Assessing the influence of altitude and temperature on biological monitoring of freshwater quality: A preliminary investigation

The effect of altitude and water temperature on biomonitoring of freshwater quality was examined along an unpolluted area (36 km in length) of the upper Río Tajo (central Spain). The macrobenthic and fish communities were studied, and the Biological Monitoring Water Quality (BMWQ) method was applied. As expected, values of altitude and temperature respectively decreased and increased with increasing distance from the river source; these two physical parameters exhibited a negative and significant (P<0.05) correlation coefficient between them. However, despite evident changes in the functional structure of both aquatic communities along the study area, BMWQ scores were similar at all sampling sites. Pearson correlation coefficients between physical and biological parameters were not significant (P>0.05). The BMWQ index only exhibited significant (positive) correlation coefficients with macrobenthic and fish biomasses, indicating that freshwater quality could affect the biological production of fluvial ecosystems. It is concluded that biomonitoring of freshwater quality may be independent of the influence of altitude and water temperature at local spatial scales. Nonetheless, further investigations would be needed to clearly differentiate between the effects of anthropogenic and natural causes on biological monitoring at larger spatial scales.     

Bone histology of the titanosaur <Emphasis Type="Italic">Lirainosaurus astibiae</Emphasis> (Dinosauria: Sauropoda) from the Latest Cretaceous of Spain

The titanosaur Lirainosaurus astibiae is the only sauropod species known from the Late Cretaceous of the Iberian Peninsula. Lirainosaurus did not reach a gigantic body size and is one of the smallest sauropods discovered to date. Histological analysis of Lirainosaurus bones, focused on diaphyseal transverse sections of appendicular elements, reveals that Lirainosaurus did not exhibit the osseous microstructure typical for large sauropods, but is comparable with that of the coeval titanosaurs Alamosaurus sanjuanensis, Ampelosaurus atacis, and Magyarosaurus dacus, and also shares histological traits with other small to medium-sized sauropodomorph dinosaurs. Lirainosaurus limb bones exhibit a laminar fibrolamellar bone microstructure interrupted by growth marks, fully obliterated in adulthood by intense secondary remodeling processes which tend to replace completely the primary cortex. Lirainosaurus attained smaller sizes than typical sauropods reducing the rate of primary periosteal osteogenesis and developing an extensive secondary remodeling well before the adult size was reached. Histological organization of Lirainosaurus long bones is more mature than observed in basal neosauropods at similar ontogenetic stage, documenting a case of peramorphosis by pre-displacement. This heterochronic growth would be a reversal of the accelerated pattern of bone deposition typical for the sauropod lineage.     

Effect of Fe (III) on acid degradation of methylparathion

A study was undertaken to determine the transformation kinetic of methylparathion (O, O, -dimethyl O-4 nitrophenylphosphorotioate) in the presence of Fe(III) between pH 2 and 7. The Fe(III) was not electroactive under the conditions used in this study, and polarographic signals were exhibited by methylparathion and main degradation product only. Data suggest that hydrolysis of methylparathion in an acid medium is catalyzed by Fe(III) and the pesticide did not degrade in this medium without this cation. Methylparathion degradation was observed at all the pHs studied and was independent of the predominant chemical form of Fe(III) in the aqueous medium. The reaction was first-order with pH-dependent rate constant (k) values ranging from 3.3 x 10(- 3) h(- 1) to 7.0 x 10(- 3) h(- 1). The k values increased as pH decreased, suggesting that Fe(III) acted as an electrophile in the reaction mechanism.     

Environmental implications of planned obsolescence and product lifetime: a literature review

The aim of this paper was to explore the implications of planned obsolescence (PO) and the associated product lifetime on the environmental impact of products. To achieve this task, a literature review was performed to assess both the historical context and recent situation of planned obsolescence. A search in scholarly journals was performed to evaluate to what extent product lifetime and PO have been discussed in the recent literature. Based on the findings, selected cases of PO are discussed and trends in the practice of limiting product lifetime are identified. Factors considered to have a significant influence on product lifetime have been identified and discussed. The discussion of case studies made it possible to establish the links between product design, manufacturing and associated impacts of lifetime. The role of the actors along the value chain is also considered to propose a business scheme, where the influences of consumer behaviour and design choices are crucial. Finally, strategies to facilitate the definition of different scenarios are given. These strategies may serve to increase the reliability of environmental assessment throughout a product life cycle.     

