Comprehensive utilization of residues of Magnolia officinalis based on fiber characteristics

Journal of Material Cycles and Waste Management - The traditional Chinese medicinal plant Magnolia officinalis has a wide range of applications; including more than 200 kinds of patented Chinese...     

Impact of automobile emissions on the levels of platinum and lead in Accra,Ghana

Examination of car fleet records in Accra demonstrates an increasing proportion of catalytic converter-equipped cars in the relatively old car fleet (average age 13 years) due to their import from developed countries. However, only leaded petrol is sold in Ghana. Lead anti-knocking additives, which are known to affect catalyst activity and promote thermal sintering and mechanical abrasion, may increase Pt emissions. This possible synergism prompted the concomitant determination of Pb and Pt levels in road dust and roadside soils in Ghana. Both metals followed traffic density with higher concentrations in urban areas compared to remote sites. In urban areas, the range for Pb (365 +/- 93 microg g(-1) for dust and 291 +/- 76 microg g(-1) for soil) reflects precatalyst levels in Europe and the US, while the range for Pt (39 +/- 24 ng g(-1) for dust and 15 +/- 5.3 ng g(-1) for soil) is typical for the same countries. The elevated Pt concentrations were unexpected due to recent introduction of catalysts to Ghana compared to the prolonged use of catalysts in Europe and the US.     

Rapid prenatal diagnosis of Patau's syndrome in a fetus with an abdominal wall defect by 72 hour culture of cells from amniotic fluid

A woman in the 32nd week of pregnancy was referred for investigation because of fetal abnormalities, including an abdominal wall defect, detected by ultrasonography. In view of the increased risk of chromosome abnormality, amniocentesis was performed to enable informed decisions about the management of the pregnancy and delivery to be taken. Cells from the liquor were inoculated into standard lymphocyte culture medium and incubated for 72 h. Slides with a high mitotic index and good quality metaphases, comparable to those from a blood culture, were obtained after harvesting. Cytogenetic analysis showed the karyotype to be 46,XY,—14,+t(13ql4q), which is consistent with Patau's syndrome. This technique appears to be an option for rapid karyotyping in cases of abdominal wall defect, where a chromosomal abnormality is suspected.     

The application of life cycle assessment to design

This paper explores the practical application of life cycle assessment (LCA) to product system development. While life cycle assessment methods have been studied and demonstrated extensively over the last two decades, their application to product design and development has not been critically addressed. Many organizational and operational factors limit the integration of the three LCA components (inventory analysis, impact assessment and improvement assessment) with product development. Design of the product system can be considered a synthesis of individual decisions and choices made by the design team, which ultimately shape the system's environmental profile. The environmental goal of life cycle design is to minimize the aggregate environmental impacts associated with the product system. Appropriate environmental information must be supplied to decision makers throughout each stage of the development process to achieve this goal. LCA can serve as a source of this information, but informational requirements can vary as the design moves from its conceptual phase, where many design choices are possible, to its detailed design and implementation. Streamlined approaches and other tools, such as design checklists, are essential. The practical use of this tool in product development also depends on the nature and complexity of the product system (e.g. new vs. established), the product development cycle (time-to-market constraints), availability of technical and financial resources, and the design approach (integrated vs. serial). These factors will influence the role and scope of LCA in product development. Effective communication and evaluation of environmental information and the integration of this information with cost, performance, cultural and legal criteria will also be critical to the success of design initiatives based on the life cycle framework. An overview of several of these design initiatives will be presented.     

Results of a questionnaire investigation on the management of environmental issues during conceptual design. A case study of two large made-to-order companies

This paper investigates the current treatment of environmental issues by two companies within the large made-to-order sector. Fifty questionnaires were issued to the design team of each company to assess current practice in the integration of environmental issues with design activities, awareness of environmental issues, awareness of existing environmental design tools and the preferred format for a potential clean design tool.     

Particle monitoring techniques for water treatment applications

１　ＩｎｔｒｏｄｕｃｔｉｏｎＰａｒｔｉｃｌｅｓｉｎｎａｔｕｒａｌｗａｔｅｒｓａｒｅｏｆｔｅｎｔｏｏｓｍａｌｌｔｏｂｅｅｆｆｅｃｔｉｖｅｌｙｒｅｍｏｖｅｄｂｙｔｈｅｓｅｓｅｐａｒａｔｉｏｎｔｅｃｈｎｉｑｕｅｓ．Ｔｈｅｐｒｏｃｅｓｓｏｆｃｏａｇｕｌａｔｉｏｎ／ｆｌｏｃｃｕｌａｔｉｏｎｃａｕｓｅｓｆｉｎｅｐａｒｔｉｃｌｅｓｔｏａｇｇｒｅｇａｔｅｉｎｔｏｌａｒｇｅｒｕｎｉｔｓ（ｆｌｏｃｓ）ｗｈｉｃｈｃａｎｂｅｍｏｒｅｅａｓｉｌｙｓｅｐａｒａｔｅｄ．Ｉｎｗａｔｅｒｔｒｅａｔｍｅｎｔｓａｌｔｓｏｆａｌｕｍｉ…     

