An integrated assessment of estrogenic contamination and biological effects in the aquatic environment of The Netherlands

An extensive study was carried out in the Netherlands on the occurrence of a number of estrogenic compounds in surface water, sediment, biota, wastewater, rainwater and on the associated effects in fish. Compounds investigated included natural and synthetic hormones, phthalates, alkylphenol(ethoxylate)s and bisphenol-A. The results showed that almost all selected (xeno-)estrogens were present at low concentrations in the aquatic environment. Locally, they were found at higher levels. Hormones and nonylphenol(ethoxylate)s were present in concentrations that are reportedly high enough to cause estrogenic effects in fish. Field surveys did not disclose significant estrogenic effects in male flounder (Platichthys flesus) in the open sea and in Dutch estuaries. Minor to moderate estrogenic effects were observed in bream (Abramis brama) in major inland surface waters such as lowland rivers and a harbor area. The prevalence of feminizing effects in male fish is largest in small regional surface waters that are strongly influenced by sources of potential hormone-disrupting compounds. High concentrations of plasma vitellogenin and an increased prevalence of ovotestes occurred in wild male bream in a small river receiving a considerable load of effluent from a large sewage treatment plant. After employing in vitro and in vivo bioassays, both in situ and in the laboratory, we conclude that in this case hormones (especially 17 alpha-ethynylestradiol) and possibly also nonylphenol(ethoxylate)s are primarily responsible for these effects.     

The accumulation of metals and toxic effects in Nereis virens exposed to pulverised fuel ash

The marine polychaete worm Nereis virens was used to study the bioaccumulation patterns of metal exposures with pulverised fuel ash (PFA). Juvenile N. virens were exposed for 12 weeks to sediments comprised of 100% PFA, 50% PFA-50% clean sand, a reference sediment (contaminated harbour-dredged material) and a clean sand control. Mortality after the first 4 weeks was high at 32–45% in the four sediments. However, this declined to a few percent during the following 8 weeks. Growth expressed as biomass (wet weight) was reduced in bout PFA treatments and the reference sediment. Heavy metal accumulation in the tissues of N. virens was characterised as follows: a group of elements showed negligible to low accumulation (Cd, Cr, Ni, and Zn), As and Cu wich showed a definite, but moderate accumulation: and finally Se, which showed a low accumulation rate, where an uptake equilibrium was not reached after 9 weeks. It is concluded that acute toxic effects did not occur but a population of N. virens inhabiting a PFA dumping site could be affected by high Se concentrations.     

Sex-specific energy requirements in nestlings of an extremely sexually size dimorphic bird, the European sparrowhawk (Accipiter nisus)

Allocation of parental investment is predicted to be equal at the population level between both sexes of offspring, and should lead to sex ratio biases in species that exhibit a sex-difference in parental care. Sex-differences in parental care are rarely quantified. We measured daily energy expenditure in free-living nestlings of the extremely sexually size dimorphic European sparrowhawk (Accipiter nisus), using the doubly labelled water method. These data were combined with measured growth characteristics to estimate daily and total metabolised energy intake of male and female young during the nestling stage. Females reached an asymptotic body mass 1.6 times higher than males. This resulted in a total metabolised energy an estimated 1.4 times higher for the nestling stage. Furthermore, we observed a decline in daily metabolised energy with an increase in brood size, which was significantly stronger for females than for males. These results are discussed in the context of Fishers equal allocation theory. Empirical evidence of a sex ratio bias at the end of parental care, with an overall excess of males, is lacking in this species. Consequently, our data do not support the idea of equal allocation between the sexes. The observed sex difference in daily metabolised energy in response to brood size may give scope for sex ratio bias at the level of the individual brood.     

