Use of lignite in power generation has led to increasing environmental problems associated not only with gaseous emissions but also with the disposal of ash residues. In particular, use of low quality coal with high ash content results in huge quantities of fly ash to be disposed of. The main problem related to fly ash disposal is the heavy metal content of the residue. In this regard, experimental results of numerous studies indicate that toxic trace metals may leach when fly ash contacts water. In this study, fly ash samples obtained from thermal power plants, namely Soma and Tunçbilek, located at the west part of Turkey, were subjected to toxicity tests such as European Committee for standardization (CEN) and toxicity characteristic leaching (TCLP) procedures of the U.S. Environmental Protection Agency (U.S. EPA). The geochemical composition of the tested ash samples from the power plant show variations depending on the coal burned in the plants. Furthermore, the CEN and TCLP extraction results showed variations such that the ash samples were classified as `toxic waste' based on TCLP result whereas they were classified as `non-toxic' wastes based on CEN results, indicating test results are pH dependent. 相似文献
This study is focused on the preparation, characterization, and determination of thermal properties and thermal reliability
of paraffin/polypropylene (PP) composite as a novel form-stable phase change material (PCM) for thermal energy storage applications.
In the composite, paraffin acts as a PCM when PP is operated as supporting material. The composites prepared at different
mass fractions of paraffin (50, 60, 70, 80, and 90 w/w%) by solution casting method were subjected to leakage test by heating
the composites over the melting temperature of the PCM. The paraffin/PP composite (70/30 w/w%) is found as the maximum paraffin
containing composite and was characterized using Fourier transform infrared spectroscopy, optic microscopy, differential scanning
calorimetry (DSC), and thermal gravimetric analysis (TGA) techniques. DSC analysis indicated that the form-stable paraffin/PP
composite melts at 44.77–45.52 °C and crystallizes at 53.55–54.80 °C. It has latent heats of 136.16 and −136.59 J/g for melting
and crystallization, respectively. These thermal properties make it potential PCM for latent heat thermal energy storage (LHTES)
purposes such as solar space heating applications. Accelerated thermal cycling tests indicated that the form-stable PCM had
good thermal reliability. TGA also showed that the form-stable PCM degrades in two distinguishable steps and had good chemical
stability. 相似文献
Cadmium and lead were determined simultaneously in seawater by differential pulse stripping voltammetry (DPSV) preceded by
adsoptive collection of complexes with 8-hydroxyquinoline (oxine) on to a hanging mercury drop electrode (HMDE). In preliminary
experiments the optimal analytical condition for oxine concentration was found to be 2.10−5 M, at pH 7.7, the accumulation potential was −1.1 V, and the initial scannig potential was −0.8 V. The peak potentials were
found −0.652 V for Cd and −0.463 V for Pb At the 60 s accumalation time. The limit of detection (LOD) and limit of quantitatification
(LOQ) were found to be by voltammetry as 0.588 and 1.959 μg l−1 (RSD, 5.50%) for Cd and 0.931 and 3.104 μg l−1 (RSD, 4.10%) for Pb at 60 s stirred accumulation time respectively. In these conditions the most of the seawater samples
are amenable for direct voltammetric determination of cadmium and lead using a HMDE. An adsorptive stripping mechanism of
the electrode reaction was proposed. For the comparison, seawater samples were also analysed by ICP-atomic emission spectrometry
method (ICP-AES). The applied voltammetric technique was validated and good recoveries were obtained. 相似文献
Melatonin (MT) and nitric oxide (NO) are known as scavengers of free radicals and an antioxidant against biotic and abiotic stresses in plant defense systems. However, whether NO interplays role in MT-induced antioxidant defense remains to be determined in the plants exposed to lead (Pb) toxicity. So, two experiments were designed to evaluate the role of NO in MT-mediated tolerance of maize plants to Pb stress. In the initial experiment, prior to starting different treatments, a solution of 0.05- or 0.10-mM MT was sprayed every other day for a period of 10 days to the leaves of maize plants exposed to Pb stress (0.1-mM PbCl2). Pb toxicity significantly caused reduction in plant biomass (both fresh and dry), PSII maximum efficiency (Fv/Fm), total chlorophyll, leaf potassium (K), calcium (Ca), and leaf water potential, but it resulted in increased levels of proline, hydrogen peroxide (H2O2), malondialdehyde (MDA), electron leakage (EL), leaf Pb, and endogenous NO. An addition experiment was set up to further understand whether NO played role in mitigation of Pb toxicity in maize plants by MT using scavengers of NO and cPTIO combined with the MT treatments. MT-induced tolerance to Pb toxicity was totally eliminated by cPTIO by reversing endogenous NO. The present results clearly indicated that MT mediated the endogenous NO to improve tolerance of maize plants to Pb toxicity. This evidence was also supported by the increases of H2O2 and MDA and reduces some antioxidant enzyme activities tested as well as the plant growth inhibition and increased leaf Pb content by application of MT combined with cPTIO.
