Dissipation of chlorpyrifos in two soil environments of semi-arid India

The dissipation of chlorpyrifos (20 EC) at environment-friendly doses in the sandy loam and loamy sand soils of two semi-arid fields and the presence of pesticide residues in the harvested groundnut seeds, were monitored. The movement of chlorpyrifos through soil and its binding in the loamy sand soil was studied using 14C chlorpyrifos. Chlorpyrifos was moderately stable in both loamy sand and sandy loam soils, with half-life of 12.3 and 16.4 days, respectively. With 20 EC treatments the dissipation was slower for standing crop than seed treatment, indicative of the high degradation rates in the bioactive rhizosphere. In soil, 3,5,6-trichloro-2-pyridinol (TCP) was the principal breakdown product. Presence of 3,5,6-trichloro-2-methoxypyridine (TMP), the secondary metabolite, detected in the rhizospheric samples during this study, has not been reported earlier in field soils. The rapid dissipation of the insecticide from the soil post-application might have resulted from low sorption due to the alkalinity of the soil and its low organic matter content, fast topsoil dissipation possibly by volatilization and photochemical degradation, aided by the low water solubility, limited vertical mobility due to confinement of residues to the upper 15 cm soil layers and microbial mineralization and nucleophilic hydrolysis. Contrary to the reports of relatively greater mobility of its metabolites in temperate soils, TMP and TCP remained confined to the top 15 cm soil. The formation of bound residues (half-life 13.4 days) in the loamy sand soil was little and not "irreversible." A decline in bound residues could be correlated to decreasing TCP concentration. Higher pod yields were obtained from pesticide treated soils in comparison to controls. Post-harvest no pesticide residues were detected in the soils and groundnut seeds.     

Synthesis of nanoparticles using microorganisms and their applications: a review

Environmental Chemistry Letters - Nanoparticles synthesis under green conditions has been performed using natural resources to diminish the use of toxic chemicals. For instance, microbial synthesis...     

Ag@MnxOy: an effective catalyst for photo-degradation of rhodamine B dye

Environmental Chemistry Letters - Water pollution by the textile industry is a major issue. Therefore, there is a need for methods to remove organic dyes from industrial effluents. Various...     

Sub-lethal effect of chlorpyrifos on protein metabolism of the food fish Clarias batrachus and monitoring of recovery

The effect of sub-lethal concentrations of chlorpyrifos on protein metabolism in physiological important tissues, namely gills, kidney, liver, and muscle of the freshwater fish, Clarias batrachus, was studied. Fish were exposed to 1/20th and 1/10th of 96?h LC₅₀ concentrations for 7, 14, 21, and 28 days. After 28 days of exposure, fish were released into fresh water and kept in the same for 21 days in order to study the recovery. Fish were sacrificed at the stipulated periods and gills, kidney, liver, and muscle tissues were used for the estimation of total protein, amino acids, ammonia, urea, glutamine, protease, transaminases, and phosphatases. Total protein, amino acid, and ammonia contents were decreased in all tissues for 28 days and recovery was observed during the recovery period. Urea and glutamine levels were elevated, except in kidneys, and recovered at the end of the recovery period. The activities of protease, alanine, and aspartate aminotransferases, and acid and alkaline phosphatases were elevated in the tissues for 28 days exposure at both concentrations. Recovery of these enzymes activities was noticed during depuration.     

Synthesis and application of graphene-based sensors in biology: a review

Environmental Chemistry Letters - Biosensors are gaining interest in biomedical and environmental sciences. In particular, graphene-based biosensors are promising due to the unique properties of...     

