Triphenyl methyl phosphonium tosylate as an efficient phase transfer catalyst for ultrasound-assisted oxidative desulfurization of liquid fuel

Environmental Science and Pollution Research - The novel phosphonium-based ionic liquid (IL), triphenyl methyl phosphonium tosylate ([TPMP][Tos]), has been synthesized and applied as a phase...     

Impact of economic policy uncertainty on CO2 emissions: evidence from top ten carbon emitter countries

Environmental Science and Pollution Research - Over the last few decades, economic policy uncertainty (EPU) has surged across the globe. Furthermore, EPU affects economic activities, which may also...     

Influence of overlap between the laser beam tracks on surface quality in laser polishing of AISI H13 tool steel

Polishing by laser beam radiation is a novel manufacturing process to modify the initial surface topography in order to achieve a desired level of surface finish. The performance of laser polishing (LP) is determined by an optimum combination of several key process parameters. In this regard, the overlap between two successive laser beam tracks is one of the important LP process parameters, which has a significant effect over the final surface quality. In the current study, influence of overlap between the laser beam tracks on surface quality was experimentally investigated during the laser polishing of AISI H13 tool steel. Surface areas were polished by using four different overlap percentages (e.g. 80%, 90%, 95%, and 97.5%) while applying the same energy density. The improvement of surface quality was estimated through the analysis of line profiling surface roughness R_a, areal topography surface roughness S_a, and material ratio function. Also, individual components of the surface quality, e.g. waviness and roughness, and their evolution during LP were statistically analyzed using the power spectral density and the transfer functions. Finally, as an example of the best achieved LP result, flat surface area was polished using optimum set of the process parameters improving surface quality by 86.7% through the reduction of an areal topography surface roughness S_a from 1.35 μm to 0.18 μm.     

Magnetic nanoparticles incorporation into different substrates for dyes and heavy metals removal—A Review

Environmental Science and Pollution Research - Substantial discharge of hazardous substances, especially dyes and heavy metal ions to the environment, has become a global concern due to...     

Risk assessment of heavy metal(loid)s via Spinacia oleracea ingestion after sewage water irrigation practices in Vehari District

Environmental Science and Pollution Research - The use of sewage water as an irrigation source can be beneficial in agricultural practices, however, it may result in human health risks due to the...     

Comparative effect of organic amendments on physio-biochemical traits of young and old bean leaves grown under cadmium stress: a multivariate analysis

Environmental Science and Pollution Research - The current study investigated the influence of organic amendments on cadmium (Cd) uptake and its effects on biochemical attributes of young and old...     

Renewable energy in Australia: a wider policy discourse

ABSTRACT

This paper assesses the evolution of generation technology-mix in Australia, with specific emphasis on understanding how such evolution has been shaped by wider political and socio-economic influences. This assessment is predicated on the argument that the contemporary, quintessentially techno-economic, policy discourse on renewable energy is deficient, as it ignores climacteric political and socio-economic influences on generation technology-mix. The methodological framework employed in this paper is informed by the core tenets of technological change theory. The assessment suggests that generation technology-mix in Australia has historically been overwhelmingly influenced by the underlying technological paradigm of the electricity industry; and that this technological paradigm essentially draws its imprimatur from the wider political and socio-economic contexts. By implication, it suggests that a rapid uptake of renewables will have widespread ramifications, extending into political, socio-economic and cultural realms of a society. Clearly, existing policy discourse – that tends to focus on technical potentials, cost competitiveness, externalities and risks of various renewable technologies – is deficient. A much broader discourse is needed. This paper also made an attempt to develop a basis for such a discourse by reviewing broader aspects of the Australian society that would be affected by a rapid uptake of renewables.     

Polycyclic aromatic hydrocarbons and trace metals in mosque’s carpet dust of Riyadh,Saudi Arabia,and their health risk implications

The main objectives of this work were to identify and determine the concentrations of polycyclic aromatic hydrocarbons (PAHs) and trace metals in carpet dust samples from various mosques of the city of Riyadh and to assess the health risks associated with the exposure to these pollutants. Therefore, 31 samples of mosque’s carpet dust from Riyadh were collected. The results showed that 14 PAHs were present in the dust samples with concentrations ranged from 90 to 22,146 ng g^?1 (mean = 4096 ± 4277 ng g^?1) where low molecular weight compounds were dominant. The presence of PAHs were in the order of naphthalene > chrysene and benzo(b)fluoranthene > benzo(a)pyrene > acenaphthene and benzo(k)fluoranthene > pyrene and the absence of indeno(1,2,3-cd)pyrene and dibenz(a,h)anthracene. The diagnostic ratio coupled with principle component analysis (PCA) revealed mix sources of petrogenic from traffic, stack emission, and pyrogenic inputs from essence and perfumed wood burning. Trace metals were significant in the dust samples, and their concentrations decrease in the order of Zn, Mn, Cu, Cr, Pb, Ni, and V where Zn being the highest (94.4 ± 91.5 μg g^?1) and indium was the lowest (1.9 ± 9.3 μg g^?1). The trace metals were major in southern and central parts of Riyadh and followed the order of central Riyadh > southern Riyadh > western Riyadh > eastern Riyadh > northern Riyadh. Estimated risk based on the total PAHs was found to be 4.30 × 10^?11 for adult and 1.56 × 10^?11 for children. Elemental non-cancer risk for adults ranged from 7.9 × 10^?4 for Co to 7.58 × 10^?1 for Li and for children ranged from 3.70 × 10^?3 for Co to 3.54 for Li. Policy implication and mitigations of PAHs in Riyadh and Saudi Arabia were highlighted.     

The effect of changing the fuel of the LASTFIRE test

The LASTFIRE test is intended for the evaluation of foams used in extinguishing fires of flammable and combustible liquids in storage tanks in refinery and oil related facilities. The purpose of this study is to find, experimentally, an alternative fuel to be used in the LASTFIRE test, as a replacement for the heptane fuel, which is normally used in this test. Beside heptane, three other fuels are tested in the current study: diesel, jet A1 and kerosene. The study involved performing the LASTFIRE test, using each of the fuels and then comparing the results. The same foam is used as an extinguishing agent for all the tests and for each fuel, tests are conducted three times with separate foam discharging nozzles: semi-aspirated, aspirated and system. Using a commonly used scoring system, the results of the four fuels are evaluated. Any replaceable fuel should obtain the similar score as that is obtained by heptane. The study shows that none of the three alternatives has been judged to be suitable to replace heptane, in the LASTFIRE test.