Morphological and cytogenetic analysis of intact oocytes and blocked zygotes

We examined cytological and cytogenetic parameters of 1076 oocytes and 385 zygotes that failed to develop post in vitro fertilization (IVF) and intracytoplasmic sperm injection (ICSI). Out of 1076 oocytes, 894 (83%) arrested oocytes showed a first polar body and were thus assumed arrested at metaphase II while the remainder showed no polar body. In the group of oocytes with a polar body, 20.5% had an abnormal karyotype. Cytologically, premature sperm chromosome condensation was noted in 28.3% of uncleaved oocytes. This high PCC can be explained by the different grades of oocyte maturity from one center to another. Oocytes from older women showed no increased aneuploidy but did show increased premature chromosome condensation. Analysis by classical technique of 220 uncleaved zygotes showed 91 with highly condensed chromosomes, 53 with asynchrony of condensation, 31 with pulverized chromosomes, and 45 arrested at the first somatic metaphase. Out of 385 arrested zygotes, 165 were explored by in situ hybridization. FISH using a set of 7 chromosome-specific probes showed aneuploidy in the chromosomes analyzed (13, 16, 18, 21, 22, X, Y) in 21.8% of blocked zygotes (19–25% depending on morphology). Extrapolating to other chromosomes, we expect that a vast majority of blocked zygotes and oocytes probably carry chromosome abnormalities. These data demonstrate the contributions of chromosome disorder in early embryo development blocking and implantation failure. Certainly, the issue of cytoplasm and nuclear immaturity and their relation to each other and to chromosome abnormalities provides a fertile area for future investigation in ART. Copyright © 2003 John Wiley & Sons, Ltd.     

Modelling leachate quality and quantity in municipal solid waste landfills.

The operational phase of landfills may last for 20 years or more. Significant changes in leachate quality and generation rate may occur during this operational period. A mathematical model has been developed to simulate the landfill leachate behaviour and distributions of moisture and leachate constituents through the landfill, taking into consideration the effects of time-dependent landfill development on the hydraulic characteristics of waste and composition of leachate. The model incorporates governing equations that describe processes influencing the leachate production and biochemical processes taking place during the stabilization of wastes, including leachate flow, dissolution, acidogenesis and methanogenesis. To model the hydraulic property changes occurring during the development stage of the landfills, a conceptual modelling approach was proposed. This approach considers the landfill to consist of cells or columns of cells, which are constructed at different times, and considers each cell in the landfill to consist of several layers. Each layer is assumed to be a completely mixed reactor containing uniformly distributed solid waste, moisture, gases and micro-organisms. The use of the proposed conceptual model enables the incorporation of the spatial changes in hydraulic properties of the landfill into the model and also makes it possible to predict the spatial and temporal distributions of moisture and leachate constituents. The model was calibrated and partially verified using leachate data from Keele Valley Landfill in Ontario, Canada and data obtained from the literature. Ranges of values were proposed for model parameters applicable for real landfill conditions.     

A decision support system for assessing landfill performance

Designing environmentally sound landfills is a challenging engineering task due to complex interactions of numerous design variables; such as landfill size, waste characteristics, and site hydrogeology. Decision support systems (DSS) can be utilized to handle these complex interactions and to aid in a performance-based landfill design by coupling system simulation models (SSM). The aim of this paper is to present a decision support system developed for a performance-based landfill design. The developed DSS is called Landfill Design Decision Support System – LFDSS. A two-step DSS framework, composed of preliminary design and detailed design phases, is set to effectively couple and run the SSMs and calculation modules. In preliminary design phase, preliminary design alternatives are proposed using general site data. In detailed design phase, proposed design alternatives are further simulated under site-specific data using SSMs for performance evaluation. LFDSS calculates the required landfill volume, performs landfill base contour design, proposes preliminary design alternatives based on general site conditions, evaluates the performance of the proposed designs, calculates the factor of safety values for slope stability analyses, and performs major cost calculations. The DSS evaluates the results of all landfill design alternatives, and determines whether the design satisfies the predefined performance criteria. The DSS ultimately enables comparisons among different landfill designs based on their performances (i.e. leachate head stability, and groundwater contamination), constructional stability and costs. The developed DSS was applied to a real site, and the results demonstrated the strengths of the developed system on designing environmentally sound and feasible landfills.     

