模糊集值统计法在煤矿安全评价指标权值中的应用

应用模糊集值统计的理论 ,对煤矿安全评价中具有随机性和模糊性的指标进行数学分析 ,进一步改进了其权值的确定方法 ,使其更加符合实际情况 ,并对由此得出的权值进行了可靠性分析。通过实例表明 ,该方法克服了经典统计法的不足 ,提高了煤矿安全评价的实用性和科学性     

石灰性土壤中高效解磷细菌菌株的分离、筛选及组合

对石灰性土壤样品进行了解磷细菌的分离和筛选,得到具有明显溶磷圈的解磷细菌71株.分析了菌株分泌磷酸酶、释放速效磷及pH降低等综合因素和特征,研究了菌株生长动态.最后筛选出解磷能力较强且无拮抗反应的6株解磷细菌,并将其组合成为解磷细菌菌群.图8表2参17     

地方政府地震风险预防与应急准备:实践、挑战及对策——基于广东河源市的分析

地震是广东河源市常见的自然灾害,频发的地震和作为城市重大风险源的新丰江水库可能诱发地震的双重影响对河源市地震应急预防准备工作提出严峻挑战,提升河源市政府和相关部门的地震应急能力尤为重要。根据对河源市地震应急预防准备工作现状的实地调研访谈、问卷调查和分析,阐述了河源市在地震应急预防准备工作进行的实践探索、待改善的方面,在借鉴国内外经验基础上,提出了加强和改进河源市地震预防与应急准备工作的对策建议。     

污泥基生物炭提升活性污泥系统处理性能

对污泥基生物炭提升活性污泥系统处理性能进行探讨,将活性炭和污泥基生物炭分别投入A²O工艺厌氧池活性污泥,发现其对COD削减率最高分别为72.9%和41.1%,均能有效削减,生物炭对TN削减率最高为74.1%,优于活性炭.表征显示污泥基生物炭上更易附着活性污泥且比表面积更大.在A²O小试厌氧池中以"1次/污泥龄"为频率投加活性炭、污泥基生物炭和脱脂污泥基生物炭,结果发现:投加污泥基生物炭对COD、TN、TP的削减均优于活性炭,投加脱脂污泥基生物炭对COD、TN的削减与投加活性炭相当,对TP平均削减率高达85.6%,优于活性炭,表明生物炭处理(BT)工艺比粉末活性炭处理(PACT)工艺处理生活污水能力更强,脱脂污泥基生物炭作为污泥脂质提取后的副产品更经济.     

江西定南县离子型稀土尾矿周边水体氮污染状况与分布特征

为探究"稀土王国"江西省赣南地区离子型稀土矿对周边水体环境的影响,以离子型稀土矿分布密集区定南县濂江月子河流域和龙迳河龙头流域为研究对象,综合分析研究区特征污染物ρ（NH₄+-N）空间分布特征,采用相关性分析和主成分分析揭示其主要污染来源及影响因素.结果表明:①离子型稀土矿停产整顿半年后,濂江月子河流域和龙迳河龙头流域ρ（NH₄+-N）超过1.00和2.00 mg/L的采样点分别达72%和68%;pH范围为2.95~7.66,平均值分别为6.23和5.53,水体总体上偏酸性;ρ（TN）、ρ（NH₄+-N）、EC与ρ（NO₃--N）变异系数较大,均介于0.80~1.50之间.②相关性分析结果显示,ρ（NH₄+-N）与ρ（TN）、EC均呈极显著正相关（P < 0.01）;ρ（NH₄+-N）与pH呈显著负相关（P < 0.05）.③流经稀土尾矿区的水体中ρ（NH₄+-N）随距离增加呈现明显的空间梯度分布特征,即距稀土矿区边界200 m处水体中ρ（NH₄+-N）最高（12.20~200.00 mg/L）,其次为1.15 km内（3.69~11.80 mg/L）及3.5 km以上水体（0.80~1.51 mg/L）,矿区周边未受到采矿活动影响的水体中ρ（NH₄+-N）最低（0.03~0.15 mg/L）.④PCA结果表明,2条河流的主要环境影响因子为ρ（TN）、ρ（NH₄+-N）、pH和EC,主要受到周边稀土矿山尾矿的强烈影响.研究显示,离子型稀土矿原位浸矿开采停产半年后,重点小流域水体中ρ（NH₄+-N）高概率超标的现状仍然存在,受稀土开采活动影响较大.建议进一步开展重点小流域NH₄+-N剩余"库容"精算和矿山周边地表水定期监测.      