Two-phase jet releases,droplet dispersion and rainout,II. Rainout experiments

This paper describes the results of the first experimental stage of Phase IV of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. The objective of this stage of the JIP was to generate experimental rainout data for non-flashing water and xylene experiments. See the overview companion paper I for a wider overview of the problem, model implementation and associated model validation.A range of orifice sizes (2.5 and 5 mm) and stagnation pressures (4–16 barg) were applied. Measurements included flow rate, initial droplet size, plume concentrations/temperatures for a range of downstream locations, and distributed rainout.Instead of the Phase Doppler Anemometry method used for droplet size measurements earlier in the JIP, a photographic technique was applied in an attempt to include measurement of the larger (non-spherical) droplets. This enabled a more accurate evaluation of the initial droplet size distribution and a much clearer understanding of the droplet morphology. The results showed that the droplet behaviour in the jet is more complex than had been anticipated with the mass distribution dominated by a very small number of large non-spherical droplets. Consequently a large number of spray images were required to evaluate an accurate size distribution.Distributed rainout was measured by weighing the amount of rainout in trays positioned along the jet direction. The rainout results showed a good degree of repeatability and internal consistency. They indicated that an increasing proportion of the released material did not rainout for increasing pressure. Rainout distance also increased with increasing pressure. Evaporation of the liquid was confirmed by temperature measurements, which showed the effect of evaporative cooling.Xylene concentration measurements (up to 1%) were carried out using a direct reading photoionization detector calibrated for xylene (measuring vapour only). For a limited dataset, the accuracy of these measurements was estimated by means of comparison against an alternative more time-consuming concentration method (xylene absorption onto a charcoal filter; measuring both vapour and liquid). The concentration measurements displayed several consistent qualitative features. For example, at a given downstream distance, the peak concentration increases with increasing pressure and nozzle diameter and the vertical height at which the peak is achieved increases. The cross-stream profiles displayed a consistent tendency to increased concentration at the edge of the jet, and the reason for this has not been established.Finally recommendations are provided for potential future work.     

Trace Metal Uptake By Pichia Spartinae, an Endosymbiotic Yeast in the Salt Marsh Cord Grass Spartina Alterniflora

The ascosporogenous marine yeast Pichia spartinae is a dominant endosymbiont of the marsh grass Spartina alterniflora. Results of previous studies suggested that P. spartinae is involved in iron transport processes in the grass. of particular interest has been the mechanisms of metal uptake and metabolism by the yeast, and the ecological and plant biochemical significance of these processes. This investigation examined the uptake of iron and other metals (Zn, Cu, Cd, Ni, Pb, Cr) by P. spartinae, and provides data on possible mechanisms of this activity. the results suggest a) the yeast can assimilate divalent and trivalent forms of inorganic iron, as well as large organic-Fe(III) complexes, b) the uptake of inorganic trivalent iron under soluble iron-deficient conditions proceeded by a different mechanism than that of soluble Fe(II), with intracellular loadings of iron much increased under the former conditions; c) trivalent iron uptake is not mediated by hydroxamate siderophores at levels detectable by sensitive screening assays; d) the assimilation of some trace metals (Cu, Zn, Cd, Ni) is likely to be mediated by low molecular weight cysteine rich proteins, possibly metallothionein, and; e) siderophores from other fungi can provide iron for P. spartinae. the iron assimilation data suggested that multiple mechanisms are involved, and are influenced by the concentration and speciation of iron in the system. in general, iron assimilation mechanisms are comparable to those described for closely related yeasts, such as Saccharomyces cerevisiae. Among other things, these results indicated that future studies of trace metal mobilization and plant assimilation in salt marsh ecosystems must account for the activities of microbial symbionts associated with the plants.     

