The evolving trends of landfill leachate treatment research over the past 45 years

Environmental Science and Pollution Research - Landfilling is one of the most prevalent waste management strategies on a global scale. However, one major drawback of landfills is the production of...     

Effects of long-term exposure to PM2.5 on years of life lost and expected life remaining in Ahvaz city,Iran (2008–2017)

Ambient air pollution is one of the most significant environmental problems, and many individuals around the world die each year prematurely from diseases caused by this type of pollution. PM_2.5 can transpire deep to the lungs and induce some dangerous health effects in humans. In this study, the health effects of long-term PM_2.5 were estimated on expected life remaining (ELR) and years of life lost (YLL) indices in Ahvaz city during the years 2008–2017 using the AirQ+ software developed by WHO. Values obtained from the PM_2.5 averaging, ELR, and YLL data were processed for the whole population in the age range of 0–64 and over 64. These values were entered into AirQ+ software. The mean annual concentration of PM_2.5 was highly variable, with the highest concentration being 70.72 μg/m³ in 2010 and the lowest 41.97 μg/m³ in 2014. In all studied years, the concentration of PM_2.5 with the variations between 4.2 to 7.07 times was higher than the WHO standard (10 μg/m³). Ahvaz city also did not experience any clean day during the 10-year period, and in 2010, there were 47 very unhealthy days and 27 dangerous days, i.e., the highest number of very unhealthy and dangerous days during the period. The results estimated that the highest and lowest YLL in the next 10 years for all ages groups would be 137,760.49 (2010) and 5035.52 (2014), respectively. Also, the ELR index was lower than the Iranian standard and EPA which was significantly correlated with the concentration of PM_2.5.

     

Wood Plastic Composite Panels: Influence of the Species,Formulation Variables and Blending Process on the Density and Withdrawal Strength of Fasteners

In this work, the influence of four variable parameters including fiber types (poplar and rice straw), fiber contents (45, 60, and 75 wt%), fiber sizes (20–40 and 40–60 mesh), and blending methods (hot-pressing and extrusion) on the physico-mechanical properties of wood plastic composite panels were studied. Generally, the results showed that each of the above-mentioned parameters had significant effect on the nail and screw withdrawal strength (pull-out load) and density, whereas their interactions did not have highly impressive effects on the properties. All tested properties vary significantly with fiber origin. Composites filled with larger fiber size, produced panels with higher withdrawal strength and density. The effect of blending method on density was maximal. Withdrawal strength values of each sample decreased with increase in fiber loading. The lowest withdrawal strength values of nail and screw were obtained from the samples filled with rice straw. It was found that strength properties of the composites can be improved moderately by adding 45 wt% fiber, 20–40 mesh particle and poplar flour. According to the results, the blending method is a significant variable in the determination of withdrawal strength. Therefore, the blending method can be recommended based on the end product applications.     

Three-dimensional analysis of coherent turbulent flow structure around a single circular bridge pier

The coherent turbulent flow around a single circular bridge pier and its effects on the bed scouring pattern is investigated in this study. The coherent turbulent flow and associated shear stresses play a major role in sediment entrainment from the bed particularly around a bridge pier where complex vortex structures exist. The conventional two-dimensional quadrant analysis of the bursting process is unable to define sediment entrainment, particularly where fully three-dimensional flow structures exist. In this paper, three-dimensional octant analysis was used to improve understanding of the role of bursting events in the process of particle entrainment. In this study, the three-dimensional velocity of flow was measured at 102 points near the bed of an open channel using an Acoustic Doppler Velocity meter (Micro-ADV). The pattern of bed scouring was measured during the experiment. The velocity data were analysed using the Markov process to investigate the sequential occurrence of bursting events and to determine the transition probability of the bursting events. The results showed that external sweep and internal ejection events were an effective mechanism for sediment entrainment around a single circular bridge pier. The results are useful in understanding scour patterns around bridge piers.     

Spatial patterns of heavy metals in soil under different geological structures and land uses for assessing metal enrichments

One hundred and thirty composite soil samples were collected from Hamedan county, Iran to characterize the spatial distribution and trace the sources of heavy metals including As, Cd, Co, Cr, Cu, Ni, Pb, V, Zn, and Fe. The multivariate gap statistical analysis was used; for interrelation of spatial patterns of pollution, the disjunctive kriging and geoenrichment factor (EF_G) techniques were applied. Heavy metals and soil properties were grouped using agglomerative hierarchical clustering and gap statistic. Principal component analysis was used for identification of the source of metals in a set of data. Geostatistics was used for the geospatial data processing. Based on the comparison between the original data and background values of the ten metals, the disjunctive kriging and EF_G techniques were used to quantify their geospatial patterns and assess the contamination levels of the heavy metals. The spatial distribution map combined with the statistical analysis showed that the main source of Cr, Co, Ni, Zn, Pb, and V in group A land use (agriculture, rocky, and urban) was geogenic; the origin of As, Cd, and Cu was industrial and agricultural activities (anthropogenic sources). In group B land use (rangeland and orchards), the origin of metals (Cr, Co, Ni, Zn, and V) was mainly controlled by natural factors and As, Cd, Cu, and Pb had been added by organic factors. In group C land use (water), the origin of most heavy metals is natural without anthropogenic sources. The Cd and As pollution was relatively more serious in different land use. The EF_G technique used confirmed the anthropogenic influence of heavy metal pollution. All metals showed concentrations substantially higher than their background values, suggesting anthropogenic pollution.     

The detection of SARS-CoV-2 RNA in indoor air of dental clinics during the COVID-19 pandemic

Environmental Science and Pollution Research - In the indoor environment of dental clinics, dental personnel and patients are exposed to a risk of infection because of the transmission of...     

Development of Cellulose Aerogel as a New Material for the Reduction of Harmful Substances in Cigarette Smoke

The current study proposes a novel and improved cigarette filtration design comprising cellulose nanofibers (CNFs) and powdered activated carbons (PACs) with different dry matter contents. The proposed filter samples were primarily analyzed to verify their applicability as cigarette filters via measurements and standard tests, such as SEM, BET, DSC, and airflow permeability analysis. The results were compared with the cellulose acetate (CA) sample used as a conventional cigarette filter. The preliminary results indicated noticeable improvement compared to the reference CA. Also, the cigarettes were tested using a smoking machine, and the filtered smoke was analyzed using GC–MS to evaluate the filters' performance in reducing the harmful substances present in the smoke. The results showed that the filters made of CNF and PAC significantly decreased the toxic substances compared with the reference but did not affect the nicotine substantially and therefore will not negatively impact the trance level of smokers.

     

A Comparative Study on the Mechanical and Physical Properties of Plywood Panels Prepared by Chitosan as Bio-Adhesive

Journal of Polymers and the Environment - This study aims to make environment-friendly plywood panels acceptable in terms of both mechanical and physical properties using chitosan as a natural...