排序方式: 共有160条查询结果,搜索用时 15 毫秒
1.
Determining a remeasurement frequency of variables over time is required in monitoring environmental systems. This article
demonstrates methods based on regression modeling and spatio-temporal variability to determine the time interval to remeasure
the ground and vegetation cover factor on permanent plots for monitoring a soil erosion system. The spatio-temporal variability
methods include use of historical data to predict semivariograms, modeling average temporal variability, and temporal interpolation
by two-step kriging. The results show that for the cover factor, the relative errors of the prediction increase with an increased
length of time interval between remeasurements when using the regression and semivariogram models. Given precision or accuracy
requirements, appropriate time intervals can be determined. However, the remeasurement frequency also varies depending on
the prediction interval time. As an alternative method, the range parameter of a semivariogram model can be used to quantify
average temporal variability that approximates the maximum time interval between remeasurements. This method is simpler than
regression and semivariogram modeling, but it requires a long-term dataset based on permanent plots. In addition, the temporal
interpolation by two-step kriging is also used to determine the time interval. This method is applicable when remeasurements
in time are not sufficient. If spatial and temporal remeasurements are sufficient, it can be expanded and applied to design
spatial and temporal sampling simultaneously. 相似文献
2.
Irradiation with ultrasound (US) and use of an enzyme (E) as pretreatment techniques were carried out to treat a complex effluent (distillery wastewater). These two techniques have been used alone as well as in combination and the efficacy of these techniques was tested by subjecting the effluent to subsequent aerobic biological oxidation (AO). When used alone, US exposure for 30 min and 2 h yielded the best COD reduction during the aerobic oxidation step (US+AO). For the enzyme when used alone, a pH value of 4.8 (corresponding to the optimum pH of the enzyme), a dose of 50 U and a pretreatment time of 24 h yielded better COD removal efficiency as compared to untreated effluent (aerobic oxidation alone). When used in combination, ultrasound followed by enzymatic pretreatment (US+E+AO) yielded the best COD removal efficiencies during aerobic oxidation as compared to the other combinations tested for the treatment of the distillery wastewater. A 4-fold increase in the initial oxidation rate was observed over the untreated batch for the integrated technique (US+E+AO). On the basis of the variation in the values of the biokinetic parameters it can be concluded that the type of pretreatment scheme affects the subsequent rate of the aerobic oxidation significantly. 相似文献
3.
Kumar S Bhattacharyya JK Vaidya AN Chakrabarti T Devotta S Akolkar AB 《Waste management (New York, N.Y.)》2009,29(2):883-895
Solid waste management is one of the most challenging issues in urban cities, which are facing a serious pollution problem due to the generation of huge quantities of solid waste. This paper presents an assessment of the existing situation of municipal solid waste management (MSWM) in major cities in India. The quantity and composition of MSW vary from place to place, and bear a rather consistent correlation with the average standard of living. Extensive field investigations were carried out for quantification, analysis of physical composition, and characterization of MSW in each of the identified cities. The MSW management status (per the MSW Rules, 2000) has also been assessed, and an action plan for better management has been formulated; both are presented in this paper. Studies carried out in 59 selected cities in India have revealed that there are many shortcomings in the existing practices used in managing the MSW. These shortcomings pertain mainly to inadequate manpower, financial resources, implements, and machinery required for effectively carrying out various activities for MSWM. To overcome the deficiencies in the existing MSWM systems, an indicative action plan has been presented incorporating strategies and guidelines. Based on this plan, municipal agencies can prepare specific action plans for their respective cities. 相似文献
4.
