Assessment of deposition of MEMC (seed dressing fungicide) in exposed rice grain through study of seedling growth parameters

Rice seed grains exposed to 240 ppm of seed dressing fungicide, MEMC showed increase in deposition of mercury with increase in period of observation (0h to 48h) in 765+/-5 mg of intact endosperm. The gradual increase in mercury deposition in intact endosperm caused simultaneous decrease in mercury content of the seed coat. Exposure periods of 5 to 20 min with 240 ppm of MEMC showed 5.5 to 8.72 microg of mercury deposition in 765+/-5 mg of intact endosperm. Increase in period of exposure (3 to 20 min) to 240 ppm of MEMC and also increase in chronic treatment to lower concentrations (1.5 ppm to 24 ppm) to seed grains have shown similar results in seedling growth parameters. Lower period of exposure or exposure to lower concentrations, both showed a significant inhibition of root growth, however the shoot growth showed stimulation. But higher exposure period or exposure to higher concentrations brought inhibition of both root and shoot growth. The exposure period showing 50% of root growth inhibition of 72h old seedling was calculated to be 10 min So also the chronic treatment showing the 50% of root growth inhibition was calculated to be 9 ppm. Ten min exposure of rice grain to 240 ppm of MEMC showed deposition of 7.11 microg of mercury in 765+/-5 mg of intact endosperm at 48h of observation (optimal phase of germinating process). Regression analysis indicated that by the time of 72h the intact endosperm and developing seedling might have acquired with a minimum amount of 10.23 microg of mercury from the seed coat. Finally it can be said that 10.23 microg of MEMC might be bringing 50% root growth inhibition in 72h old seedlings and 16.71 microg of mercury causing 50% inhibition of both root and shoot growth of 120h old seedlings.     

Public Perceptions and Acceptance of Intensive Forestry in Sweden

The use of intensive forestry on part of the forested area in Sweden increases the production of forest biomass and enables an increased use of such biomass to mitigate climate change. However, with increasing conflicting interests in forests and forestry, the success of such a strategy depends on the public acceptance. In this paper, the results of a mail survey show that although a majority of the general public in Sweden supports measures to increase forest growth, they oppose the use of intensive forestry practices such as the cultivation of exotic tree species, clones, and forest fertilization. The acceptance of such practices is mainly influenced by the perceptions of their environmental consequences. Public acceptance was highest for forest fertilization, whereas clone cultivation was the least accepted practice.     

Perceptions, attitudes and interest of Swedish architects towards the use of wood frames in multi-storey buildings

Use of wood frames from sustainable forestry instead of non-wood frames in multi-storey buildings can reduce primary energy use and carbon dioxide emissions in construction. However, construction actors might have different perceptions towards wood frames than towards steel and concrete frames. Such perceptions may influence the actors’ decision to adopt wood frames. In this study we use a web-based questionnaire to assess Swedish architects’ perceptions, attitudes and interest towards steel, concrete and wood frames in multi-storey buildings (n = 412). Results indicate that the responding architects find concrete the most suitable frame material in buildings of 3-8 storeys, mainly because of the performance of concrete with regards to the engineering aspects (e.g. stability and fire safety) that were considered important in the choice of frame material. Although wood is considered the least suitable frame material, the overall attitude towards, and interest in, using wood is positive and related to the perceived environmental benefits of wood. This may derive from an increased discussion of and information about the environmental impact of buildings. Wood may be perceived as new and innovative while not considered as adequately proven as steel and concrete with regards to engineering aspects.     

Utilization of agricultural waste biomass and recycling toward circular bioeconomy

Environmental Science and Pollution Research - The major global concern on energy is focused on conventional fossil resources. The burning of fossil fuels is an origin of greenhouse gas emissions...     

A design of a vermiculite column adsorber for the removal of lead from water

Mini-column techniques were employed to determine the mass transfer coefficient for lead adsorption onto vermiculite. Variation of the mass transfer coefficient with flow rate, particle size of sorbent, and influent lead concentration were studied. Multiple linear regression (MLR) analysis showed that the mass transfer coefficient varied as the 0.43 power of the liquid flow rate and inversely as the 0.272 power of particle diameter of the vermiculite, but was independent of the influent concentration of lead. Different parameters of a fixed bed column design for the removal of lead by vermiculite were determined using the data from the batch sorption study. The performance of the liquid bed column in removing lead was in close agreement with predicted performance using the batch isotherm data.     

