Characterization of municipal solid waste combustion in a grate furnace

The objective of this paper is to evaluate the combustion process of municipal solid waste combustion in a grate furnace both experimentally and numerically by using data of a reference experiment with over-stoichiometric primary air supply. Measurements were carried out inside the combustion chamber of a pilot plant by monitoring temperatures and sampling gaseous combustion products along the bed surface. The data were assessed using elemental and energy balances. Experimental data of the axial temperature profiles of the flue gas, the fuel bed and the grate bars, as well as local gas flows and the flue gas composition measured above the fuel bed along the grate were used to describe the conversion process, including drying and carbon burnout. These data served as input to model the thermo- and fluid dynamic processes of the gas phase above the bed inside the combustion chamber. For this purpose the commercial code FLUENT was employed to carry out the simulations. Thus, the turbulent temperature, flow and species distributions in the combustion chamber of the pilot waste incinerator TAMARA were predicted. The results of the FLUENT modeling showed that under the prevailing conditions the flue gas burnout is almost completed before entering the first flue due to high temperatures, effective mixing and sufficient residence times of the flue gas inside the combustion chamber. This agrees well with the experimental results inside the first flue. On the basis of the above mentioned results, design and parametric studies can be carried out in a more efficient way by saving cost and time.     

Formation and destruction of PCDD/F inside a grate furnace

Formation and destruction of polychlorinated dibenzo-p-dioxins and dibenzofurans PCDD/F during the combustion process was investigated experimentally in a pilot plant. All important process steps like the burnout of the fuel bed on the grate, the burnout of the flue gas inside the combustion chamber, the heat recovery in a boiler as well as influences of the fuel composition are described in detail.

High concentrations especially of PCDF are formed during the burnout of the fuel bed. The formation reaction is mainly influenced by the fuel composition and the burnout characteristic of the fuel bed. Fuels with low chlorine and low metal content (Cu) result only in negligible concentrations of PCDD/F.

Under stable combustion conditions characterized by an excellent flue gas burnout PCDD/F will almost be completely destroyed already inside the combustion chamber. “Cold strands” of unburned flue gas (high CO concentrations) caused by disturbed combustion conditions will result in high concentrations of PCDD and especially of PCDF in the raw gas.

A second place of PCDD/F formation is the well-known boiler section. Here fly ash deposits containing residual carbon (mainly soot particles) are the source for the formation reaction. Under stationary effective combustion conditions, they are dominant for PCDD/F concentrations in the raw gas over a very long period of time.

Stationary efficient flue gas burnout (especially soot) together with effective boiler cleaning will guaranty low concentrations of PCDD/F in the flue gas in front of the flue gas cleaning system.     

Fate of antimony in municipal solid waste incineration

The average antimony concentration in municipal solid waste is estimated to be about 10-60 ppm. Thermodynamical models predict a volatile behavior for antimony compounds, yet literature mass balances show that about 50% of the antimony input remains in the grate ashes. This fact can be explained by the formation of thermally stable antimonates in the fuel bed due to interactions with alkali or earth-alkali metals. Thermogravimetric experiments revealed an increased thermal stability for antimony oxide in presence of oxygen and calcium oxide. Spiking experiments on the test incinerator TAMARA showed that chlorination processes have a strong effect on antimony volatilization whereas high fuel-bed temperatures and addition of antimony oxide only have a moderate effect. In the grate ashes, antimony shows a pH-depending leaching property, which is typical for anionic species. This fact supports the thesis that antimony is present in the grate ashes in an anionic speciation.     

Detektorapparatur zur Messung von Überführungszahlen mit Hilfe von α- und schwachen β-Strahlern

The Science of Nature -     

European Union waste management strategy and the importance of biogenic waste

In the European Union (EU), waste management is almost totally regulated by EU directives, which supply a framework for national regulations. The main target in view of sustainability is the prevention of direct disposal of reactive waste in landfills. The tools to comply with these principles are recycling and material recovery as well as waste incineration with energy recovery for final inertization. The adaptation of the principles laid down in EU directives is an ongoing process. A number of countries have already enacted respective national regulations and their realization shows that recycling and incineration are not in competition but are both essential parts of integrated waste management systems. In the EU, the amount of residual waste available for energy recovery can supply approximately 1% of the primary energy demand. About 50% of the energy inventory of municipal solid waste (MSW) in most EU countries is of biogenic origin, and MSW is to the same extent to be looked upon as regenerative fuel. Hence part of the CO₂ released from waste incineration is climate neutral. In the EU, this share could produce savings of the order of 1% of annual CO₂ emissions if energy from MSW replaced that derived from fossil fuel.     

Decomposition of organohalogen compounds in municipal solid waste incineration plants. Part I: Chlorofluorocarbons

Disposal of chlorofluorocarbons in a municipal solid waste incinerator has been studied. Destruction of CFC-11 (trichloromonofluoromethane) and CFC-113 (trichlorotrifluoroethane) was found to be better than 99.9%. Neither emission limits for hydrogen chloride or hydrogen fluoride specified in the 17^th BImSchV are exceeded during CFC incineration nor could formation of toxic halogenated organic compounds like dibenzo-p-dioxins or dibenzofurans be observed.     

Influence of bromine on metal volatilization in waste combustion

Co-combustion tests of municipal solid waste and bromine-containing waste plastics have been performed in the TAMARA test incinerator in order to investigate the fate of bromine in waste combustion. HBr is the main bromine combustion product. Approximately 50% of the bromine inventory stays in the grate ashes, which is much more than is found for chlorine. The percentage of bromine transferred into the fly ash also exceeds that of chlorine. There is a strong indication that bromine has a promoting effect upon the volatility of most of the heavy metals that are typically mobilized by chlorine. Received: February 2, 2000 / Accepted: March 3, 2000