Zur Biotransformation des 1-Äthinylcyclohexylallophanats-(1)

The Science of Nature -     

Understanding the fate and transport of petroleum hydrocarbons from coal tar within gasholders

Coal tars have been identified as posing a threat to human health due to their toxic, mutagenic and carcinogenic characteristics. Workers involved in former gasholders decommissioning are potentially exposed to relevant concentrations of volatile and semi-volatile hydrocarbons upon opening up derelict tanks and during tar excavation/removal. While information on contaminated sites air-quality and its implications on medium-long term exposure is available, acute exposure issues associated with the execution of critical tasks are less understood. Calculations indicated that the concentration of a given contaminant in the gasholder vapour phase only depends on the coal tar composition, being only barely affected by the presence of water in the gasholder and the tar volume/void space ratio. Fugacity modelling suggested that risk-critical compounds such as benzene, naphthalene and other monocyclic and polycyclic aromatic hydrocarbons may gather in the gasholder air phase at significant concentrations. Gasholder emissions were measured on-site and compared with the workplace exposure limits (WELs) currently in use in UK. While levels for most of the toxic compounds were far lower than WELs, benzene air-concentrations where found to be above the accepted threshold. In addition due to the long exposure periods involved in gasholder decommissioning and the significant contribution given by naphthalene to the total coal tar vapour concentration, the adoption of a WEL for naphthalene may need to be considered to support operators in preventing human health risk at the workplace. The Level I fugacity approach used in this study demonstrated its suitability for applications to sealed environments such as gasholders and its further refining could provide a useful tool for land remediation risk assessors.     

Radon-222 signatures of natural ventilation regimes in an underground quarry

Radon-222 activity concentration has been monitored since 1999 in an underground limestone quarry located in Vincennes, near Paris, France. It is homogeneous in summer, with an average value of 1700 Bq m(-3), and varies from 730 to 1450 Bq m(-3) in winter, indicating natural ventilation with a rate ranging from 0.5 to 2.4 x 10(-6) s(-1) (0.04-0.22 day(-1)). This hypothesis is supported by measurements in the vertical access pit where, in winter, a turbulent air current produces a stable radon profile, smoothly decreasing from 700 Bq m(-3) at 20 m depth to 300 Bq m(-3) at surface. In summer, a thermal stratification is maintained in the pit, but the radon-222 concentration jumps repeatedly between 100 and 2000 Bq m(-3). These jumps are due to atmospheric pressure pumping, which induces ventilation in the quarry at a rate of about 0.1 x 10(-6) s(-1) (0.009 day(-1)). Radon-222 monitoring thus provides a dynamical characterisation of ventilation regimes, which is important for the assessment of the long-term evolution of underground systems.     

Importance of colloids in the transport within the dissolved phase (<450 nm) of artificial radionuclides from the Rhône river towards the Gulf of Lions (Mediterranean Sea)

The significance of colloidal fractions regarding the transport of artificial radionuclides in natural water systems is underlined by using sequential ultrafiltration both in the Rh?ne freshwater and the marine area under and outside the influence of the river outflow. Indeed, the Rhodanian aquatic system represents an interesting test site as various artificial radionuclides are released into the Rh?ne river by several nuclear installations. We focused our study on (137)Cs, (106)Ru, (60)Co, (238)Pu and (239+240)Pu. Our results show that Fe, Al and Organic carbon (OC) are the main components of colloidal matter. Colloids represent about 15% of dissolved (<450 nm) OC and 25% of dissolved Fe and Al exported towards the sea. Within the dissolved (< 450 nm) phase, these colloidal compounds are shown to account for the transport of 40% for both Co and Ru, 60% for (238)Pu and (239+240)Pu and have no significance on (137)Cs flux.     

