to long time-horizons through a patching technique supported by fuzzy pattern recognition.     

Assessment of the environmental conditions of the Sarno river basin (south Italy): a stream sediment approach

The Sarno river basin covers an area of 500 km² collecting the waters of Solofrana and Cavaiola tributaries. Originally it manly represents a source of livelihood for inhabitants by fishing and transporting goods; currently, the Sarno river, still partially used for irrigation, is affected by an extreme environmental degradation as a result of uncontrolled outflow of industrial waste. Within the framework of a wider geochemical prospecting project aiming at characterizing the whole territory of the Campania region, 89 stream sediment samples with a sampling density of 1 sample per 5 km² were collected in the river basin and analyzed by means of inductively coupled plasma-mass spectrometry in order to assess the environmental conditions at a regional scale. A GIS-aided technique, based on both the actual distribution of potentially harmful elements and their regional background values, was used to generate the maps of the contamination factors and of the contamination degrees for As, Cd, Cr, Cu, Hg, Pb and Zn. Furthermore, a factor analysis was performed to assess the nature and the extent of contamination sources for the river sediments. Results showed that the Sarno river basin could be divided in two “environmental status” units: one, low contaminated, corresponding to the hilly and mountain areas, and the second, from moderately to very highly contaminated, corresponding to the economically developed areas of the valley floor characterized by a high population density. This work was developed within a project that aims to investigate the relationships between environmental pollution and human health by analyzing environmental media (stream sediments, water, soil and vegetation) together with human hair of resident population. In this context, the spatial correlation between the extremely compromised environmental conditions of developed areas and the incidence rate of liver cancer in the same area was also explored posing the need of a careful costs/benefits analysis to assess whether the deterioration of the environment, that could adversely affect the conditions of public health, is worth the economic development.     

Soil Contribution to the Elemental Composition of Epiphytic Lichens (Tuscany, Central Italy)

Total concentrations of Al, Ba, Cd, Co, Cr, Cu, Fe, Mn, Mo, Pb, Sr, Ti, V and Zn in the epiphytic lichen Parmelia sulcata and superficial soils from 60 remote sampling sites in Tuscany (central Italy) were determined to evaluate the contribution of soil to the elemental composition of the lichen. The results showed that in the Mediterranean environment, the trace element content of unwashed lichen samples is greatly affected by soil contamination. However, despite the strong correlations between the concentrations of lithogene elements such as Al, Fe and Ti in P. sulcata, lichen levels of these elements were not at all linearly correlated with their concentrations in the soil, suggesting that dust contamination is highly variable and probably dependent on local site characteristics. All methods evaluated to minimize soil contamination indicated Cu, Pb and Zn as elements of atmospheric origin. However, while levels of Pb were similar to those reported for background areas, moderate pollution by Cu and Zn, probably from fertilizers used in agriculture, was revealed. For elements such as Cd and Mo, identified as atmophile, some uncertainty exists due to the fact that they are essential for lichen metabolism and accumulate intracellularly in lichens; they may therefore occur in soluble form in the lichen thallus.     

Assessment of noise level and noise propagation generated by light-lift helicopters in mountain natural environments

The use of helicopter rises discussion about environmental noise propagation especially when it operates in proximity of environmentally sensitive areas (ESAs) for an extended period because of its potential implications in wildlife behaviours. In order to support decisions on helicopter logging operation management in proximity of ESAs, this study focused on (i) analysing the noise spectrum of a light-lift helicopter during logging operations and on (ii) assessing the noise propagation in the surrounding environments. This study investigated a helicopter logging operation for wood fuel extraction in the eastern part of the Italian Alps. The potential disturbance area covered for the entire helicopter logging operation was evaluated by a specific GIS application according to hearing sensitivity of the most sensitive wildlife species in the study area (different strigiform species). The noise level at the ground appeared to be affected by the location regardless both the use of equivalent continuous sound pressures level dB(A) (LAeq) and the single-event level (SEL) noise metrics. The lowest values were recorded when the helicopter was flown over the sound meter level located under the forest canopy, while the highest was recorded when the helicopter was unhooking the loads at the landing. The GIS application highlighted the consistent of the exceeded noise area (weighted to strigiform hearing range and sensitivity) for the lower frequency bands (0.016–0.250 kHz). A more restricted exceeded noise area concerned instead the most sensitive frequency bands" for the strigiform (1–2 kHz).

Open image in new window

Graphical abstract ?