Lateral migration and offsite surface emission of landfill gas at City of Montreal Landfill Site

An evaluation of lateral landfill gas migration was carried out at the Saint-Michel Environmental Complex in Montreal, City of Montreal Landfill Site, Canada, between 2003 and 2005. Biogas concentration measurements and gas-pumping tests were conducted in multilevel wells installed in the backfilled overburden beside the landfill site. A migration event recorded in autumn 2004 during the maintenance shutdown of the extraction system was simulated using TOUGH-LGM software. Eleven high-density instantaneous surface monitoring (ISM) surveys of methane were conducted on the test site. Gas fluxes were calculated by geostatistical analyses of ISM data correlated to dynamic flux chamber measurements. Variograms using normal transformed data showed good structure, and kriged estimates were much better than inverse distance weighting, due to highly skewed data. Measurement-based estimates of yearly off-site surface emissions were two orders of magnitude higher than modelled advective lateral methane flux. Nucleodensimeter measurements of the porosity were abnormally high, indicating that the backfill was poorly compacted. Kriged porosity maps correlated well with emission maps and areas with vegetation damage. Pumping tests analysis revealed that vertical permeability was higher than radial permeability. All results suggest that most of the lateral migration and consequent emissions to the atmosphere were due to the existence of preferential flow paths through macropores. In December 2006, two passively vented trenches were constructed on the test site. They were successful in countering lateral migration.     

Landscape Structure and Historical Processes Along Diked European Valleys: A Case Study of the Arc/Isère Confluence (Savoie, France)

/ The valleys of European piedmonts constitute changing narrow corridors within which water, matter, nutrients, energy, and species flow. The dispersion patterns of these flows have been significantly disturbed since the end of the 18th century. Thus, western European valleys have been changed into complex mosaics by implementation of socioeconomical programs. In order to define future actions allowing the preservation of this "ecocomplex" (Blandin and Lamotte 1988), it is necessary to gather precise information of the landscape dynamics. Hence, the study of the European river valleys must be based upon two major steps: (1)the analysis of the present landscape with suitable remote sensing techniques, allowing us to map the complex mosaic of narrow corridors; and (2) the analysis of temporal landscape development patterns since the first engineering works that have transformed the braided channel system. In this paper, the efficiency of the addition of two techniques is highlighted: (1) the "wavelet merging method" from multispectral and panchromatic SPOT images for the floodplain land-cover mapping, and (2) the historical reconstruction techniques from old maps and archive documents in order to analyze the cumulative impacts of engineering works on landscape diversity. To illustrate the method, a particularly complex case study is chosen: the Arc/Isere confluence (downstream from Albertville, Savoie, France). Remote sensing, field survey, and historical reconstruction allowed us to distinguish two types of spatial units: (1) the "functional sets" characterized by independent state factors (edaphic, hydrological, and topographic) and supporting a limited number of vegetation types (spontaneous or cultivated), and (2) the functional unit (= ecotope), which corresponds to a unique combination of vegetation type/functional set.KEY WORDS: Landscape ecology; Floodplains; Vegetation; Land use; Remote sensing; Historical reconstruction; Mapping; Merging methods; Human impacts; Alps; Isere river; France     

Bioproduction of ferric sulfate used during heavy metals removal from sewage sludge

Toxic metals removal from wastewater sewage sludge can be achieved through microbial processes involving Acidithiobacillus ferrooxidans. The oxidation of ferrous ions by A. ferrooxidans, cultured in sewage sludge filtrate, was studied in both batch and continuous flow stirred tank reactors. Sewage sludge filtrate containing natural nutrients (phosphorus and nitrogen) was recovered as effluent following the dehydration of a primary and secondary sludge mixture. Batch and continuous flow stirred tank reactor tests demonstrated that A. ferrooxidans were able to grow and completely oxidize ferrous iron in a culture medium containing more than 80% (v v(-1)) sewage sludge filtrate with 10 g Fe(II) L(-1) added. Toxic levels were reached when total organic carbon in the sewage sludge filtrate exceeded 250 mg L(-1). The ferric iron solution produced in the sludge filtrate by A. ferrooxidans was used to solubilize heavy metals in primary and secondary sludge. The solubilization of Cu, Cr, and Zn yielded 71, 49, and 80%, respectively. This is comparable with the yield percentages obtained using a FeCl(3) solution. The cost of treating wastewater sewage sludge by bioproducing a ferric ion solution from sewage sludge is three times less expensive than the conventional method requiring a commercial ferric chloride solution.     

