Groundwater contamination mechanism in a geothermal field: a case study of Balcova, Turkey

The Balcova Geothermal Field (BGF) located in Izmir, Turkey is situated on an east-west directed graben plain within which the hot waters surface from a fault zone that cuts the Mesozoic aged Bornova Flysch. Due to the low permeability and porosity of the Bornova Flysch, the geothermal water cycles along the immediate vicinity of the Agamemnon fault and mixes with cold waters at different depths of this fractured zone. Within the scope of this study, the mixing patterns and the groundwater contamination mechanisms are analyzed by, hydrogeological and hydrogeochemical methods. Based on the results of this research, it has been found out that the hot geothermal water and the cold regional groundwater resources of the surficial aquifer mix within the fractured zone in Bornova Flysch and within the Quaternary alluvium aquifer due to natural and anthropogenic activities including (i) the natural upward movement of geothermal fluid along the fault line, (ii) the accelerated upward seepage of geothermal fluid from faulty constructed boreholes drilled in the area, (iii) the faulty reinjection applications; and, (iv) the uncontrolled discharge of waste geothermal fluid to the natural drainage network. As a result of these activities, the cold groundwater reserves of the alluvial aquifer are contaminated thermally and chemically in such a way that various toxic chemicals including arsenic, antimony and boron are introduced to the heavily used surficial aquifer waters hindering their use for human consumption and agricultural irrigation. Furthermore, the excessive pumping from the surficial aquifer as well as the reduced surface water inflow into BGF due to the dam constructed on Ilica Creek intensify the detrimental effects of this contamination. Based on the results of this study, it can be concluded that the groundwater pollution in BGF will expand and reach to the levels of no return unless a series of preventive measures is taken immediately.     

Assessment of environmental radioactivity for Batman, Turkey

The province of Batman, located in southern Anatolia, has a population of approximately 500,000. To our knowledge, there exists no information regarding the environmental radioactivity in this province. Therefore, gamma activity measurements in soil, building materials and water samples and an indoor radon survey have been carried out in the Batman province. The mean activity concentrations of the natural radionuclides (²²⁶Ra, ²³²Th and ⁴⁰K) and a fission product (¹³⁷Cs) were 35 ± 8, 25 ± 10, 274 ± 167 and 12 ± 7 Bq kg^???1, respectively, in the soil samples. The concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K in the selected building materials ranged from 18 to 48 Bq kg^???1, 8 to 49 Bq kg^???1 and 68 to 477 Bq kg^???1, respectively. All the calculated radium equivalent (Ra_eq) activity values of the building material samples are lower than the limit of 370 Bq kg^???1, equivalent to a γ-dose of 1.5 mSv year^???1. The activity concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K in tap waters collected from the study area were determined with mean specific activity concentrations of 42 ± 15, 35 ± 9 and 524 ± 190 mBq L^???1, respectively. Indoor radon measurements were made at 95 dwellings in Batman using a CR-39 detector. The radon concentration levels were found to vary from 23 to 145 Bq m^???3. The arithmetic mean of the measured radon concentration levels was found to be 84 Bq m^???3 with a standard deviation value of 23 Bq m^???3. The measurement results obtained in this study did not significantly differ from those taken in other parts of the country. The data generated in this study can be used to determine whether the Batman province is in a normal or high background radiation area and provides a valuable database for future estimations of the impact of radioactive pollution.     

Integrated model for renewable energy planning in Turkey

All economic sectors are associated with energy use; therefore, government organizations aim to supply sustainable energy for human needs and economic growth. In particular, increased environmental concerns of the public in Turkey have impacted policymaking for renewable energy (RE) management in Turkey. The primary objective for RE sources of the Turkish Ministry of Energy is to ensure that 30% of the share of electricity production is from RE resources in 2023. In this paper, the integrated multi-objective, multi-period linear programming model is presented to determine effective allocation of RE supply for seven different geographical regions in Turkey for the period of 2017 to 2024. The integrated model consists of two different stages. The first stage involves qualitative evaluations of RE sources for seven geographical regions. Analytical Hierarchy Process (AHP) is applied to determine criteria priorities and overall ratings of geographical regions across determined criteria for RE sources are computed. The second stage of the integrated model consists of a multi-objective, multi-period linear programming model. The proposed multi-objective linear programming model is coded in MPL (Mathematical Programming Language) and solved using the GUROBI 5.1.0 solver. The output of the integrated model presents the total supply amount of RE sources for geographical regions in planning period. The ε-constraints method is applied to compute the total supply amount of RE from geographical regions for the period of 2017 to 2024. In this study, a systematic decision-making model is generated to allocate renewable energy sources to the geographical regions. The presented model integrates qualitative evaluations and quantitative parameters of different geographical regions to determine the optimal supply amount of RE. The obtained results are consistent with the potential quantities of RE alternatives in geographical regions, regional specifications, and social requirements.     