Influence of boundary conditions on CMAQ simulations over the Iberian Peninsula

The influence of chemical boundary conditions (BC) on the response of the Community Multiscale Air Quality (CMAQ) model over the Iberian Peninsula was investigated in this study. Three strategies to supply boundary conditions in the context of the Integrated Assessment Modelling System for the Iberian Peninsula (SIMCA) were tested. Alternative methods consist in providing BC from (1) fixed, time-independent, concentration profiles, (2) concentrations predicted in a CMAQ mother domain (48 km, 1 h resolution) and (3) concentration values from the GEOS-Chem chemical-transport global model (2 × 2.5°, 3 h resolution). High resolution (3 km) simulated concentrations of the main pollutants (NO₂, NO, SO₂, O₃, PM₁₀ and PM_2.5) were compared through a comprehensive statistical analysis including observational data from 165 monitoring stations all over the Iberian Peninsula. It was found that model sensitivity to BC for nitrogen and sulphur oxides was limited, being restricted to the vicinity of model boundaries. However, significant domain-wide differences were found when modelling ozone and PM depending on the BC provided to run the tests. Although model performance was affected by spatial and seasonal factors, the results indicate that model-derived, dynamic BC improved CMAQ predictions when compared to those based on static concentrations prescribed in the boundaries. Aggregated statistics suggest that the GEOS-Chem produced the best results for O₃ and PM_2.5 while NO₂ and PM₁₀ were slightly better predicted under the CMAQ nesting approach. Besides the statistical evaluation some other relevant issues in the context of Integrated Assessment Modelling (IAM) are discussed to gain a better insight into the suitability of the methods analyzed and limitations of downscaling methods. Despite being useful to get a better understanding of the role of BC in SIMCA, this study contributed to highlight model deficiencies and therefore to point out future research needs to improve IAM activities in the Iberian Peninsula.     

Demonstrating Contaminant Degradation at an MGP Site With Metabolic Gas Flux and Radio Carbon Dating

Obtaining lines of evidence indicating that contamination in sediment environments is degrading and being transformed to less toxic forms is an important component of building support for a monitored natural recovery remedy for contaminated sediments. This project was a field demonstration of manufactured gas plant contaminant degradation in river sediments using metabolic gas flux and was performed in an urban area section of a river in northeastern Indiana. CO₂ sorbent traps were deployed to measure CO₂ flux from the river sediments. Sediment samples were collected and analyzed for polycyclic aromatic hydrocarbon (PAH) concentrations and for microbial community composition using molecular techniques. The results showed that the deployment was successful, measuring CO₂ flux at all sediment locations and demonstrating that microbial contaminant degrading activity was occurring in the sediments. Radio carbon dating showed a significant portion of the CO₂ being generated (approximately 19–27 percent) was the result of fossil fuel degradation. Molecular results showed that the microbial community consisted of phylotypes known to be associated with monocyclic aromatic and PAH degradation. ©2017 Wiley Periodicals, Inc.     

Methane generation in tropical landfills: simplified methods and field results

This paper deals with the use of simplified methods to predict methane generation in tropical landfills. Methane recovery data obtained on site as part of a research program being carried out at the Metropolitan Landfill, Salvador, Brazil, is analyzed and used to obtain field methane generation over time. Laboratory data from MSW samples of different ages are presented and discussed; and simplified procedures to estimate the methane generation potential, Lo, and the constant related to the biodegradation rate, k are applied. The first order decay method is used to fit field and laboratory results. It is demonstrated that despite the assumptions and the simplicity of the adopted laboratory procedures, the values Lo and k obtained are very close to those measured in the field, thus making this kind of analysis very attractive for first approach purposes.     