Environmental Science and Pollution Research - This study evaluated the impact of Aporrectodea molleri's coelomic fluid-associated bacteria (CFB) on Zea mays L. growth and soil biochemical... 相似文献
The nutritional status of the loquat trees was investigated using cattle manure and commercial fertilizers for three years. The farmyard manure increased N, P, K, Mg, Fe and Zn contents of the leaves. No significant difference was found between the fertilizer types for trunk growth. Yield efficiency was nearly doubled by application of farmyard manure. Fertilizers did not affect the weight and shape of the fruits; however, commercial fertilizers led the lower total acidity in fruits. It was concluded that the loquat trees grown in sandy soils could fulfill their principal nutrient requirements for growth and commercial yield with application of farmyard manure. 相似文献
In this study, the possible utilization of removed shoots and plant parts of banana as compost after fruit harvest were investigated. Three doses (15-30-45 kg plan(-1)) of the compost prepared from the clone of Dwarf Cavendish banana were compared with Farmyard manure (50 kg plant(-1), Mineral fertilizers (180 g N + 150 g P + 335 g K plant(-1)) and Farmyard manure + Mineral fertilizers (25 kg FM + 180 g N + 150 g P + 335 g K plant(-1)) which determined positive effects on the nutrient contents of banana leaves. The banana plants were grown under a heated glasshouse and in a soil with physical and chemical properties suitable for banana growing. The contents of N, P, K and Mg in compost and in farmyard manure were found to be similar. Nitrogen, phosphorus and potassium contents of leaves in all applications except control, and Ca, Mg, Fe, Zn, Mn, Cu contents in all applications were determined between optimum levels of reference values. There were positive correlations among some nutrient contents of leaves, growth, yield and fruit quality characteristics. Farmyard manure, Farmyard manure + Mineral fertilizers and 45 kg plant(-1) of compost increased the nutrient contents of banana leaves. According to obtained results, 45 kg plant(-1) of compost was determined more suitable in terms of economical production and organic farming than the other fertiliser types. 相似文献
FeSO4·xH2O is generated in large amounts in galvanizing workshops. It can be reutilized by conversion to Fe2O3. In this study, the recovery of Fe2O3 from FeSO4·xH2O formed in the galvanizing process has been examined. The experimental work was carried out at various temperatures and times in the oxidizing medium. The reaction temperatures and times were selected as 450, 500, 550, 600, 650, 700, 800 and 900°C, and 15, 30, 45, 60, 90 and 120 minutes, respectively. In order to determine the amount of Fe2O3, a titrimetric method was applied. The reaction products were characterized by means of IR and XRD techniques.The extent of conversion is low at temperatures below 650°C. Almost all of the iron (II) sulfate in the original sample was converted to iron(III) oxide at 650°C (120 min), 700°C (90 min), 800°C (60 min) and 900°C (45 min). 相似文献