Novel Mercury Oxidant and Sorbent for Mercury Emissions Control from Coal-fired Power Plants

The authors have successfully developed novel efficient and cost-effective sorbent and oxidant for removing mercury from power plant flue gases. These sorbent and oxidant offer great promise for controlling mercury emissions from coal-fired power plants burning a wide range of coals including bituminous, sub-bituminous, and lignite coals. A preliminary analysis from the bench-scale test results shows that this new sorbent will be thermally more stable and cost-effective in comparison with any promoted mercury sorbents currently available in the marketplace. In addition to the sorbent, an excellent elemental mercury (Hg(0)) oxidant has also been developed, and will enable coal-fired power plants equipped with wet scrubbers to simultaneously control their mercury emissions as well as their sulfur oxides emissions. This will work by converting all elemental mercury to an oxidized form which will be removed by the wet scrubber. This will result in significant cost savings for mercury emissions control to the atmosphere, and will help in keeping electric costs low. The sorbent and oxidant will benefit from the utilization of a waste stream from the printed circuit board (PCB) industry, and would thus be environmentally beneficial to both of the utility and electronics industries. The sorbent also demonstrated thermal stability up to 350°C, suggesting a possibility of an application in pulverized coal-fired power plants equipped with hot-side electrostatic precipitators and coal gasification plants.     

A first approximation kinetic model to predict methane generation from an oil sands tailings settling basin

A small fraction of the naphtha diluent used for oil sands processing escapes with tailings and supports methane (CH(4)) biogenesis in large anaerobic settling basins such as Mildred Lake Settling Basin (MLSB) in northern Alberta, Canada. Based on the rate of naphtha metabolism in tailings incubated in laboratory microcosms, a kinetic model comprising lag phase, rate of hydrocarbon metabolism and conversion to CH(4) was developed to predict CH(4) biogenesis and flux from MLSB. Zero- and first-order kinetic models, respectively predicted generation of 5.4 and 5.1 mmol CH(4) in naphtha-amended microcosms compared to 5.3 (+/-0.2) mmol CH(4) measured in microcosms during 46 weeks of incubation. These kinetic models also predicted well the CH(4) produced by tailings amended with either naphtha-range n-alkanes or BTEX compounds at concentrations similar to those expected in MLSB. Considering 25% of MLSB's 200 million m(3) tailings volume to be methanogenic, the zero- and first-order kinetic models applied over a wide range of naphtha concentrations (0.01-1.0 wt%) predicted production of 8.9-400 million l CH(4) day(-1) from MLSB, which exceeds the estimated production of 3-43 million l CH(4) day(-1). This discrepancy may result from heterogeneity and density of the tailings, presence of nutrients in the microcosms, and/or overestimation of the readily biodegradable fraction of the naphtha in MLSB tailings.     

Controlled release formulations of metribuzin: Release kinetics in water and soil

Controlled release (CR) formulations of metribuzin in Polyvinyl chloride [(PVC) (emulsion)], carboxy methyl cellulose (CMC), and carboxy methyl cellulose-kaolinite composite (CMC-KAO), are reported. Kinetics of its release in water and soil was studied in comparison with the commercial formulation (75 DF). Metribuzin from the commercial formulation became non-detectable after 35 days whereas it attained maxima between 35–49 days and became non-detectable after 63 days in the developed products. Amongst the CR formulations, the release in both water and soil was the fastest in CMC and slowest in PVC. The CMC-KAO composite reduced the rate of release as compared to CMC alone. The diffusion exponent (n value) of metribuzin in water and soil ranged from 0.515 to 0.745 and 0.662 to 1.296, respectively in the various formulations. The release was diffusion controlled with half release time (t_1/2) from different controlled release matrices of 12.98 to 47.63 days in water and 16.90 to 51.79 days in soil. It was 3.25 and 4.66 days, respectively in the commercial formulation. The period of optimum availability of metribuzin in water and soil from controlled released formulations ranged from 15.09 to 31.68 and 17.99 to 34.72 days as against 5.03 and 8.80 days in the commercial formulation.     

Progress in carbon dioxide separation and capture： A review

This article reviews the progress made in CO2 separation and capture research and engineering. Various technologies, such as absorption, adsorption, and membrane separation, are thoroughly discussed. New concepts such as chemical-looping combustion and hydrate-based separation are also introduced briefly. Future directions are suggested. Sequestration methods, such as forestation, ocean fertilization and mineral carbonation techniques are also covered. Underground injection and direct ocean dump are not covered.