Stability of a Coal Waste Artificial Reef

The feasibility of using U.K. coal-fired power station waste materials for artificial reef production is being examined. in June, 1989, an experimental artificial reef was constructed in Poole Bay, off the central south coast of the U.K., using three different mixtures of pulverised fuel ash (PFA), flue gas desulphurisation (FGD) gypsum and slurry, stabilized with cement and formed into blocks. Fifty tonnes of 40 × 20 × 20 cm blocks were formed into eight conical reef units replicating three different PFA/gypsum mixtures and one concrete control. the reef structure is 10m below chart datum on a flat sandy sea-bed.

Combustion of coal concentrates the heavy metal content in the resultant ash. the purpose of stabilization of the ash as blocks is twofold: to immobilize heavy metals (or other components) and to provide hard substratum for the attachment of organisms. to examine the effectiveness of this stabilization and hence the environmental compatibility of the block materials, heavy metal (Cd, Cr, Cu, Pb, Mn, Ni, Zn) content of the blocks has been monitored routinely over two years, to determine leaching rates. Sectional profiles indicate partial replacement of calcium content by magnesium. Associated with this there has also been some redistribution of heavy metals. Only in the case of cadmium has there been a detectable loss from the surface of blocks. Chromium and manganese concentrations appear to have increased. the metal content of the reef epibiota (including ascidians, Ascidia mentula; hydroids, Halecium spp.; bryozoans, Bugula spp. and red algae) growing on the ash blocks has been compared to that of epibiota attached to the concrete controls and surrounding sea-bed. to date no evidence of excess bioaccumulation of metals has been detected.

The physical integrity of the ash reef blocks has been maintained. There is evidence that the blocks are increasing in compressive strength.

An indication of the fishery enhancement potential of the experimental structure is given by the presence of eight commercially fished species (crustaceans and molluscs) including lobsters (Homarus gammarus).     

Postfledging Dispersal of White-crowned Pigeons: Implications for Conservation of Deciduous Seasonal Forests in the Florida Keys

From 1988 to 1991, we studied the postfledging dispersal of 31 radio-tagged White-crowned Pigeons ( Columba leucocephala ) from three natal keys in Florida Bay. Immature birds dispersed from the natal keys at 26–45 days after batching, and most young dispersed more than 20 km during the first 10 days postdispersal. Dispersing birds flew either north to the Florida mainland or east to northeast to the mainline Florida Keys. On the mainland, immature birds fed nearly exclusively within Everglades National Park or an adjacent state wildlife management area. On the mainline keys, White-crowned Pigeons selectively used 5.01–20 ha forest fragments (p < 0.10) during the first 72 hours postdispersal. After this period, dispersing birds showed no preference among fragment size classes but used deciduous seasonal forests more frequently than suburban habitat(p < 0.10). The spatial pattern of dispersal on the mainline keys suggests that, during the first 72 hours postdispersal. White-crowned Pigeons are not able to reach northern Key Largo, where 69% of the deciduous seasonal forests are protected in state or federal ownership. Protection of large forest fragments, especially on southern Key Largo, should be a priority for maintaining populations of White-crowned Pigeons. These forests provide a series of "stepping stones" that enable dispersing immature White-crowned Pigeons to fly to more distant areas where habitat availability is less restricted. This species is threatened in Florida and may play an important role in maintaining plant species diversity in the seasonal deciduous forests of south Florida by dispersing seeds of at least 37 species of trees and shrubs. Protection of sufficient habitat to allow successful postfledging dispersal of this important seed disperser will also protect the ecosystem's biodiversity.     

Effects of calcium hydroxide and calcium chloride addition to bentonite in iron ore pelletization.

Pyrite ash is created as waste from the roasting of pyrite ores during the production of sulphuric acid. These processes generate great amounts of pyrite ash waste that is generally land filled. This creates serious environmental pollution due to the release of acids and toxic substances. Pyrite ash waste can be utilized in the iron production industry as a blast furnace feed to process this waste and prevent environmental pollution. The essential parameters affecting the pelletization process of pyrite ash were studied using bentonite as a binder. Experiments were then carried out using bentonite and a mixture of bentonite with calcium hydroxide and calcium chloride in order to make the bentonite more effective. The metallurgical properties of pyrite ash, bentonite, calcium hydroxide, calcium chloride, a mixture of these and sintered pellets were studied using X-ray analysis. The crushing strength tests were carried out to investigate the strength of pyrite ash waste pellets. The results of these analyses showed that pyrite ash can be agglomerated to pellets and used in the iron production industry as a blast furnace feed. The crushing strength of the pellets containing calcium hydroxide and calcium chloride in addition to bentonite was better than the strength of pellets prepared using only bentonite binder.     

Stabilimenta characteristics of the spider Argiope argentata on small islands: support of the predator-defense hypothesis

Summary A variety of orb-weaving spider species construct stabilimenta, patterned areas of dense silk, typically near the hub of the orb. The adaptive significance of this construction, along with associated behaviors such as shuttling and vibrating, is much debated. Arigiope argentata on small islands of the Bahamas frequently possess stabilimenta; we studied 397 individuals of this species to investigate possible functions of their stabilimenta, paying particular attention to predator-defense hypotheses. Cruciform stabilimenta were commoner in all size classes of spiders than discoid stabilimenta or no stabilimentum at all; discoid stabilimenta occurred mostly among intermediate size classes. Within the cruciform type, two-segmented stabilimenta were especially common among the very smallest spiders. Size of cruciform stabilimenta showed a curvilinear relation to spider body length; the fitted curve for total segment length had a maximum at an intermediate spider length. We argue that this relationship (among other phenomena) supports an apparently-larger-size hypothesis, whereby intermediate-sized spiders in particular appear much larger than they actually are. This could discourage predators, including those that are gape-limited such as lizards. We argue that stabilimenta in the smallest spiders, in which typically two segments are opposed, so that they more or less line up, serve as camouflage. When disturbed experimentally, spiders with discoid stabilimenta shuttle to the opposite side of the centrally located stabilimentum. This seems an obvious defensive behavior and occurs less frequently among spiders with cruciform stabilimenta. Large spiders vibrate more frequently than small ones, but no relation exists between vibration frequency and stabilimentum type. We argue (see also Tolbert 1975) that vibrating behavior, in which the spider can become a blur, renders its location more difficult to discern and the spider more difficult to grasp, rather than increasing apparent size. Correspondence to: T.W. Schoener     

EPA's monitoring program at Love Canal 1980

Summary As stated at the beginning of this paper conclusions reached thus far cannot be discussed in this paper. However, a great deal of information is available for examination.EPA displayed its ability to coordinate widely separated laboratories, both Federal and private, into a smooth working team in a very short period of time. A very comprehensive study plan was also developed and implemented quickly. EPA was fortunate to have already had GCA under contract when the emergency arose. In no small part the success of the field effort was due to the managerial and technical abilities of the GCA team.Within a period of 6 weeks a plan was developed, a prime contractor retained, subcontractors hired, and field activities begun. Within a period of 3 months in excess of 8600 field samples were collected and over 12,000 field and QC samples were analyzed. During this same period 2 major data systems were developed, debugged, and placed into operation.In short this EPA project was probably the most comprehensive multimedia field project ever attempted by EPA and certainly the data is being subjected to the most strenuous quality control measures ever imposed by this Agency. The entire program is presently under peer review and the results are being prepared for publication by EPA Headquarters.Note. Originally intended to be published as part of the special issue on Exposure Monitoring: An International Workshop (Las Vegas, Nevada, October 19–22, 1981).