Monoterpene emissions and carbonyl compound air concentrations during the blooming period of rape (Brassica napus)

An increasing percentage of agricultural land in Germany is used for oil seed plants. Hence, rape has become an important agricultural plant (in Saxony 1998: 12% of the farmland) in the recent years. During flowering of rape along with intensive radiation and high temperatures, a higher production and emission of biogenic VOC was observed. The emissions of terpenes were determined and more importantly, high concentrations of organic carbonyl compounds were observed during this field experiment. All measurements of interest have been carried out during two selected days with optimal weather conditions. It is found that the origin or the mechanism of formation of different group of compounds had strong influence on the day to day variation of their concentrations. The emission flux of terpenes from flowering rape plants was determined to be 16–32 μg h⁻¹ m⁻² (30–60 ng h⁻¹ per g dry plant––540–1080 ng h⁻¹ per plant), in total. Limonene, -thujene and sabinene were the most important compounds (about 60% of total terpenes). For limonene and sabinene reference emission rates (M_S) and temperature coefficients were determined: β_limonene=0.108 K⁻¹ and M_S=14.57 μg h⁻¹ m⁻²; β_sabinene=0.095 K⁻¹ and M_S=5.39 μg h⁻¹ m⁻².

The detected carbonyl compound concentrations were unexpectedly high (maximum formaldehyde concentration was 18.1 ppbv and 3.4 ppbv for butyraldehyde) for an open field. Possible reasons for these concentrations are the combination of primary emission from the plants induced by high temperature and high ozone stress, the secondary formation from biogenically and advected anthropogenically emitted VOC at high radiation intensities and furthered by the low wind speeds at this time.     

Monoterpene emissions and carbonyl compound air concentrations during the blooming period of rape (Brassica napus)

An increasing percentage of agricultural land in Germany is used for oil seed plants. Hence, rape has become an important agricultural plant (in Saxony 1998: 12% of the farmland) in the recent years. During flowering of rape along with intensive radiation and high temperatures, a higher production and emission of biogenic VOC was observed. The emissions of terpenes were determined and more importantly, high concentrations of organic carbonyl compounds were observed during this field experiment. All measurements of interest have been carried out during two selected days with optimal weather conditions. It is found that the origin or the mechanism of formation of different group of compounds had strong influence on the day to day variation of their concentrations. The emission flux of terpenes from flowering rape plants was determined to be 16–32 μg h⁻¹ m⁻² (30–60 ng h⁻¹ per g dry plant––540–1080 ng h⁻¹ per plant), in total. Limonene, α-thujene and sabinene were the most important compounds (about 60% of total terpenes). For limonene and sabinene reference emission rates (M_S) and temperature coefficients were determined: β_limonene=0.108 K⁻¹ and M_S=14.57 μg h⁻¹ m⁻²; β_sabinene=0.095 K⁻¹ and M_S=5.39 μg h⁻¹ m⁻².The detected carbonyl compound concentrations were unexpectedly high (maximum formaldehyde concentration was 18.1 ppbv and 3.4 ppbv for butyraldehyde) for an open field. Possible reasons for these concentrations are the combination of primary emission from the plants induced by high temperature and high ozone stress, the secondary formation from biogenically and advected anthropogenically emitted VOC at high radiation intensities and furthered by the low wind speeds at this time.     

Environmental risk assessment of genetically modified plants - concepts and controversies

Purpose

The purpose of the study is the enhancement of criticality assessments for resources in order to address function specific factors like dissipation, recycling, bio-activity and toxicity. The developed methodology is applied to platinum-containing cytostatic drugs and automotive catalytic converters.

Methods

The study is methodically based on an analysis of resource specific factors like exploration rates, reserves-to-production ratio and regional distribution of exploration areas as well as on the investigation of product/functional depending factors like recycling rates, dissipation rates, bio-diversity and toxicity. Taking into account that economic and ecological risks may occur at any stage of the supply, consumption and dissipation processes, the whole life cycles of the two analyzed products (cytostatic drugs and automotive catalytic converters) are considered. As an approach to reduce potential economic and ecological risks the study is especially focused on recycling strategies.

Background

In order to get a better understanding of platinum as an essential resource for the development of our society the history and the cultural impact of the term "resource" are introduced.

Results & Discussion

The availability of platinum is crucial for several products of our modern society. Areas of application are e.g. jewellery, automotive catalytic converters, investments (coins, bars), computers, mobile devices, fertilizers and cytostatic drugs. Economic risks are caused by limited sources and dynamic demand of new application areas like fuel cells and drugs. Platinum-containing drugs are used for the treatment of several kinds of cancer such as testicular, breast, colon and prostate. Currently the pharmaceutical industry requires 6,9 tons per year (3 percent of the total demand of platinum). Due to the improvement of medical standards and the ageing society, especially in developing countries, the demand of platinum-containing drugs will rise significantly. The dissipation of toxic soluble salts and the lack of advanced waste-water treatment and recycling systems is a problem of the usage of platinum-containing drugs. Compared with cytostatic drugs (14.6 kg/a for Germany) the dissipation of platinum particles of mobile catalytic converters is much higher (5-20 tons/a only in North America, Europe and Japan; 184,2 kg/a in Germany). On the other hand the emission of platinum nano-particles of automotive catalytic converters seems less critical. Furthermore advanced recycling technologies are already available for them.