Accumulation of heavy metals in Typha angustifolia (L.) and Potamogeton pectinatus (L.) living in Sultan Marsh (Kayseri, Turkey)

Concentrations of heavy metals (Cd, Pb, Cr, Ni, Zn and Cu) were measured in bottom sediments, water and Typha angustifolia and Potamogeton pectinatus in Sultan Marsh. Sultan Marsh is one of the largest and most important wetlands in Turkey, Middle East and Europe, embodying saline and fresh water ecosystems and providing a shelter for 426 bird species. The organs of T. angustifolia have a larger quantity of the measured elements than the P. pectinatus. Considerably higher contents of Cd were found rather than in helophytes (P. pectinatus) in submerged plant (= emergent, T. angustifolia) species. The percentage of Cd in plant tissues points to a certain degree of water pollution in Sultan Mash. Analyses of water, bottom sediments and plant samples indicated that the Marsh were polluted with Pb, Cd, and partly with Cu and Zn. All sampling sites in the study area basin are generally more or less polluted when compared with the control values. Strong positive correlation was found between concentrations of Pb in water and in plants. Ni and Pb were accumulated by plants at a higher rate from bottom sediments than from water. Leaves of T. angustifolia accumulated less heavy metal than the corresponding roots. There was a significant relationship between Cd concentration in samples of plants and water pH value. It has been found that the tissues of T. angustifolia accumulate more heavy metals than the tissues of P. pectinatus. Therefore, all plants can be used as a biological indicator while determining environmental pressures; however, T. angustifolia is proved more appropriate for such studies.     

Effects of Matricaria chamomilla L. on lipid peroxidation,antioxidant enzyme systems,and key liver enzymes in CCl4-treated rats

In this study, we investigated the effects of Matricaria chamomilla L. extract (MCE) on lipid peroxidation, antioxidant enzyme systems, and several liver enzymes in carbon tetrachloride (CCl₄)-treated rats. Rats were divided into five groups. The first group (control group) was fed on standard feed. The rats in the other groups (CCl₄, MCE50, MCE100, and MCE200) were injected intraperitoneally with 0.8?mL?kg^?1 CCl₄. Moreover, rats in the MCE50, MCE100, and MCE200 groups were gavaged with 50?mg?kg^?1, 100?mg?kg^?1, and 200?mg?kg^?1 MCE, respectively. Serum aspartate aminotransferase (AST) and alanine aminotransferase (ALT) levels, whole blood malondialdehyde (MDA) and glutathione (GSH) levels, and erythrocyte superoxide dismutase (SOD), glutathione peroxidase (GPx), and catalase (CAT) activity levels were measured after 14 days of exposure. ALT and AST in the CCl₄ group increased significantly in comparison to the control group (p?4, MCE50, MCE100, and MCE200 groups at different significance levels. In conclusion, the findings suggest that, depending on the dose administered, MCE decreases CCl₄-induced damage and consequent oxidative stress in rats; it affects the antioxidant system positively.     

Retro-techno-economic evaluation of acetic acid production using cotton stalk as feedstock

In value-added chemical industries, use of agricultural wastes as raw materials remains to be a major challenge in commercialization due to lack of competitiveness with respect to petrochemical processes. This work presents the techno-economic analysis of a novel bioprocessing plant converting 356,400 MT/year cotton stalks into 147,000 MT/year acetic acid. A production scheme integrating lignin separation with the main bioconversion stages has been proposed. Techno-economic assessment was performed through economic feasibility and retro-techno-economic analysis (RTEA) methods. The RTEA method has been extended to include the estimation of research and development funding for improving economic feasibility. Carbon offset of the proposed technology has been estimated and carbon credit results have been incorporated into the economic feasibility metrics.     

