Comparison of marginal abatement cost curves for 2020 and 2030: longer perspectives for effective global GHG emission reductions

This study focuses on analyses of greenhouse gas (GHG) emission reductions, from the perspective of interrelationships among time points and countries, in order to seek effective reductions. We assessed GHG emission reduction potentials and costs in 2020 and 2030 by country and sector, using a GHG emission reduction-assessment model of high resolution regarding region and technology, and of high consistency with intertemporal, interregional, and intersectoral relationships. Global GHG emission reduction potentials relative to baseline emissions in 2020 are 8.4, 14.7, and 18.9 GtCO₂eq. at costs below 20, 50, and 100 $/tCO₂eq., corresponding to +19, −2, and −7 %, respectively, relative to 2005. The emission reduction potential for 2030 is greater than that for 2020, mainly because many energy supply and energy-intensive technologies have long lifetimes and more of the current key facilities will be extant in 2020 than in 2030. The emission reduction potentials in 2030 are 12.6, 22.0, and 26.6 GtCO₂eq. at costs below 20, 50, and 100 $/tCO₂eq., corresponding to +19, −2, and −7 %, respectively, relative to 2005. The emission reduction potential for 2030 is greater than that for 2020, mainly because many energy supply and energy-intensive technologies have long lifetimes and more of the current key facilities will be extant in 2020 than in 2030. The emission reduction potentials in 2030 are 12.6, 22.0, and 26.6 GtCO₂eq. at costs below 20, 50, and 100 /tCO₂eq., corresponding to +33, +8, and −3 %, respectively, relative to 2005. Global emission reduction potentials at a cost below 50 $/tCO₂eq. for nuclear power and carbon capture and storage are 2.3 and 2.2 GtCO₂eq., respectively, relative to baseline emissions in 2030. Longer-term perspectives on GHG emission reductions toward 2030 will yield more cost-effective reduction scenarios for 2020 as well.     

Roadside Rhododendron pulchrum leaves as bioindicators of heavy metal pollution in traffic areas of Okayama, Japan

The leaves of roadside Rhododendron pulchrum Sweet were examined as a bioindicator of traffic-related heavy metal pollution in Okayama. Total contents of heavy metals in roadside soil and the R. pulchrum leaves were determined. Results of correlation analyses showed significant correlations among Pb, Ni, and Zn contents of roadside soil and leaf samples. These results suggest that R. pulchrum is a useful bioindicator of heavy metal pollution in traffic areas. To identify traffic-related heavy metal pollution sources, traffic-related materials such as tires, asphalt pavement, and road paint were collected and analyzed. The results of analyses of our data show that Zn is emitted mainly from the abrasion of tires; Cr is emitted mainly from wear of the asphalt pavement. Furthermore, the respective lead isotope ratios in R. pulchrum leaves, soil, roadside dust, and traffic-related materials were measured using inductively coupled plasma mass spectrometry. The isotopic compositions of lead in R. pulchrum leaves were 207Pb/206Pb = 0.861-0.871 and 208Pb/206Pb = 2.093-2.127, which agrees well with ratios in automobile wheel balance weights, suggesting that lead-containing products associated with automobiles, such as wheel balance weights, contribute to traffic-related lead pollution.     

Influence of oxygen flow rate on reaction rate of organic matter in leachate from aerated waste layer containing mainly incineration ash

It is known that aeration reduces rapidly the concentration of organic matter in leachate. However, the oxygen flow rate required to attain a certain reaction rate of organic matter should be carefully estimated. In this study, using the oxygen ratio (the ratio of oxygen flow rate by aeration to oxygen consumption rate of waste layer) as a parameter, the reaction rate of organic matter in leachate from landfilled incineration ash and incombustible waste upon aeration was evaluated. Total organic carbon (TOC) in the leachate was reduced rapidly when the oxygen ratio was high. The decomposition rate exceeded the elution rate of TOC in the leachate from the waste layer for several days when the oxygen ratio was above 10². The results indicate that the oxygen ratio can be used as a parameter for the aeration operation in actual landfill sites, to rapidly stabilize organic matter in leachate.     

Occurrence of phenols in leachates from municipal solid waste landfill sites in Japan

The concentrations of 41 phenols in leachates from 38 municipal solid waste (MSW) landfill sites in Japan were measured. The main phenols detected in leachates were phenol, three cresols, 4-tert-butylphenol, 4-tertoctylphenol, 4-nonylphenol, bisphenol A, and some chlorophenols. The concentration levels of phenols were affected by the pH values of the leachates and the different types of landfill waste. The origins of phenol and p-cresol were considered to be incineration residues, and the major origin of 4-tert-butylphenol, bisphenol A, and 2,4,6-trichlorophenol was considered to be solidified fly ash. In contrast, the major origins of 4-tert-octylphenol and 4-nonylphenol were considered to be incombustibles. The discharge of leachates to the environment around MSW landfill sites without water treatment facilities can cause environmental pollution by phenols. In particular, the disposal of incineration residues including solidified fly ash and the codisposal of solidified fly ash and incombustibles might raise the possibility of environmental pollution. Moreover, the discharge of leachates at pH values of 9.8 or more could pollute the water environment with phenol. However, phenol, 4-nonylphenol, and bisphenol A can be removed to below the con centration levels that impact the environment around landfill sites by a series of conventional water treatment processes.     

Water Management Decision Making in the Face of Multiple Forms of Uncertainty and Risk

In the Wasatch Range Metropolitan Area of Northern Utah, water management decision makers confront multiple forms of uncertainty and risk. Adapting to these uncertainties and risks is critical for maintaining the long‐term sustainability of the region's water supply. This study draws on interview data to assess the major challenges climatic and social changes pose to Utah's water future, as well as potential solutions. The study identifies the water management adaptation decision‐making space shaped by the interacting institutional, social, economic, political, and biophysical processes that enable and constrain sustainable water management. The study finds water managers and other water actors see challenges related to reallocating water, including equitable water transfers and stakeholder cooperation, addressing population growth, and locating additional water supplies, as more problematic than the challenges posed by climate change. Furthermore, there is significant disagreement between water actors over how to best adapt to both climatic and social changes. This study concludes with a discussion of the path dependencies that present challenges to adaptive water management decision making, as well as opportunities for the pursuit of a new water management paradigm based on soft‐path solutions. Such knowledge is useful for understanding the institutional and social adaptations needed for water management to successfully address future uncertainties and risks.     

Reduction in toxicity and generation of slag in secondary lead process

This paper focuses on the improvement of a secondary lead recycling processing plant, giving special attention to the generation of lead slag. The study was conducted using two different industrial rotary furnaces that together produce three different slag types, which depend on charge composition and lead-containing raw material obtained from a lead-acid battery recycling process. First, characterization of three slag types from different batches was performed, and such characterization included chemical, mineralogical, and structural analyses. By analyzing these data and the operational conditions of the process, it was possible to identify certain deficiencies in the recycling process and implement modifications in order to improve it. A reduction of up to 25% in the quantity of slag generated could be achieved with certain charges. In addition to this process improvement, it was possible to reduce the toxicity of the slag produced when processing a charge containing the same proportion of paste and grid as the lead-acid battery. This improvement lessens the overall environmental impact of the process. By applying this methodology, it was possible to determine some principles of cleaner production in the lead recycling process. So, waste generation could be reduced via improvements in the process and slag characteristics were modified to decrease its toxicity (as determined by lead content in leaching tests).