HEAVY RAINFALL DISTRIBUTIONS BY SEASON IN LOUISIANA: SYNOPTIC INTERPRETATIONS AND QUANTILE ESTIMATES1

ABSTRACT: In most studies, quantile estimates of extreme 24-hour rainfall are given in annual probabilities. The probability of experiencing an excessive storm event, however, differs throughout the year. As a result, this paper explored the differences between heavy rainfall distributions by season in Louisiana. It was concluded by using the Kruskal-Wallis and Mann-Whitney tests that the distribution of heavy rainfall events differs significantly between particular seasons at the sites near the Gulf Coast. Furthermore, seasonal frequency curves varied dramatically at the four sites examined. Mixed distributions within these data were not found to be problematic, but the mechanisms that produced the events were found to change seasonally. Extreme heavy rainfall events in winter and spring were primarily generated by frontal weather systems, while summer and fall events had high proportions of events produced by tropical disturbances and airmass (free-convective) conditions.     

Lightweight Concrete Containing an Alkaline Resistant Starch-Based Aquagel

Starch aquagel-based lightweight concrete has properties similar to those of other lightweight concrete products. However, starch aquagels are unstable in the strongly alkaline conditions typical of Portland Cement-based concrete and may interfere with the setting process. The effect of alkali treatments on the physical, mechanical, and functional properties of starch aquagels and aquagels from starch/polymer blends was investigated. Starch was blended at 100–115°C in a twin-screw extruder with five different polymers to determine whether the blends improved alkaline resistance. Polymer blends containing 5%, 15%, and 30% of the polymer hydrated and formed aquagels when equilibrated in water for 24 h. However, equilibrium moisture content was lower for the blends compared to the starch control. Aquagels equilibrated in 0.15 N NaOH swelled, lost compressive strength and had greater than 90% moisture. The blend of starch and 30% PVOH absorbed less moisture and was more resistant to alkaline dissolution in 1 N NaOH than the other blends tested making it a more suitable material for aquagel-based concrete. The moisture content of starch-based aquagels and mixing time were critical factors in determining setting times. The size of aquagel blends had a minor effect on density and compressive strength.     

EFFECTIVENESS OF POLYACRYLAMIDE (PAM) IN IMPROVING RUNOFF WATER QUALITY FROM CONSTRUCTION SITES1

ABSTRACT: Erosion from construction sites significantly affects water quality in receiving streams. A rainfall simulator was used to evaluate the effectiveness of different methods for controlling erosion from construction sites. Erosion control methods investigated included dry and liquid applications of polyacrylamide (PAM), hydroseed, and straw mulch. Fertilizer was also applied to each plot to examine the effectiveness of the methods in reducing nutrient losses in runoff. Runoff samples were analyzed for total suspended solids (TSS), nitrate, total Kjeldahl nitrogen (TKN), ammonium, total phosphorus (TP), and orthophosphate. Among all treatments investigated, straw mulch was the most effective treatment for controlling TSS and nutrient losses during short term and long term simulations. The low liquid PAM (half the recommended PAM) treatment resulted in the highest reduction in runoff, TSS bound nitrogen, and total nitrogen (TN) concentrations and loadings. The study results indicate that a high application rate (twice the recommended rate) of PAM could actually increase runoff and TSS losses. At a low application rate, both liquid and dry PAM were effective in reducing TSS and nutrient losses in runoff. However, application of the liquid form of PAM to construction sites is more practical and perhaps more economical than applying the PAM in the dry form.     

NITRATE CONCENTRATIONS IN ILLINOIS RIVERS 1967 TO 1974: COMPARISON AMONG REPORTING AGENCIES1

ABSTRACT: Long term data on surface water quality can sometimes be assembled by combining data collected by different agencies at different times and assuming that between agency differences in data quality are insignificant. The objective of this paper was to assess the quality of riverine nitrate (NO₃) concentrations in Illinois measured and reported by four agencies from 1967 to 1974 by comparing median values for similar sampling locations and periods. A total of 17 river reaches were identified for which two agencies reported NO₃ concentrations during similar periods. Nonparametric comparison of median values and analysis of covariance with discharge as a covariant produced similar results. Nitrate concentrations reported by the U.S. Geological Survey (USGS) from 1967 to 1971 were not statistically (P > 0.05) different from values reported by the Illinois State Water Survey (ISWS) for two of three river reaches. Additionally, NO₃ concentrations reported by USGS from 1972 to 1974 were not statistically different than concentrations reported by the Illinois Environmental Protection Agency (IEPA) for four of five river reaches. From 1969 to 1971, NO₃ concentrations reported by the Illinois Department of Public Heath and the Illinois Environmental Protection Agency (IDPH/IEPA) were less than one‐fourth the magnitude of values reported by ISWS. The median NO₃ concentrations measured by the Central Illinois Public Service (CIPS) were significantly greater than those measured by USGS and IDPH/IEPA in the three comparable sampling locations. The use of NO₃ concentrations measured by CIPS and IDPH/IEPA prior to 1972 is not recommended.