PAH removal from spiked municipal wastewater sewage sludge using biological, chemical and electrochemical treatments

Polycyclic aromatic hydrocarbons (PAHs) have been widely studied due to their presence in all the environmental media and toxicity to life. These molecules are strongly adsorbed on the particulate matters of soils, sludges or sediments because of their strong hydrophobicity which makes them less bioavailability, thus limiting their bioremediation. Different sludge treatment processes were tested to evaluate their performances for PAH removal from sludge prealably doped with 11 PAHs (5.5mg each PAH kg(-1) of dry matter (DM)): two biological processes (mesophilic aerobic digestion (MAD) and simultaneous sewage sludge digestion and metal leaching (METIX-BS)) were tested to evaluate PAH biodegradation in sewage sludge. In parallel, two chemical processes (quite similar Fenton processes: chemical metal leaching (METIX-AC) and chemical stabilization (STABIOX)) and one electrochemical process (electrochemical stabilization (ELECSTAB)) were tested to measure PAH removal by these oxidative processes. Moreover, PAH solubilisation from sludge by addition of a nonionic surfactant Tween 80 (Tw80) was also tested. The best yields of PAH removal were obtained by MAD and METIX-BS with more than 95% 3-ring PAH removal after a 21-day treatment period. Tw80 addition during MAD treatment increased 4-ring PAHs removal rate. In addition, more than 45% of 3-ring PAHs were removed from sludge by METIX-AC and during ELECSTAB process were quiet good with approximately 62% of 3-ring PAHs removal. However, little weaker removal of 3-ring PAHs (<35%) by STABIOX. None of the tested processes were efficient for the elimination of high molecular weight (> or = 5-ring) PAHs from sludge.     

Challenges in quantifying biosphere-atmosphere exchange of nitrogen species

Recent research in nitrogen exchange with the atmosphere has separated research communities according to N form. The integrated perspective needed to quantify the net effect of N on greenhouse-gas balance is being addressed by the NitroEurope Integrated Project (NEU). Recent advances have depended on improved methodologies, while ongoing challenges include gas-aerosol interactions, organic nitrogen and N(2) fluxes. The NEU strategy applies a 3-tier Flux Network together with a Manipulation Network of global-change experiments, linked by common protocols to facilitate model application. Substantial progress has been made in modelling N fluxes, especially for N(2)O, NO and bi-directional NH(3) exchange. Landscape analysis represents an emerging challenge to address the spatial interactions between farms, fields, ecosystems, catchments and air dispersion/deposition. European up-scaling of N fluxes is highly uncertain and a key priority is for better data on agricultural practices. Finally, attention is needed to develop N flux verification procedures to assess compliance with international protocols.     

Management of MSW in Spain and recovery of packaging steel scrap

Packaging steel is more advantageously recovered and recycled than other packaging material due to its magnetic properties. The steel used for packaging is of high quality, and post-consumer waste therefore produces high-grade ferrous scrap. Recycling is thus an important issue for reducing raw material consumption, including iron ore, coal and energy. Household refuse management consists of collection/disposal, transport, and processing and treatment - incineration and composting being the most widely used methods in Spain. Total Spanish MSW production exceeds 21 million tons per year, of which 28.1% and 6.2% are treated in compost and incineration plants, respectively. This paper presents a comprehensive study of incineration and compost plants in Spain, including a review of the different processes and technologies employed and the characteristics and quality of the recovered ferrous scrap. Of the total amount of packaging steel scrap recovered from MSW, 38% comes from compost plants and 14% from incineration plants. Ferrous scrap from incineration plants presents a high degree of chemical alteration as a consequence of the thermal process to which the MSW is subjected, particularly the conditions in which the slag is cooled, and accordingly its quality diminishes. Fragmentation and magnetic separation processes produce an enhancement of the scrap quality. Ferrous scrap from compost plants has a high tin content, which negatively affects its recycling. Cleaning and detinning processes are required prior to recycling.     