Viana RB Cavalcante RM Braga FM Viana AB de Araujo JC Nascimento RF Pimentel AS 《Environmental monitoring and assessment》2009,151(1-4):317-325
The cancer risks (CR) by oral ingestion, dermal absorption, and inhalation exposure of trihalomethanes (THM) from tap water of ten districts in Fortaleza, Brazil were estimated. The mean levels of THM compounds were obtained in Fortaleza tap water as follow: 63.9 microg L(-1) for chloroform (CHCl(3)), 40.0 microg L(-1) for bromodichloromethane (CHBrCl(2)), and 15.6 microg L(-1) for dibromochloromethane (CHBr(2)Cl). Bromoform (CHBr(3)) was not detected. The mean CR for THMs in tap water is 3.96 x 10(-4). The results indicate that Fortaleza residents have a higher CR by inhalation than dermal absorption and oral ingestion. The CR for CHCl(3) contributes with 68% as compared with the total CR, followed by CHBrCl(2) (21%), and CHBr(2)Cl (11%). The hazard index (HI) is about ten times lower than unity, not indicating non-cancer effects. 相似文献
5.
Combination of ozonation with conventional aerobic oxidation for distillery wastewater treatment 总被引:1,自引:0,他引:1
Laboratory-scale experiments were conducted in order to investigate the effect of ozone as pre-aerobic treatment and post-aerobic treatment for the treatment of the distillery wastewater. The degradation of the pollutants present in distillery spent wash was carried out by ozonation, aerobic biological degradation processes alone and by using the combinations of these two processes to investigate the synergism between the two modes of wastewater treatment and with the aim of reducing the overall treatment costs. Pollutant removal efficiency was followed by means of global parameters directly related to the concentration of organic compounds in those effluents: chemical oxygen demand (COD) and the color removal efficiency in terms of absorbance of the sample at 254 nm. Ozone was found to be effective in bringing down the COD (up to 27%) during the pretreatment step itself. In the combined process, pretreatment of the effluent led to enhanced rates of subsequent biological oxidation step, almost 2.5 times increase in the initial oxidation rate has been observed. Post-aerobic treatment with ozone led to further removal of COD along with the complete discoloration of the effluent. The integrated process (ozone-aerobic oxidation-ozone) achieved approximately 79% COD reduction along with discoloration of the effluent sample as compared to 34.9% COD reduction for non-ozonated sample, over a similar treatment period. 相似文献
6.
Healthcare settings present a challenging environment for assessing low-level concentrations of specific volatile organic compounds (VOCs) in the presence of high background concentrations of alcohol from the use of hand sanitizers and surface disinfectants. The purposes of this laboratory-based project were to develop and validate a sampling and analysis methodology for quantifying low-level VOC concentrations as well as high-level alcohol concentrations found together in healthcare settings. Sampling was conducted using evacuated canisters lined with fused silica. Gas chromatography/mass spectrometry analysis was performed using preconcentration (for ppb levels) and loop injection (for ppm levels). For a select list of 14 VOCs, bias, precision, and accuracy of both the preconcentration and loop injection methods were evaluated, as was analyte stability in evacuated canisters over 30 days. Using the preconcentration (ppb-level) method, all validation criteria were met for 13 of the 14 target analytes-ethanol, acetone, methylene chloride, hexane, chloroform, benzene, methyl methacrylate, toluene, ethylbenzene, m,p-xylene, o-xylene, alpha-pinene, and limonene. Using the loop injection (ppm-level) method, all validation criteria were met for each analyte. At ppm levels, alpha-pinene and limonene remained stable over 21 days, while the rest of the analytes were stable for 30 days. All analytes remained stable over 30 days at ppb levels. This sampling and analysis approach is a viable (i.e., accurate and stable) methodology that will enable development of VOC profiles for mixed exposures experienced by healthcare workers. 相似文献
7.
