On the dissipation rate of temperature fluctuations in stably stratified flows

Environmental Fluid Mechanics - In this study, we explore several integral and outer length scales of turbulence which can be formulated by using the dissipation of temperature fluctuations (...     

Variations in occupant response with seat belt slack and anchor location during moderate frontal impacts

Both seat belt slack and anchor location are known to affect occupant excursion during high-speed frontal collisions, but their effects have not been studied at moderate collision severities. The goal of this study was to quantify how seat belt slack and anchor location affect occupant kinematics and kinetics in moderate severity frontal collisions. A Hybrid III 50th percentile male dummy was seated on a programmable sled and exposed to frontal collisions with a speed change of 17.5 km/h. The seat belt was adjusted either snugly or with 10 cm slack (distributed 60/40 between the shoulder and lap portions) and the anchor location was varied by adjusting the seat position either fully forward or rearward (seat travel = 13 cm). Accelerations and displacements of the head, T1 and pelvis were measured in the sagittal plane. Upper neck loads and knee displacements were also measured. Five trials were performed for each of the four combinations of belt adjustment (snug, slack) and anchor location (seat forward, seat rearward). For each trial, kinematic and kinetic response peaks were determined and then compared across conditions using ANOVAs. Peak displacements, accelerations and loads varied significantly with both seat belt slack and anchor location. Seat belt slack affected more parameters and had a larger effect than anchor location on most peak response parameters. Head displacements increased a similar amount between the snug/slack belt conditions and the rearward/forward anchor locations. Overall, horizontal head displacements increased from 23.8 cm in the snug-belt, rearward-anchor configuration to 33.9 cm in the slack-belt, forward-anchor configuration. These results demonstrated that analyses of occupant displacements, accelerations and loads during moderate frontal impacts should consider potential sources of seat belt slack and account for differences in seat belt anchor locations.