Optimisation of a PMAxx™-RT-qPCR Assay and the Preceding Extraction Method to Selectively Detect Infectious Murine Norovirus Particles in Mussels

Human noroviruses are a major cause for gastroenteritis outbreaks. Filter-feeding bivalve molluscs, which accumulate noroviruses in their digestive tissues, are a typical vector for human infection. RT-qPCR, the established method for human norovirus detection in food, does not allow discrimination between infectious and non-infectious viruses and can overestimate potentially infectious viral loads. To develop a more accurate method of infectious norovirus load estimation, we combined intercalating agent propidium monoazide (PMAxx™)-pre-treatment with RT-qPCR assay using in vitro-cultivable murine norovirus. Three primer sets targeting different genome regions and diverse amplicon sizes were used to compare one-step amplification of a short genome fragment to three two-step long-range RT-qPCRs (7 kbp, 3.6 kbp and 2.3 kbp amplicons). Following initial assays performed on untreated infectious, heat-, or ultraviolet-inactivated murine noroviruses in PBS suspension, PMAxx™ RT-qPCRs were implemented to detect murine noroviruses subsequent to their extraction from mussel digestive tissues; virus extraction via anionic polymer-coated magnetic beads was compared with the proteinase K-dependent ISO norm. The long-range RT-qPCR process detecting fragments of more than 2.3 kbp allowed accurate estimation of the infectivity of UV-damaged murine noroviruses. While proteinase K extraction limited later estimation of PMAxx™ pre-treatment effects and was found to be unsuited to the assay, magnetic bead-captured murine noroviruses retained their infectivity. Genome copies of heat-inactivated murine noroviruses differed by 2.3 log₁₀ between RT-qPCR and PMAxx™-RT-qPCR analysis in bivalve molluscs, the PMAxx™ pre-treatment allowing a closer approximation of infectious titres. The combination of bead-based virus extraction and PMAxx™ RT-qPCR thus provides a more accurate model for the estimation of noroviral bivalve mollusc contamination than the conjunction of proteinase K extraction and RT-qPCR and has the potential (once validated utilising infectious human norovirus) to provide an added measure of security to food safety authorities in the hazard assessment of potential bivalve mollusc contamination.

     

Wax perception in honeybees: contact is not necessary

In social insects, much progress has been made in identifying variations in the cuticular signatures of sexes, castes, kin and reproductive status. In contrast to this, we still do not know how the receivers perceive these recognition cues. This study was designed to investigate whether honeybees use contact-chemosensory or olfactory sensilla to perceive wax components. To answer this question in a behavioral assay, we combined classical conditioning of the proboscis extension reaction and a recently established method using zinc sulfate to selectively block antennal contact-chemosensory sensilla. Comparison of the responses to sucrose, wax and geraniol before and after antennal zinc sulfate treatment revealed that the sucrose response is lost after treatment but the responses to wax and geraniol are maintained. As sucrose is perceived by the contact-chemosensory sensilla, the retention of the wax response indicates that contact-chemosensory sensilla are not necessary for wax perception.     

Characteristics of dwellings contaminated by moulds

Dwellings showing a presence of moulds are considered to be unhealthy both by the inhabitants and by sanitary authorities. Although the thresholds of pathogenicity have not yet been established, the toxic, allergic and infectious risk of indoor moulds is better understood today. A study on indoor fungi contamination for 128 dwellings was done between October and May in France. It concerned 69 dwellings, the occupants of which either complained to the sanitary authorities about problems of moulds and humidity or consulted a doctor who related their symptoms to housing conditions. Fifty-nine other dwellings, the occupants of which were healthy, constituted the control group. We present the statistical analysis of questionnaires, which aimed to clarify characteristics of dwellings associated with high concentrations of airborne moulds. Air samples were taken with an impactor in 500 rooms. On visiting dwellings, investigators obtained answers to 25 questions concerning characteristics of inhabitants and living space, as well as the presence of mould indicators. Indoor and outdoor temperature and indoor relative humidity of air measurements were taken. The total concentration of fungi in the air was significantly higher in ground floor apartments versus those on other floors (p = 0.047), in small and highly occupied dwellings (p = 0.03 and 0.003), in dwellings with electric heating (p = 0.04), without a ventilation system (p = 0.003), with water damage (p = 0.003), and finally, in those where the investigator noted an odour of moisture or visible moulds (p < 0.001). The efficacy of the latter criteria in the evaluation of insalubrity is discussed.     

