Assessment of lead pollution in topsoils of a southern Italy area: Analysis of urban and peri-urban environment

Exposure to lead (Pb) may affect adversely human health. Mapping soil Pb contents is essential to obtain a quantitative estimate of potential risk of Pb contamination. The main aim of this paper was to determine the soil Pb concentrations in the urban and peri-urban area of Cosenza–Rende to map their spatial distribution and assess the probability that soil Pb concentration exceeds a critical threshold that might cause concern for human health. Samples were collected at 149 locations from residual and non-residual topsoil in gardens, parks, flower-beds, and agricultural fields. Fine earth fraction of soil samples was analyzed by X-ray Fluorescence spectrometry. Stochastic images generated by the sequential Gaussian simulation were jointly combined to calculate the probability of exceeding the critical threshold that could be used to delineate the potentially risky areas. Results showed areas in which Pb concentration values were higher to the Italian regulatory values. These polluted areas were quite large and likely, they could create a significant health risk for human beings and vegetation in the near future. The results demonstrated that the proposed approach can be used to study soil contamination to produce geochemical maps, and identify hot-spot areas for soil Pb concentration.     

Effects of hydromorphology and riparian vegetation on the sediment quality of agricultural low-order streams: consequences for stream restoration

Intensive agricultural land use imposes multiple pressures on streams. More specifically, the loading of streams with nutrient-enriched soil from surrounding crop fields may deteriorate the sediment quality. The current study aimed to find out whether stream restoration may be an effective tool to improve the sediment quality of agricultural headwater streams. We compared nine stream reaches representing different morphological types (forested meandering reaches vs. deforested channelized reaches) regarding sediment structure, sedimentary nutrient and organic matter concentrations, and benthic microbial respiration. Main differences among reach types were found in grain sizes. Meandering reaches featured larger mean grain sizes (50–70 μm) and a thicker oxygenated surface layer (8 cm) than channelized reaches (40 μm, 5 cm). Total phosphorous amounted for up to 1,500 μg?g^?1 DW at retentive channelized reaches and 850–1,050 μg?g^?1 DW at the others. While N-NH₄ accumulated in the sediments (60–180 μg?g^?1 DW), N-NO₃ concentrations were generally low (2–5 μg?g^?1 DW). Benthic respiration was high at all sites (10–20 g O₂ m^?2?day^?1). Our study shows that both hydromorphology and bank vegetation may influence the sediment quality of agricultural streams, though effects are often small and spatially restricted. To increase the efficiency of stream restoration in agricultural landscapes, nutrient and sediment delivery to stream channels need to be minimized by mitigating soil erosion in the catchment.     

Effects of riparian forest buffers on in-stream nutrient retention in agricultural catchments

In northeastern Austria, marshlands have been turned into the most productive arable land of the country. As a result, most headwater streams show structurally degraded channels, lacking riparian buffer zones, which are heavily loaded with nutrients from the surrounding crop fields. The present study examines whether longitudinally restricted riparian forest buffers can enhance the in-stream nutrient retention in nutrient-enriched headwater streams. We estimated nutrient uptake from pairwise, short-term addition experiments with NH, NH, PO, and NaCl within reaches with riparian forest buffers (RFB) and degraded reaches (DEG) of the same streams. Riparian forest buffers originated from the conservation of the pristine vegetation or from restoration measures. Hydrologic retention was calculated with the model OTIS-P on the basis of conductivity break-through curves from the salt injections. A significant increase in surface transient storage was revealed in pristine and restored RFB reaches compared with DEG reaches due to the longitudinal step-pool pattern and the frequent occurrence of woody debris on the channel bed. Ammonium uptake lengths were significantly shorter in RFB reaches than in DEG reaches, resulting from the higher hydrologic retention. Uptake velocities did not differ significantly between RFB and DEG reaches, indicating that riparian forest buffers did not affect the biochemical nutrient demand. Uptake of NH was mainly driven by autotrophs. Net PO uptake was not affected by riparian forest buffers. The study shows that the physical and biogeochemical effects of riparian forest buffers on the in-stream nutrient retention are limited in the case of highly eutrophic streams.     

A Cost-Effectiveness Analysis of Seminatural Wetlands and Activated Sludge Wastewater-Treatment Systems

A cost-effectiveness analysis was performed to evaluate the competitiveness of seminatural Free Water Surface (FWS) wetlands compared to traditional wastewater-treatment plants. Six scenarios of the service costs of three FWS wetlands and three different wastewater-treatment plants based on active sludge processes were compared. The six scenarios were all equally effective in their wastewater-treatment capacity. The service costs were estimated using real accounting data from an experimental wetland and by means of a market survey. Some assumptions had to be made to perform the analysis. A reference wastewater situation was established to solve the problem of the different levels of dilution that characterize the inflow water of the different systems; the land purchase cost was excluded from the analysis, considering the use of public land as shared social services, and an equal life span for both seminatural and traditional wastewater-treatment plants was set. The results suggest that seminatural systems are competitive with traditional biotechnological systems, with an average service cost improvement of 2.1-fold to 8-fold, according to the specific solution and discount rate. The main improvement factor was the lower maintenance cost of the seminatural systems, due to the self-regulating, low artificial energy inputs and the absence of waste to be disposed. In this work, only the waste-treatment capacity of wetlands was considered as a parameter for the economic competitiveness analysis. Other goods/services and environmental benefits provided by FWS wetlands were not considered.