Determining patterns of variability in ecological communities: time lag analysis revisited

All ecological communities experience change over time. One method to quantify temporal variation in the patterns of relative abundance of communities is time lag analysis (TLA). It uses a distance-based approach to study temporal community dynamics by regressing community dissimilarity over increasing time lags (one-unit lags, two-unit lags, three-unit lags). Here, we suggest some modifications to the method and revaluate its potential for detecting patterns of community change. We apply Hellinger distance based TLA to artificial data simulating communities with different levels of directional and stochastic dynamics and analyse their effects on the slope and its statistical significance. We conclude that statistical significance of the TLA slope (obtained by a Monte Carlo permutation procedure) is a valid criterion to discriminate between (i) communities with directional change in species composition, regardless whether it is caused by directional abundance change of the species or by stochastic change according to a Markov process, and (ii) communities that are composed of species with population sizes oscillating around a constant mean or communities whose species abundances are governed by a white noise process. TLA slopes range between 0.02 and 0.25, depending on the proportions of species with different dynamics; higher proportions of species with constant means imply shallower slopes; and higher proportions of species with stochastic dynamics or directional change imply steeper slopes. These values are broadly in line with TLA slopes from real world data. Caution must be exercised when TLA is used for the comparison of community time series with different lengths since the slope depends on time series length and tends to decrease non-linearly with it.     

Relationships between street characteristics and perceived attractiveness for walking reported by elderly people

Walking is important for the health of elderly people. Previous studies have found a relationship between neighbourhood characteristics, physical activity and related health aspects. The multivariate linear regression model presented here describes the relationships between the perceived attractiveness of streets for walking along and (physical) street characteristics. Two hundred and eighty-eight independently living elderly people (between 55 and 80 years old) participated in the study. Street characteristics were assessed along homogeneous street subsections defined as ‘links’. Positively related to perceived attractiveness of links were the following street characteristics: slopes and/or stairs, zebra crossings, trees along the route, front gardens, bus and tram stops, shops, business buildings, catering establishments, passing through parks or the city centre, and traffic volume. Litter on the street, high-rise buildings, and neighbourhood density of dwellings were negatively related to perceived link attractiveness. Overall, the results suggest that three main aspects affect perceived attractiveness of streets for walking, namely tidiness of the street, its scenic value and the presence of activity or other people along the street. The results are discussed within the context of these three aspects.     

Analysis of underlying causes of investigated loss of containment incidents in Dutch Seveso plants using the Storybuilder method

In the Netherlands there are around 400 “Seveso” sites that fall under the Dutch Major Hazards Decree (BRZO) 1999. Between 2006 and 2010 the Dutch Labour Inspectorate's Directorate for Major Hazard Control completed investigations of 118 loss of containment incidents involving hazardous substances from this group. On the basis of investigation reports the incidents were entered in a tailor-made tool called Storybuilder developed for the Dutch Ministry of Social Affairs and Employment for identifying the dominant patterns of technical safety barrier failures, barrier task failures and underlying management causes associated with the resulting loss of control events. The model is a bow-tie structure with six lines of defence, three on either side of the central loss of containment event. In the first line of defence, failures in the safety barriers leading to loss of control events were primarily equipment condition failures, pre start-up and safeguarding failures and process deviations such as pressure and flow failures. These deviations, which should have been recovered while still within the safe envelope of operation, were missed primarily because of inadequate indication signals that the deviations have occurred. Through failures of subsequent lines of defence they are developing into serious incidents. Overall, task failures are principally failures to provide adequate technical safety barriers and failures to operate provided barriers appropriately. Underlying management delivery failures were mainly found in equipment specifications and provisions, procedures and competence. The competence delivery system is especially important for identifying equipment condition, equipment isolation for maintenance, pre-start-up status and process deviations. Human errors associated with operating barriers were identified in fifty per cent of cases, were mostly mistakes and feature primarily in failure to prevent deviations and subsequently recover them. Loss of control associated with loss of containment was primarily due to the containment being bypassed (72% of incidents) and less to material strength failures (28%). Transfer pipework, connections in process plant and relief valves are the most frequent release points and the dominant release material is extremely flammable. It is concluded that the analysis of a large number of incidents in Storybuilder can support the quantification of underlying causes and provide evidence of where the weak points exist in major hazard control in the prevention of major accidents.