The results of aneuploidy screening in 276 couples undergoing assisted reproductive techniques

Preimplantation genetic diagnosis for aneuploidy screening (PGD-AS) using sequential in situ hybridization was applied for aneuploidy testing in 276 couples with 282 ART cycles. Patients with advanced maternal age (AMA, n = 147), recurrent implantation failure (RIF, n = 48), repeated early spontaneous abortion (RSA, n = 32) and abnormal gamete cell morphology (AGCM, n = 55) including macrocephal sperm forms or cytoplasmic granular oocytes were included. Embryo biopsy was performed on day 3 in a calcium–magnesium–free medium by using a noncontact diode laser system. After fixation and enzymatic treatment, fluorescent in situ hybridization (FISH) was carried out on 1147 blastomeres with specific probes for chromosomes 13, 16, 18, 21 and 22 for AMA group, 13, 18, 21, X and Y for AGCM group and 13, 16, 18, 21, 22, X and Y for RIF and RSA groups respectively. The overall chromosomal abnormality rate in analyzed embryos was 40.9%, with no significant difference between AMA, RIF and RSA groups (p > 0.05). However, AGCM group presented a higher rate of chromosomal aneuploidies (57.4%) than the other three groups (p < 0.01). A total of 84% biopsied embryos presented cleavage in 24 h and embryo transfer was realized in 278 cycles. In four cycles, no chromosomally normal embryo was found for embryo transfer. A total of 88 pregnancies (31.6%) were achieved, 19.3% resulted in abortion and 63 healthy births were obtained, with a total of 93 babies born. Aneuploidy testing in couples with poor prognosis undergoing ART cycles is a useful tool to increase the chance of ART success. Furthermore, abnormal gamete cell morphology should be considered one of the major indications for PGD in ART programs as high aneuploidy rates were observed in this group. Copyright © 2004 John Wiley & Sons, Ltd.     

An Overview of Solid Waste Management and Plastic Recycling in Qatar

Municipal solid waste management (MSWM) constitutes one of the most crucial health and environmental problems facing authorities in the Arabian Gulf. Recent literature on current solid waste management (SWM) in Qatar has been reviewed in this paper, and a focused study has been carried out to provide a review on the total amount of municipal solid waste generated, stored, collected, disposed as well as the constituents of the waste. The analysis showed that Qatar produced around 2,000,000 tons of solid municipal waste annually, corresponding to a daily generation rate per capita of about 2.5 kg. About 60% of MSW is organic material and about 300 kg is composed daily. Landfill and composting is considered the most appropriate waste disposal techniques in Qatar. Um-Al-Afai landfill has nearly 80% of MSW. Because of the increased migration in Qatar, there is a sharp rise in the volume and also in the variety of solid waste. It is important to alleviate societal concerns over the increased rate of resource consumption and waste production; thus, policy makers have encouraged recycling and reuse strategies to reduce the demand for raw materials and to decrease the quantity of waste going to landfill. An example of the benefit of mechanical recycling of plastics compared to land filling and composting was conducted by GaBi 4 life cycle analysis tool which showed the benefits to the global warming and human toxicity. Recycling is the favored solution for plastic waste management, because it has a lower environmental impact on the defined impact categories, from Global Warming Potential (GWP) and Human Toxicity Potentials (HTP) indicators.     

A puzzle over ecological footprint,energy consumption and economic growth: the case of Turkey

Environmental and Ecological Statistics - The paper investigates the non-linear causality from energy consumption and economic growth to ecological footprint for the case of Turkey by employing...     

Fuzzy multicriteria disposal method and site selection for municipal solid waste

The use of fuzzy multiple criteria analysis (MCA) in solid waste management has the advantage of rendering subjective and implicit decision making more objective and analytical, with its ability to accommodate both quantitative and qualitative data. In this paper a modified fuzzy TOPSIS methodology is proposed for the selection of appropriate disposal method and site for municipal solid waste (MSW). Our method is superior to existing methods since it has capability of representing vague qualitative data and presenting all possible results with different degrees of membership. In the first stage of the proposed methodology, a set of criteria of cost, reliability, feasibility, pollution and emission levels, waste and energy recovery is optimized to determine the best MSW disposal method. Landfilling, composting, conventional incineration, and refuse-derived fuel (RDF) combustion are the alternatives considered. The weights of the selection criteria are determined by fuzzy pairwise comparison matrices of Analytic Hierarchy Process (AHP). It is found that RDF combustion is the best disposal method alternative for Istanbul. In the second stage, the same methodology is used to determine the optimum RDF combustion plant location using adjacent land use, climate, road access and cost as the criteria. The results of this study illustrate the importance of the weights on the various factors in deciding the optimized location, with the best site located in Çatalca. A sensitivity analysis is also conducted to monitor how sensitive our model is to changes in the various criteria weights.