北京10个常绿树种颗粒物吸附能力研究

大气中颗粒物PM(particulate matter)不仅造成环境污染,还对人体造成严重的危害.城市绿色植物作为大气过滤器,能够有效地提高城市空气质量,保护人体健康.因此了解不同树种对空气颗粒物的吸附滞纳作用是必要的.以北京植物园10种常绿植被为研究对象,应用空气气溶胶再发生器(QRJZFSQ-I)测定了北京市常见6种乔木和4种灌木叶片对空气总悬浮颗粒物(TSP)、PM10、PM2.5和PM1.0的吸附能力.结果表明:1不同树种叶片表面附着颗粒物的能力差异明显,最高的是雪松(Cedrus deodara)和油松(Pinus tabuliformis),吸附量分别是(18.95±0.71)μg·cm-2和(14.61±0.78)μg·cm-2,冷杉(Abies fabri)最小,为(8.02±0.4)μg·cm-2;2不同树种叶片单位面积对不同颗粒物的附着能力也存在差异,附着PM10能力最强的是油松和雪松,附着PM2.5能力最强的是雪松、铺地柏(Juniperus procumbens)、龙柏(Juniperus chinensis cv.kaizuka)和油松,附着PM1.0能力最强的是雪松、铺地柏、冷杉和油松;3不同月份叶片上附着的各粒级颗粒物(PM10、PM2.5)占TSP的比例不同.其中PM10在4~6月之间主要表现两种变化趋势,一是先上升后下降,主要为灌木树种;二是逐渐上升,主要的树种是乔木树种.而PM2.5则没有这种明显的变化趋势.     

Low-carbon transition of iron and steel industry in China: Carbon intensity, economic growth and policy intervention

As the biggest iron and steel producer in the world and one of the highest CO₂ emission sectors, China's iron and steel industry is undergoing a low-carbon transition accompanied by remarkable technological progress and investment adjustment, in response to the macroeconomic climate and policy intervention. Many drivers of the CO₂ emissions of the iron and steel industry have been explored, but the relationships between CO₂ abatement, investment and technological expenditure, and their connections with the economic growth and governmental policies in China, have not been conjointly and empirically examined. We proposed a concise conceptual model and an econometric model to investigate this crucial question. The results of regression, Granger causality test and impulse response analysis indicated that technological expenditure can significantly reduce CO₂ emissions, and that investment expansion showed a negative impact on CO₂ emission reduction. It was also argued with empirical evidence that a good economic situation favored CO₂ abatement in China's iron and steel industry, while achieving CO₂ emission reduction in this industrial sector did not necessarily threaten economic growth. This shed light on the dispute over balancing emission cutting and economic growth. Regarding the policy aspects, the year 2000 was found to be an important turning point for policy evolution and the development of the iron and steel industry in China. The subsequent command and control policies had a significant, positive effect on CO₂ abatement.     

Pd-MnO2 nanoparticles/TiO2 nanotube arrays (NTAs) photo-electrodes photo-catalytic properties and their ability of degrading Rhodamine B under visible light

Pd-MnO_2/TiO_2 nanotube arrays(NTAs) photo-electrodes were successfully fabricated via anodization and electro deposition subsequently; the obtained Pd-MnO_2/TiO_2 NTAs photo electrodes were analyzed by scanning electron microscopy(SEM), X-ray diffraction(XRD) and characterized accordingly. Moreover, the light harvesting and absorption properties were investigated via ultraviolet–visible diffuse reflectance spectrum(DRS); photo degradation efficiency was investigated via analyzing the photo catalytic degradation of Rhodamine B under visible illumination(xenon light). The performed analyses illustrated that Pd-MnO_2 codoped particles were successfully deposited onto the surface of the TiO_2 nanotube arrays;DRS results showed significant improvement in visible light absorption which was between400 and 700 nm. Finally, the photo catalytic degradation efficiency results of the designated organic pollutant(Rhodamine B) illustrated a superior photocatalytic(PC) efficiency of approximately 95% compared to the bare TiO_2 NTAs, which only exhibited a photo catalytic degradation efficiency of approximately 61%, thus it indicated the significant enhancement of the light absorption properties of fabricated photo electrodes and their yield of UOH radicals.     

HAZOP分析在编制操作规程上的应用

结合实例分析,介绍如何将HAZOP分析方法引入到操作规程的编写过程当中,从而提升操作规程的有效性。     

哈尼河水源环境风险评估与防范措施的研究

哈尼河是通化市50万人口的重要供水水源地,针对哈尼河水源环境风险进行识别、评估,从而提出风险防范措施,确保水源地水质安全.