Prevalence of chromosomal aberrations in Argentinean agricultural workers

Environmental Science and Pollution Research - Little is known about biosecurity measures and toxic effects during pesticide application in the province of Jujuy, Argentina, particularly concerning...     

Effect of some heavy metals and soil humic substances on the phytochelatin production in wild plants from silver mine areas of Guanajuato, Mexico

Phytochelatins (PCs) were determined in the wild plants, focusing on their relationship with the levels of heavy metals and humic substances (HS) in soil. Ricinus communis and Tithonia diversifolia were collected from several sites in Guanajuato city (Mexico), which had long been the silver and gold mining center. The analysis of PCs in root extracts was carried out by liquid chromatography (derivatization with monobromobimane). Total Ag, Cd, Cu and Pb in plant roots and in soil samples, as well as soil HS were determined. The association of metals with HS in soils was evaluated by size exclusion chromatography (SEC) with UV and ICP-MS detection. The results obtained revealed the induction of PCs in R. communis but not in T. diversifolia. The levels of Cd and Pb in plant roots presented strong positive correlation with PC-2 (r = 0.9395, p = 0.005; r = 0.9573, p = 0.003, respectively), indicating that these two metals promote PCs induction in R. communis. On the other hand, the inverse correlation was found between soil HS and metal levels in roots of R. communis (Cu > Pb > Cd > Ag), in agreement with the decreasing affinity of these metals to HS. Importantly, the inverse correlation between soil HS and plant PC-2 was observed (r = −0.7825, p = 0.066). These results suggest that metals strongly bound to HS could be less bioavailable to plants, which in turn would limit their role in the induction of PCs. Indeed, the SEC elution profiles showed Pb but not Cd association with HS and the correlation between metal in soil and PC-2 in plant was statistically significant only for Cd (r = 0.7857, p = 0.064). Based on these results it is proposed that the role of heavy metals in PCs induction would depend on their uptake by R. communis, which apparently is controlled by the association of metals with soil HS. This work provides further evidence on the role of environmental conditions in the accumulation of heavy metals and phytochelatin production in plants.     

Effects of reduced contaminant loading on downgradient water quality in an idealized two-layer granular porous media

The following explores the issue of how reductions in contaminant loading to plumes will effect downgradient water quality. An idealized scenario of two adjacent layers of uniform geologic media, one transmissive and the other low permeability, is considered. A high concentration source, similar to a thin DNAPL pool, is introduced in the transmissive layer immediately above the low permeability layer. While the source is active, dissolved constituents are driven along the contact by advection and into the low permeability layer by transverse diffusion. Removing the source reverses the concentration gradient between the layers, driving back diffusion of contaminants from the low permeability layer. Laboratory studies involving four contaminants demonstrate that 15 to 44% of the introduced contaminant moves into the low permeability zone (along a distance of 87 cm in a sand tank) over a period of 25 days. The greatest movement of contaminants into the low permeability zone is seen with the contaminants with the greatest sorption coefficients. A unique two-dimensional analytical solution is developed for the two-layer scenario. Processes addressed include advection; transverse dispersion; adsorption and degradation in the transmissive zones; and diffusion, adsorption, and degradation in the low permeability layer. Laboratory data agree favorably with the analytical solutions. Collectively, the laboratory results and analytical solutions provide a basis for testing other modeling approaches that can be applied to more complex problems. A set of field-scale scenarios are considered using the analytical solutions. Results indicate that improvement in water quality associated with source removal diminish with distance downgradient of the source. Furthermore, contaminant degradation and contaminant adsorption in the stagnant zone are shown to be critical factors governing the timing and magnitude of downgradient improvements in water quality. For five of six scenarios considered, observed improvements in water quality 100 m downgradient of the source fall in the range of 1 to 2 orders of magnitude 15 years after complete source removal. The sixth scenario, involving a contaminant half-life of three years and no adsorption, shows greater than three order of magnitude improvements in downgradient water quality within one year of source removal.