Conclusions

The evaluation of resources has to consider resource specific and functional depending factors. In order to reduce economic and ecological risks of the dissipation of platinum salts in cytostatic drugs three principle options can be identified: the development of ecologically compatible and cost-effective substitutes, efficient recycling systems and future-oriented sanitary-systems as well as waste-water treatment facilities, which are able to separate platinum salts. Concerning the dissipation of platinum particles of mobile converters relevant research questions are the identification of adequate substitutes as well as the extension of recycling capacities.

Recommendations and perspectives

The study demonstrates a research gap concerning substitutes for automotive catalytic converters as well as for platinum-containing cytostatic drugs. The development and implementation of recycling concepts, technologies and capacities to reuse platinum as a secondary resource is an essential issue. As a consequence the economic and ecological risks can be reduced by increasing the resource efficiency. Special research has to be done concerning the development of future-oriented sanitary-systems and waste-water treatment facilities in order to separate platinum in waste water. Furthermore, if the future demand of new products like fuel cells is considered, a resource conflict concerning the potential functional applications will be evident. In order to address these challenges the criticality assessment has to be enhanced by ethic and social factors.     

Discriminant analysis for assessing the value of amniotic fluid microvillar enzymes in the prenatal diagnosis of cystic fibrosis

We have analysed the sensitivity, specificity, and reliability of biochemical diagnosis based on microvillar membrane enzyme assay and using discriminant analysis in amniotic fluid samples obtained from 54 pregnancies at high risk for cystic fibrosis and 125 normal pregnancies. Our results show that amniotic fluid trehalase, alkaline phosphatase, alkaline phosphatase isoenzymes and gamma-glutamyltransferase enzyme activities measured during 16–20 gestational weeks, in spite of their non-specificity for cystic fibrosis, have a very good predictive value for fetal cystic fibrosis or exclude the possibility of the disease. Overall enzyme activity analysis provided over 90 per cent reliability of the method.     

A new ecotoxicological test method for genetically modified plants and other stressors in soil with the black fungus gnat <Emphasis Type="Italic">Bradysia impatiens</Emphasis> (Diptera): current status of test development and dietary effects of azadirachtin on larval development and emergence rate

Background

Few suitable and standardized test methods are currently available to test the effects of genetically modified plants (GMP) on non-target organisms. To fill this gap and improve ecotoxicological testing for GMP, we developed a new soil ecotoxicological test method using sciarid larvae as test organisms.

Results

Bradysia impatiens was identified as a candidate species. Species of the genus Bradysia occur in high numbers in European agroecosystems and B. impatiens can be reared in the laboratory in continuous culture. A functional basic test design was successfully developed. Newly hatched larvae were used as the initial life stage to cover most of the life cycle of the species during the test. Azadirachtin was identified as a suitable reference substance. In several tests, the effects of this substance on development time and emergence rate varied for different temperatures and test substrates. The toxicity was higher at 25 °C compared to 20 °C and in tropical artificial soil compared to coconut fiber substrate.

Conclusions and outlook

Results suggest that the developed test system is suitable to enter a full standardization process, e.g., via the Organisation for Economic Co-operation and Development. Such a standardization would not only assist the risk assessment of GMP, but could include other stressors such as systemic pesticides or veterinary pharmaceuticals reaching the soil, e.g., via spreading manure. The use of sciarid flies as test organisms supports recommendations of EFSA, which stressed the ecological role of flies and encouraged including Diptera into test batteries.

     

Zur Kreuzresistenz tumorresistenter Ratten

The Science of Nature -     

Measured and predicted volatilisation fluxes of PCBs from contaminated sludge-amended soils

A laboratory experiment was carried out to measure volatilisation fluxes of polychlorinated biphenyls (PCBs) from sewage sludge-amended soils. The most commonly practised methods of applying sludge to agricultural land in the UK, namely, surface application, ploughing in to soil and subsurface injection, were simulated inside glass experimental chambers using an anaerobically digested sludge and a sandy loam soil. Humidified air was blown over the surface of the soil/sludge in the chambers for a period of 32 days, in order to sample a sufficient air volume to detect the volatilising PCBs. The resulting PCB volatilisation fluxes from the different sludge application methods were quantified and compared. Volatilisation fluxes of individual congeners were generally highest for the surface sludge (1-cm depth) application and slightly lower for the plough layer (5-cm depth) application. Fluxes from the subsurface layer of sludge (5-cm depth) were only quantified for the lightest congeners near to the end of the experimental run-time. Results from a multiple regression analysis showed that volatilisation fluxes of PCBs from the surface application are highly dependent on both the sludge concentration and the log of the octanol-air partition coefficient (K(OA)). A well-known soil volatilisation model, developed by Jury et al., was adapted and used to predict fluxes for the different sludge application methods during the experiment. The model predicted volatilisation fluxes that were reasonably comparable to measured fluxes for some congeners, but for others predicted fluxes that were more than an order of magnitude lower than measured fluxes. The model predicted similar loss kinetics to those observed in the experiment. Possible reasons for the dissimilarity between measured and predicted fluxes include inaccuracies in model input parameters and the fact that the models were not developed for predicting fluxes from sludge-amended soils.