Phosphorus speciation in the marine sediment of Kalpakkam coast,southeast coast of India

A study was carried out at Kalpakkam coast to find out the distribution of various fractions of phosphorus (P) in the marine sediment during pre-northeast monsoon period. Samples were collected from ten locations covering ~80 km² of the inner-shelf region. Sedimentary parameters such as sand, silt, clay, and organic carbon percentage were analyzed in order to find out their relation with various P fractions. The sediment was found to be predominantly sandy in nature with low silt and clay content. Among all the fractions (loosely bound (LoP), calcium bound (CaP), iron bound (FeP), aluminum bound (AlP), and organic (OP)), CaP fraction constituted the largest portion (68.7 %) followed by organic fraction (16.3 %). The bioavailable P fractions ranged from 5 to 44 % of the total P (TP) content. Relatively high LoP content was observed at the offshore locations with comparatively high mud percentage as compared with the near-shore locations. As FeP and AlP concentrations were directly proportional to the amount of fine-grain sediment, the low levels of these fractions found in this coastal area were therefore attributed to the sandy nature of the sediments. The order of abundance of the major forms of P in the surface sediments of Kalpakkam coast was as follows: CaP?>?OP?>?LoP?>?AlP?>?FeP.     

Removal efficiency of fluoride by novel Mg-Cr-Cl layered double hydroxide by batch process from water

The fluoride ion removal from aqueous solution using synthesized Mg-Cr-Cl layered double hydroxide has been reported.Mg-Cr-Cl was characterized by X-ray powder diffraction,Fourier-transform infrared,thermo-gravimetric analysis,differential thermal analysis,and scanning electron microscope.Adsorption experiments were carried out in batch mode as a function of adsorption dosages,contact time,pH,and initial fluoride concentration to get optimum adsorption capacity.The adsorption kinetic study showed that the adsorption process followed first order kinetics.The fluoride removal was 88.5% and 77.4% at pH 7 with an adsorbent dose of 0.6 g/100 mL solution and initial fluoride concentration of 10 mg/L and 100 mg/L,respectively.The equilibrium was established at 40 min.Adsorption experiment data were fitted well with Langmuir isotherm with R 2 = 0.9924.Thermodynamic constants were also measured and concluded that the adsorption process was spontaneous and endothermic in nature.The removal percentage decreased slowly with increasing pH.This process is suitable for industrial effluents.The regeneration of the material is not possible.     

Characterization of the pro-inflammatory potencies of purified Jatropha phorbol esters by a gene expression-based in vitro bioassay

The oil extracted from Jatropha seeds is an emerging biodiesel feedstock that also contains several pro-inflammatory phorbol esters. These phorbol esters can elicit adverse inflammatory responses through activation of the protein kinase C, as previously described for the prototypical phorbol ester 12-O-tetradecanoylphorbol-13-acetate. We extracted and purified the six phorbol esters identified in Jatropha oil and assessed their pro-inflammatory activities using a recently developed gene expression-based bioassay. Borrowing from an approach used for the assessment of dioxin toxicity, we expressed their pro-inflammatory potencies in relation to the potency of 12-O-tetradecanoylphorbol-13-acetate (in terms of 12-O-tetradecanoylphorbol-13-acetate toxic equivalency factors). The pro-inflammatory potencies of Jatropha phorbol esters were orders of magnitudes below the potency of 12-O-tetradecanoylphorbol-13-acetate. Interestingly, the cytotoxicity of phorbol esters did not appear to be directly related to their pro-inflammatory potencies. Calculations based on phorbol ester potencies and concentrations led to overestimation of the pro-inflammatory activity of Jatropha oil, as measured by the same gene expression-based bioassay. The preliminary results presented here suggest that further work on the described approach may lead to the development of valuable tools and metrics to quantify and predict the pro-inflammatory activities of complex phorbol ester mixtures.