Nogueira L Sanches AL da Silva DG Ferrizi VC Moreira AB de Almeida EA 《Chemosphere》2011,85(1):97-105
Fossil fuels such as diesel are being gradually replaced by biodiesel, a renewable energy source, cheaper and less polluting. However, little is known about the toxic effects of this new energy source on aquatic organisms. Thus, we evaluated biochemical biomarkers related to oxidative stress in Nile tilapia (Oreochromis niloticus) after two and seven exposure days to diesel and pure biodiesel (B100) and blends B5 and B20 at concentrations of 0.01 and 0.1 mL L−1. The hepatic ethoxyresorufin-O-deethylase activity was highly induced in all groups, except for those animals exposed to B100. There was an increase in lipid peroxidation in liver and gills in the group exposed to the higher concentration of B5. All treatments caused a significant increase in the levels of 1-hydroxypyrene excreted in the bile after 2 and 7 d, except for those fish exposed to B100. The hepatic glutathione-S-transferase increased after 7 d in animals exposed to the higher concentration of diesel and in the gill of fish exposed to the higher concentration of pure diesel and B5, but decreased for the two tested concentrations of B100. Superoxide dismutase, catalase and glutathione peroxidase also presented significant changes according to the treatments for all groups, including B100. Biodiesel B20 in the conditions tested had fewer adverse effects than diesel and B5 for the Nile tilapia, and can be suggested as a less harmful fuel in substitution to diesel. However, even B100 could activate biochemical responses in fish, at the experimental conditions tested, indicating that this fuel can also represent a risk to the aquatic biota. 相似文献
8.
Chelani AB Gajghate DG Hasan MZ 《Journal of the Air & Waste Management Association (1995)》2002,52(7):805-810
In this study, an artificial neural network is employed to predict the concentration of ambient respirable particulate matter (PM10) and toxic metals observed in the city of Jaipur, India. A feed-forward network with a back-propagation learning algorithm is used to train the neural network the behavior of the data patterns. The meteorological variables of wind speed, wind direction, relative humidity, temperature, and time are taken as input to the network. The results indicate that the network is able to predict concentrations of PM10 and toxic metals quite accurately. 相似文献
9.
Badarinath KV Madhavi Latha K Kiran Chand TR Gupta PK Ghosh AB Jain SL Gera BS Singh R Sarkar AK Singh N Parmar RS Koul S Kohli R Nath S Ojha VK Singh G 《Chemosphere》2004,54(2):167-175
Physical and optical properties of biomass burning aerosols in Northeastern region, India analyzed based on measurements made during February 2002. Large spatial extent of Northeastern Region moist tropical to moist sub-tropical forests in India have high frequency of burning in annual dry seasons. Characterization of resultant trace gases and aerosols from biomass burning is important for the atmospheric radiative process. Aerosol optical depth (AOD) observed to be high during burning period compared to pre- and post-burning days. Peak period of biomass burning is highly correlated with measured AOD and total columnar water vapor. Size distribution of aerosols showed bimodal size distribution during burning day and unimodal size distribution during pre- and post-burning days. Size distribution retrievals from biomass burning aerosols show dominance of accumulation mode particles. Weighted mean radius is high (0.22 microm) during burning period. Columnar content of aerosols observed to be high during burning period in addition to the drastic reduction of visibility. During the burning day Anderson sampler measurements showed dominance of accumulation mode particles. The diurnal averaged values of surface shortwave aerosol radiative forcing af biomass burning aerosols varies from -59 to -87 Wm(-2) on different days. Measured and modeled solar irradiances are also discussed in the paper. 相似文献
10.
Anderson AB 《Environmental management》2002,29(3):428-436
The Land Condition Trend Analysis (LCTA) program is the US Army's standard for land inventory and monitoring, employing standardized
methods of natural resources data collection, analyses, and reporting designed to meet multiple goals and objectives. Critical
to using LCTA data in natural resources management decisions is the ability of the LCTA protocols to detect changes in natural
resources. To quantify the ability of LCTA protocols to detect resource changes, power analysis techniques were used to estimate
minimum detectable effect sizes (MDES) for selected primary and secondary management variables for three Army installations.
MDES for a subset of primary variables were estimated using data from 27 installation LCTA programs. MDES for primary and
secondary variables varied widely. However, LCTA programs implemented at larger installations with lower sampling intensities
detected changes in installation resources as well as programs implemented at smaller more intensively sampled installations.
As a national monitoring program that is implemented at individual installations, LCTA protocols provide relatively consistent
monitoring data to detect changes in resources despite diverse resource characteristics and implementation constraints. 相似文献