Performance Enhancement of a Beta Type Rhombic Drive Stirling engine

ABSTRACT

Stirling engines maintain attraction because of their high energy conversion efficiencies. In this study, experimental comparison of a beta-type Stirling engine for two different rhombic-drive mechanisms was presented. In one of the rhombic mechanisms, spur gears were used and the gear shaft was supported in bearings from one side. In the other mechanism, two helical gears were placed on crankshafts and the crankshafts were supported in bearings from both sides. Rhombus lengths of the mechanisms were determined as 66 mm and 80 mm to provide same constant compression ratio of 2.5 for both configurations. Both mechanisms were used in the same beta-type Stirling engine having same cylinder, piston and displacer dimensions. Performance parameters of the engines were evaluated at different helium charge pressures (2–4 bar) and hot-end temperatures (400–600°C). The hot-end of the displacer cylinder was heated by a liquefied petroleum gas (LPG) burner. The engine power increased by 132%, friction losses and gear noses were reduced by supporting the rhombic-drive mechanism from both side and using helical gears. The maximum output torque and power of the engine were obtained as 13.14 Nm at 428 rpm engine speed and 663 W at 800 rpm engine speed, respectively, at 600°C hot-end temperature and 4 bar charge pressure.     

Determination of Soil Erosion Risk in the Mustafakemalpasa River Basin, Turkey, Using the Revised Universal Soil Loss Equation, Geographic Information System, and Remote Sensing

Sediment transport from steep slopes and agricultural lands into the Uluabat Lake (a RAMSAR site) by the Mustafakemalpasa (MKP) River is a serious problem within the river basin. Predictive erosion models are useful tools for evaluating soil erosion and establishing soil erosion management plans. The Revised Universal Soil Loss Equation (RUSLE) function is a commonly used erosion model for this purpose in Turkey and the rest of the world. This research integrates the RUSLE within a geographic information system environment to investigate the spatial distribution of annual soil loss potential in the MKP River Basin. The rainfall erosivity factor was developed from local annual precipitation data using a modified Fournier index: The topographic factor was developed from a digital elevation model; the K factor was determined from a combination of the soil map and the geological map; and the land cover factor was generated from Landsat-7 Enhanced Thematic Mapper (ETM) images. According to the model, the total soil loss potential of the MKP River Basin from erosion by water was 11,296,063?Mg?year(-1) with an average soil loss of 11.2?Mg?year(-1). The RUSLE produces only local erosion values and cannot be used to estimate the sediment yield for a watershed. To estimate the sediment yield, sediment-delivery ratio equations were used and compared with the sediment-monitoring reports of the Dolluk stream gauging station on the MKP River, which collected data for >41?years (1964-2005). This station observes the overall efficiency of the sediment yield coming from the Orhaneli and Emet Rivers. The measured sediment in the Emet and Orhaneli sub-basins is 1,082,010?Mg?year(-1) and was estimated to be 1,640,947?Mg?year(-1) for the same two sub-basins. The measured sediment yield of the gauge station is 127.6?Mg?km(-2)?year(-1) but was estimated to be 170.2?Mg?km(-2) year(-1). The close match between the sediment amounts estimated using the RUSLE-geographic information system (GIS) combination and the measured values from the Dolluk sediment gauge station shows that the potential soil erosion risk of the MKP River Basin can be estimated correctly and reliably using the RUSLE function generated in a GIS environment.     

Impact of dilution on the transport of poly(acrylic acid) supported magnetite nanoparticles in porous media

This paper investigates the impact of dilution on the mobility of magnetite nanoparticles surface coated with poly(acrylic acid) (PAA). Transport experiments were conducted in a water-saturated sand-packed column for input nanoparticle solutions with total Fe concentrations ranging from 100 to 600mg/L. Particle size analysis of the synthesized nanoparticle solutions showed that PAA provides good size stability for Fe concentrations as low as about 1mg/L. Time-moment analysis of the nanoparticle breakthrough curves, on the other hand, revealed that nanoparticle mass recovery from the column decreased consistently with dilution, with greater attenuation, sharper fronts and longer tails compared to that of the tracer. Particle size analysis of the eluted solutions shows that the nanoparticle size is negatively correlated with nanoparticle concentration. Modeling results suggest that the decrease in nanoparticle mobility with input concentration can be represented using a kinetic time-dependent deposition term with finite deposition capacity and a kinetic detachment term. For field applications, the increase in particle size and detachment resulting from dilution means reduced transport efficiency of nanoparticles and reaction potential with travel distance.