Depth-dependence and monthly variability of charophyte biomass production: consequences for the precipitation of calcium carbonate in a shallow <Emphasis Type="Italic">Chara</Emphasis>-lake

The month-to-month variability of biomass and CaCO₃ precipitation by dense charophyte beds was studied in a shallow Chara-lake at two depths, 1 and 3 m. Charophyte dry weights (d.w.), the percentage contribution of calcium carbonate to the dry weight and the precipitation of CaCO₃ per 1 m² were analysed from May to October 2011. Physical-chemical parameters of water were also measured for the same sample locations. The mean dry weight and calcium carbonate precipitation were significantly higher at 1 m than at 3 m. The highest measured charophyte dry weight (exceeding 2000 g m^?2) was noted at 1 m depth in September, and the highest CaCO₃ content in the d.w. (exceeding 80 % of d.w.) was observed at 3 m depth in August. The highest CaCO₃ precipitation per 1 m² exceeded 1695 g at 1 m depth in August. Significant differences in photosynthetically active radiation (PAR) were found between 1 and 3 m depths; there were no significant differences between depths for other water properties. At both sampling depths, there were distinct correlations between the d.w., CaCO₃ content and precipitation and water properties. In addition to PAR, the water temperature and magnesium and calcium ion concentrations were among the most significant determinants of CaCO₃ content and d.w. The results show that light availability seems to be the major factor in determining charophyte biomass in a typical, undisturbed Chara-lake. The study results are discussed in light of the role of charophyte vegetation in whole ecosystem functioning, with a particular focus on sedimentary processes and the biogeochemical cycle within the littoral zone.     

Enhanced science–stakeholder communication to improve ecosystem model performances for climate change impact assessments

In recent years, climate impact assessments of relevance to the agricultural and forestry sectors have received considerable attention. Current ecosystem models commonly capture the effect of a warmer climate on biomass production, but they rarely sufficiently capture potential losses caused by pests, pathogens and extreme weather events. In addition, alternative management regimes may not be integrated in the models. A way to improve the quality of climate impact assessments is to increase the science–stakeholder collaboration, and in a two-way dialog link empirical experience and impact modelling with policy and strategies for sustainable management. In this paper we give a brief overview of different ecosystem modelling methods, discuss how to include ecological and management aspects, and highlight the importance of science–stakeholder communication. By this, we hope to stimulate a discussion among the science–stakeholder communities on how to quantify the potential for climate change adaptation by improving the realism in the models.     

Arsenic and antimony distribution in the Ría de Arousa: before and after the Prestige oil tanker sinking

The behaviour of arsenic and antimony in the Ría de Arousa (Galicia, north west of Spain) and the influence of the Prestige accident in the estuary is evaluated. As and Sb were simultaneously determined by HG-ICPOES in seawater samples after a preconcentration with La in a knotted reactor. The highest As concentration is in the inner and middle parts of the ría where the current is weaker and next to the main ports of the area. The largest Sb concentrations were found in the bay of the ría. Linear variation of concentration vs. salinity for As and As/Sb ratios indicated that there was no pollution in the waters of Arousa. The Prestige oil spillage had no serious influence and the values of arsenic (most of them <1.5 microg L(-1)) are similar to the average oceanic concentration, whereas concentrations for antimony (most of them <0.15 microg L(-1)) are less than the oceanic ones.     

Acid Particles and the Tracheobronchial Region of the Respiratory System—An “Irritation-Signaling” Model for Possible Health Effects

This paper explores some detailed mechanistic hypotheses for the possible action of acid particles on the tracheobronchial region of the human respiratory system. Because of the buffering capacity and volume of mucus produced per day it appears doubtful that ordinary ambient exposures to acid particles could markedly change the overall pH of tracheobronchial mucus considered as a whole. However it is possible that individual acidic particles could contain enough acid to deliver localized “irritant signals” that could be the triggers for enhanced mucus secretion and cell division in sensitive portions of the bronchial tree, and thereby contribute to the processes involved in chronic bronchitis.

Depending on the exact pH depression required for a “signal” to be perceived by the tracheobronchial epithelium, the acid content of the incoming particles per unit weight, and the effect of neutralization by ammonia in the upper respiratory tract, the minimum size of an acidic particle required to deliver a perceptible signal might range from about 0.4 to 0.7 microns for portions of the epithelium that are frequently swept by 4-micron mucus droplets. (For unprotected epithelium, however, it is conceivable that the minimum effective size for acid particles could be less.) Since particle number per unit weight declines dramatically with increasing particle size, the most potent fraction of particles in terms of signals delivered per μg/m³is likely to be just above the minimum size that is needed to produce an effective signal. The model developed here makes predictions of the relative potency of particles of different size and acid delivery capacity that could be tested in both experimental animal systems and human epidemiological studies.