Experimental assessment of characteristic turbulent scales in two-phase flow of hydraulic jump: from bottom to free surface

A hydraulic jump is a turbulent shear flow with a free-surface roller. The turbulent flow pattern is characterised by the development of instantaneous three-dimensional turbulent structures throughout the air–water column up to the free surface. The length and time scales of the turbulent structures are key information to describe the turbulent processes, which is of significant importance for the improvement of numerical models and physical measurement techniques. However, few physical data are available so far due to the complexity of the measurement. This paper presents an investigation of a series of characteristic turbulent scales for hydraulic jumps, covering the length and time scales of turbulent flow structures in bubbly flow, on free surface and at the impingement point. The bubbly-flow turbulent scales are obtained for Fr = 7.5 with 3.4 × 10⁴ < Re < 1.4 × 10⁵ in both longitudinal and transverse directions, and are compared with the free-surface scales. The results highlight three-dimensional flow patterns with anisotropic turbulence field. The turbulent structures are observed with different length and time scales respectively in the shear flow region and free-surface recirculation region. The bubbly structures next to the roller surface and the free-surface fluctuation structures show comparable length and time scales, both larger than the scales of vortical structures in the shear flow and smaller than the scales of impingement perimeter at the jump toe. A decomposition of physical signals indicates that the large turbulent scales are related to the unsteady motion of the flow in the upper part of the roller, while the high-frequency velocity turbulence dominates in the lower part of the roller. Scale effects cannot be ignored for Reynolds number smaller than 4 × 10⁴, mainly linked to the formation of large eddies in the shear layer. The present study provides a comprehensive assessment of turbulent scales in hydraulic jump, including the analyses of first data set of longitudinal bubbly-flow integral scales and transverse jump toe perimeter integral scales.     

Is it only the regulatory status? Broadening the debate on cisgenic plants

In current debates on emerging technologies for plant breeding in Europe, much attention has been given to the regulatory status of these techniques and their public acceptance. At present, both genetically modified plants with cisgenic approaches—using genes from crossable species—as well as transgenic approaches—using genes from different species—fall under GMO regulation in the EU and both are mandatorily labelled as GMOs. Researchers involved in the early development of cisgenic GM plants convey the message that the potential use and acceptance of cisgenic approaches will be seriously hindered if GMO regulations are not adjusted. Although the similar treatment and labelling of transgenic and cisgenic plants may be a legitimate concern for the marketability of a cisgenic GM plant, there are concerns around their commercialization that reach beyond the current focus on (de)regulation. In this paper, we will use the development of the cisgenic GM potato that aims to overcome ‘late blight’—the most devastating potato disease worldwide—as a case to argue that it is important to recognize, reflect and respond to broader concerns than the dominant focus on the regulatory ‘burden’ and consumer acceptance. Based on insights we gained from discussing this case with diverse stakeholders within the agricultural sector and potato production in Norway during a series of workshops, we elaborate on additional issues such as the (technical) solution offered; different understandings of the late blight problem; the durability of the potato plant resistance; and patenting and ownership. Hence, this paper contributes to empirical knowledge on stakeholder perspectives on emerging plant breeding technologies, underscoring the importance to broaden the scope of the debate on the opportunities and challenges of agricultural biotechnologies, such as cisgenic GM plants. The paper offers policy-relevant input to ongoing efforts to broaden the scope of risk assessments of agricultural biotechnologies. We aim to contribute to the recognition of the complex socio-ecological, legal and political dimensions in which these technological developments are entangled as a means to acknowledge, discuss and respond to these concerns and thereby contribute to more comprehensive and responsible developments within agricultural biotechnology.