The influence of sampling protocol on nonmethane hydrocarbon mixing ratios

The effect of sampling protocol on ambient air hydrocarbon mixing ratios was examined on eight sampling days in Los Angeles during 2007 and 2008. Four protocols, which were based on previously published multi-city urban hydrocarbon studies in the United States, were compared and differences were quantified. Whole air canister samples were collected and analyzed for nonmethane hydrocarbons (NMHCs). Differing sampling protocols resulted in large differences in mixing ratios, up to an order of magnitude, for certain NMHCs on the same sampling day. However, the magnitude of the variability between NMHC levels obtained by the four protocols was not consistent throughout the eight sampling days. It was found that sampling time, followed by sampling location, had the greatest influence on the magnitude of the mixing ratio. Ratios between hydrocarbons, often used in urban studies to gain information on emission sources, also varied depending on the protocol used. Comparison of absolute NMHC mixing ratios collected in urban environments using differing sampling protocols should be made with care.     

Regulatory effects of dioxin-like and non-dioxin-like PCBs and other AhR ligands on the antioxidant enzymes paraoxonase 1/2/3

Paraoxonase 1 (PON1), an antioxidant enzyme, is believed to play a critical role in many diseases, including cancer. PCBs are widespread environmental contaminants known to induce oxidative stress and cancer and to produce changes in gene expression of various pro-oxidant and antioxidant enzymes. Thus, it appeared of interest to explore whether PCBs may modulate the activity and/or gene expression of PON1 as well. In this study, we compared the effects of dioxin-like and non-dioxin-like PCBs and of various aryl hydrocarbon receptor (AhR) ligands on PON1 regulation and activity in male and female Sprague-Dawley rats. Our results demonstrate that (i) the non-dioxin-like PCB154, PCB155, and PCB184 significantly reduced liver and serum PON1 activities, but only in male rats; (ii) the non-dioxin-like PCB153, the most abundant PCB in many matrices, did not affect PON1 messenger RNA (mRNA) level in the liver but significantly decreased serum PON1 activity in male rats; (iii) PCB126, an AhR ligand and dioxin-like PCB, increased both PON1 activities and gene expression; and (iv) even though three tested AhR ligands induced CYP1A in several tissues to a similar extent, they displayed differential effects on the three PONs and AhR, i.e., PCB126 was an efficacious inducer of PON1, PON2, PON3, and AhR in the liver, while 3-methylcholantrene induced liver AhR and lung PON3, and 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), the most potent AhR agonist, increased only PON3 in the lung, at the doses and exposure times used in these studies. These results show that PCBs may have an effect on the antioxidant protection by paraoxonases in exposed populations and that regulation of gene expression through AhR is highly diverse.     

Towards a rational design of materials for the removal of environmentally relevant cations: polymer inclusion membranes (PIMs) and surface-modified PIMs for Sn2+ sequestration in aqueous solution

Environmental Science and Pollution Research - This work is focused on the design and preparation of polymer inclusion membranes (PIMs) for potential applications for stannous cation sequestration...     

Translocation of Sb and Ti in an undisturbed floodplain soil after application of Sb2O3 and TiO2 nanoparticles to the surface

The pore water transport of antimony and titanium, applied as nanoparticles (NPs), was studied by spiking stable suspensions of two different nanomaterials on the surface of an undisturbed floodplain soil. For preparation of stable dispersions, two different strategies were followed. (i) Comparable to those used in industrial applications: titanium dioxide nanoparticles, with an average diameter of 99 nm, were prepared by high-energy ball milling in water, whereas for (ii) antimony trioxide (Sb(2)O(3); average diameter 121 nm) a dispersing agent (sodium salt of poly[(naphthaleneformaldehyde)sulfonate] (pNFS) in water) was used. The upper 17 cm of a floodplain soil (river Rhine, Germany) was sampled using the minimally invasive sediment or fauna incubation experiment (SOFIE? two compartment cell; 3 l volume each), which preserved the pore system of the soil. The cells were equipped with 450 and 100 nm filter probes at different depths providing a non-invasive sampling of the pore water. The pore water was sampled at different times (T = 0, 24, 48, 96 and 196 h) and analysed by inductively coupled plasma quadrupole mass spectrometry (ICP-QMS). Sb and Ti were transported via the pore water of the floodplain soil to a depth of 14 cm, corresponding to the maximum cell depth. The highest Sb concentration in the pore water was detected after 24 h at a depth of 5.5-8 cm. Although the spiked concentration was higher for Ti than for Sb, the total Ti concentration in the pore water of the spiked cell was lower. This indicates a stronger agglomeration of TiO(2) NPs or a more intensive interaction of Ti with the solid matrix and a faster transport of Sb towards deeper soil layers. The results show that metal(loid)s from metal oxide NPs are transported in the soil pore water and, hence, have the potential to act as the source of contamination of deeper soil layers after soil surface contamination.